Open Access
An efficient algorithm using matrix methods to solve wind tunnel force-balance equations
D. L. Smith
- 01 Aug 1972
TL;DR: An iterative procedure applying matrix methods to accomplish an efficient algorithm for automatic computer reduction of wind-tunnel force-balance data has been developed, and computational times on the order of one-third or less are demonstrated by use of this new program.
read more
Abstract: An iterative procedure applying matrix methods to accomplish an efficient algorithm for automatic computer reduction of wind-tunnel force-balance data has been developed. Balance equations are expressed in a matrix form that is convenient for storing balance sensitivities and interaction coefficient values for online or offline batch data reduction. The convergence of the iterative values to a unique solution of this system of equations is investigated, and it is shown that for balances which satisfy the criteria discussed, this type of solution does occur. Methods for making sensitivity adjustments and initial load effect considerations in wind-tunnel applications are also discussed, and the logic for determining the convergence accuracy limits for the iterative solution is given. This more efficient data reduction program is compared with the technique presently in use at the NASA Langley Research Center, and computational times on the order of one-third or less are demonstrated by use of this new program.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
A Wind Tunnel Model to Explore Unsteady Circulation Control for General Aviation Applications
Christopher M. Cagle,Gregory S. Jones +1 more
- 01 Jan 2002
TL;DR: In this article, a wind tunnel model that implements unsteady circulation control by pulsing internal pneumatic valves is described, and some preliminary results from the first test entry are reported.
Pneumatic Flap Performance for a 2D Circulation Control Airfoil, Steady and Pulsed
Gregory S. Jones
- 01 Jun 2005
TL;DR: In this article, the authors describe airfoil and blown high lift concepts that also address cruise drag reduction and reductions in mass flow through the use of pulsed pneumatic blowing on a Coanda surface.
23
NASA LaRC Strain Gage Balance Design Concepts
Ray D. Rhew
- 01 Mar 1999
TL;DR: Strain-gage balance concepts have been developed over the years including material selection, sting, model interfaces, measuring, sections, fabrication, strain-gaging and calibration as discussed by the authors, which can be applied to all force measurement design applications.
16
Adapting second‐order response surface designs to specific needs
TL;DR: Responsible surface methods were used to reduce the number of calibration runs required during the labor-intensive heavy load calibration, to leverage the prediction capabilities of response surface designs, and to provide an estimate of uncertainty for the calibration models.
14
Uncertainty Estimates and Prediction Interval Development for Internal Strain Gage Balance Calibration Systems
Kenneth G. Toro
- 01 Jan 2015
TL;DR: In this article, uncertainty estimates were integrated into the developed prediction interval, which demonstrated a capture rate of 96% for a trial set of check loads using a 95% level of condence.