Journal Article10.1109/MSP.2005.1550190
Analog-to-digital converters
TL;DR: In this paper, the internal relationships of the performance parameters of ADCs, showing their frequency dependency and structure dependency, were analyzed and the history and current trends in ADC technologies based on the P and F figures-of-merit were also reviewed.
read more
Abstract: This paper analyzed the internal relationships of the performance parameters of ADCs, showing their frequency dependency and structure dependency. The history and current trends in ADC technologies based on the P and F figures-of-merit were also reviewed. Historically, there was an increase in performance around 1994, with a share rise around 1997, which broke the stagnant performance discussed by Waiden (1999). While the past few years have shown a sharp increase in ADC performance, we have shown that performance and power dissipation depend greatly on the ADC structure and the target applications. With the progression of wideband radio systems like UWB and OFDM comes a growing demand to provide faster sampling rates and higher resolutions with lower power dissipation. With the innovation of advanced communication techniques like multi-input/multi-output and multistandard radios, the demand is growing to provide multichannel programmable data conversion, both of which are pushing the performance of ADCs further in the coming years.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
MUX Based Flash ADC for Reduction in Number of Comparators
Cherry Bhargava,Vivek Mody,Navjot Rathour,Sandeep Bansal +3 more
- 19 Apr 2018
TL;DR: This proposed 6-bit 200 MSPS ADC is designed and simulated in cadence tools with 1 V supply voltage using 90nm CMOS technology and results into effective number of bits and figure of merit of 0.019 pJ/conversion-step for 200 MS/s.
2
Bayesian Channel Tracking and AoA Acquisition in Millimeter Wave MIMO Systems with Low-Resolution ADCs
12 Sep 2022
TL;DR: In this paper , a variational inference joint channel tracking and data detection (VIJ-CTDD) algorithm is proposed to enhance the tracking without extra pilot overhead, in which the detected data symbols are reused to improve the tracking performance.
2
Sub-Nyquist Sampling OFDM Radar
Kawon Han,Seong-Hyeon Kang,Songcheol Hong +2 more
TL;DR: Sub-Nyquist sampling OFDM radar system capable of reducing ADC sampling rate without additional hardware manipulations. The system utilizes known modulation symbols to unfold the folded signal and estimate target ranges with the range resolution of the full signal bandwidth. However, symbol-mismatch noise (SMN) significantly degrades the signal-to-noise ratio (SNR) of the detected targets. A symbol-mismatch noise cancellation (SMNC) technique is proposed to resolve this issue.
2
Channel Alignment for Hybrid Beamforming in Millimeter Wave Multi-User Massive MIMO
Nuan Song,Huan Sun,Qingchuan Zhang,Tao Yang +3 more
- 01 Dec 2017
TL;DR: To assist hybrid beamforming in multi-user massive Multiple Input Multiple Output (MIMO) systems at millimeter wave frequencies, the Auxiliary Processing Network (APN) based multi-phase channel alignment techniques are proposed.
2
•Posted Content
An Energy Efficiency Perspective on Massive MIMO Quantization
TL;DR: In this article, the authors performed a parametric energy efficiency analysis of massive MIMO uplink for the entire base station receiver system with varying ADC resolutions and showed that, for a wide variety of system parameters, ADCs with intermediate bit resolutions (4 - 10 bits) are optimal in energy efficiency sense.
1
References
Analog-to-digital converter survey and analysis
TL;DR: The state-of-the-art of ADCs is surveyed, including experimental converters and commercially available parts, and the distribution of resolution versus sampling rate provides insight into ADC performance limitations.
An overview of sigma-delta converters
TL;DR: This article describes conventional A/D conversion, as well as its performance modeling, and examines the use of sigma-delta converters to convert narrowband bandpass signals with high resolution.
739
•Book
Software radio: a modern approach to radio engineering
Jeffrey H. Reed
- 20 May 2002
TL;DR: Software Radio: A Modern approach to Radio Engineering systematically reviews the techniques, challenges, and tradeoffs of DSP software radio design to help engineers build advanced wireless systems.
587
Jitter analysis of high-speed sampling systems
TL;DR: The jitter of such practical sampling systems as analog-to-digital converters, sample-and-hold circuits, and samplers is discussed and a model for estimating jitter is proposed, based on sampling sine-wave signal- to-noise ratio calculations.
381
Jitter analysis of high speed sampling systems
Shinagawa,Akazawa,Wakimoto +2 more
- 25 May 1989
TL;DR: It will be shown that effective band-width compro-ation between jitter reduction and operating speed are important for more advanced converter design, and accuracy and speed limitations of the converter will be discussed.
146