An open-source modeling tool for multi-objective optimization of renewable nano/micro-off-grid power supply system: Influence of temporal resolution, simulation period, and location

TL;DR: In this article, a three-state energy prosumers (TSEPs) model is proposed to facilitate flexible dispatching of RESs and an economic smart generation control (ESGC) framework is designed to replace the traditional multiple time-scales framework.

TL;DR: In this paper , a high-temporal and long-term power flow simulation approach is applied to a multi-objective optimization algorithm to minimize costs and grid energy feed-out.

TL;DR: In this article , the authors presented a grid-connected hybrid renewable energy system (HRES) that comprises utility grid, PV, battery system (BS) and load, and the results showed that the two-axis tracking system is more techno-economic feasible when compared with the fixed tilted plane and vertical axis tracking system.

TL;DR: In this article , an evaluation of power smoothing is performed for a renewable hydrokinetic on grid system using a supercapacitor and the power fluctuations are mitigated by the proposed energy control and supplied to the utility grid and household load.

TL;DR: In this article, the mechanisms of lithium-ion battery ageing are reviewed and evaluated, and the most promising candidate as the power source for (hybrid) electric vehicles and stationary energy storage.

TL;DR: In this paper an extensive, quantitative comparison is presented, applying four multiobjective evolutionary algorithms to an extended 0/1 knapsack problem.

TL;DR: In this article, a general energy balance for battery systems has been developed, which is useful for estimating cell thermal characteristics, such as temperature, phase changes, mixing effects, and joule heating.

TL;DR: Experimental results indicated that the capacity loss was strongly affected by time and temperature, while the DOD effect was less important, and attempts in establishing a generalized battery life model that accounts for Ah throughput, C-rate, and temperature are discussed.