Journal Article10.1016/S0961-9534(00)00038-6
Bamboo: an overlooked biomass resource?
741
TL;DR: Bamboo is the common term applied to a broad group (1250 species) of large woody grasses, ranging from 10 cm to 40 cm in height as discussed by the authors, and it shares a number of desirable fuel characteristics with certain other bioenergy feedstocks, such as low ash content and alkali index.
read more
Abstract: Bamboo is the common term applied to a broad group (1250 species) of large woody grasses, ranging from 10 cm to 40 m in height. Already in everyday use by about 2.5 billion people, mostly for fiber and food within Asia, bamboo may have potential as a bioenergy or fiber crop for niche markets, although some reports of its high productivity seem to be exaggerated. Literature on bamboo productivity is scarce, with most reports coming from various parts of Asia. There is little evidence overall that bamboo is significantly more productive than many other candidate bioenergy crops, but it shares a number of desirable fuel characteristics with certain other bioenergy feedstocks, such as low ash content and alkali index. Its heating value is lower than many woody biomass feedstocks but higher than most agricultural residues, grasses and straws. Although non-fuel applications of bamboo biomass may be actually more profitable than energy recovery, there may also be potential for co-production of bioenergy together with other bamboo processing. A significant drawback is the difficulty of selective breeding, given the lack of knowledge of flowering physiology. Further research is also required on propagation techniques, establishment and stand management, and mechanized harvesting needs to be developed.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
Multi-scale hybrid biocomposite: Processing and mechanical characterization of bamboo fiber reinforced PLA with microfibrillated cellulose
TL;DR: In this article, a hybrid biocomposites based upon a biodegradable poly(lactic acid) (PLA) matrix reinforced with microfibrillated cellulose (MFC) and bamboo fiber bundles was developed.
Lignification in developing culms of bamboo Sinobambusa tootsik
Taku Tsuyama,Natsumi Shimada,Taichi Motoda,Yasuyuki Matsushita,Yoshio Kijidani,Kazuhiko Fukushima,Ichiro Kamei +6 more
TL;DR: In this article, the authors studied lignification in the bamboo Sinobambusa tootsik during culm development and found that the lignin content was approximately half that in mature culms.
Precise microcasting revealing the connectivity of bamboo pore network
Rong Liu,Shuqin Zhang,Kate Semple,Caiping Lian,Meiling Chen,Junji Luo,Feng Yang,Chunping Dai,Benhua Fei +8 more
TL;DR: In this paper, an improved microcasting approach is proposed, in which maleic anhydride pre-treatment ensures a close fit between the cell wall and casting resin and toughens the final casts.
Estimation of recycled bamboo availability and investigation of its potential utilization after value-addition through dual fuel cookstoves
Imlisongla Aier,Ujjiban Kakati,Virendra Kumar Vijay,Priyanka Kaushal +3 more
Developing co-culture system of dominant cellulolytic Bacillus sp. THLA0409 and dominant ethanolic Klebsiella oxytoca THLC0409 for enhancing ethanol production from lignocellulosic materials
TL;DR: The co-culture showed a potential bacterial source for ethanol production from lignocelluloses, and remarkably enhanced utilization efficiency of hydrolysates from acid-pretreated raw bamboo, Napiergrass, rice straw and ethanol production.
References
Wood: chemistry, ultrastructure, reactions.
Dietrich Fengel,Gerd Wegener +1 more
- 31 Jan 1983
TL;DR: The anatomy and chemistry of wood are described in detail, and with extensive reference to the literature, under the following headings: Introduction; Structure and ultrastructure; Chemical composition and analysis of wood; Cellulose; Polyoses (hemicelluloses); Lignin; Extractives; Distribution of the components within the wood cell wall; Constituents of bark; Reactions in acidic medium; reactions in alkaline medium; Influence of temperature; Degradation by light and ionizing rays; Microbial and enzymatic degradation; Aging and fossilization; Pul
3.1K
The Determination of Lignin
C. W. Dence
- 01 Jan 1992
TL;DR: The determination of lignin is an analysis that is performed routinely for characterizing lignocellulosic material, for assessing the effects of chemical, physical, and biological treatments of wood and pulp, for monitoring effluents in wood processing industries and, in the case of chemical pulps, for estimating bleach chemical requirements as mentioned in this paper.
701
The behavior of inorganic material in biomass-fired power boilers: Field and laboratory experiences
Larry L. Baxter,T. R. Miles,Bryan M. Jenkins,Thomas A. Milne,David C. Dayton,R. W. Bryers,Larry L. Oden +6 more
TL;DR: Alkali Deposits Investigation (ADI) as mentioned in this paper was a collaborative effort to understand the causes of unmanageable ash deposits in biomass-fired electric power boilers.
700
Boiler deposits from firing biomass fuels
TL;DR: The results of the laboratory and power plant tests which included: tracking and analyzing fuels and deposits by various methods; recording operating conditions; and extensive laboratory testing have advanced the understanding of the role of minerals in the combustion of biomass, and their occurrence in biofuels as discussed by the authors.
439