Open Access
Application of Average Flow Model to Lubrication Between Rough Sliding Surfaces
N. Patir
- 01 Jan 1979
Vol. 101, pp 220-230
795
About: The article was published on 01 Jan 1979. and is currently open access. The article focuses on the topics: Lubrication.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
•Journal Article
Mixed Lubrication of Hydrostatic Thrust Bearings. 2nd Report. Experiment.:2nd Report, Experiment
TL;DR: In this paper, the authors measured the frictional force and leakage flow rate under a lubrication range from mixed to fluid film and found that the minimum power losses are given by the ratio of hydrostatic balance being close to unity independent of the surface roughness, the loads, the speed of rotation and the restrictors.
Optimization of Hybrid Journal Bearing using Artificial Neural Network and Genetic Algorithm
TL;DR: Achievement of regression value above 99% and close agreement between expected and predicted value of all the three output functions shows the suitability of ANN in Multi-objective Genetic Algorithm optimization problem.
Development of Piston and Piston Ring Lubrication Analysis
Yuichiro Kimura,Motoichi Murakami,H. Bouassida,Yann Tanguy,Yann Gabriel Drouvin,N. Biboulet,Antonius Lubrecht +6 more
TL;DR: In this paper, the authors established a calculation model for estimating piston and piston ring friction and showed how the accuracy of the calculation model was improved by validating against measurements, which showed that the piston counts for a large percentage of the friction losses.
Quantification of oil film thickness on the top ring sliding surface by visualization
Akito Watanabe,Kenta Sato,Moritsugu Kasai,Hisanobu Kawashima,Hidekazu Suzuki,Tsuneaki Ishima +5 more
TL;DR: In this article , the authors measured the oil film thickness on the sliding surface of the top ring from the oil visualization images and verified the measured film thickness carried out by comparing with the data obtained from numerical calculation.