Journal Article10.1002/CSSC.200900036
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
2.4K
TL;DR: The CO(2) adsorption behavior of several different classes of solid carbon dioxide adsorbents, including zeolites, activated carbons, calcium oxides, hydrotalcites, organic-inorganic hybrids, and metal-organic frameworks are described.
read more
Abstract: Since the time of the industrial revolution, the atmospheric CO(2) concentration has risen by nearly 35 % to its current level of 383 ppm. The increased carbon dioxide concentration in the atmosphere has been suggested to be a leading contributor to global climate change. To slow the increase, reductions in anthropogenic CO(2) emissions are necessary. Large emission point sources, such as fossil-fuel-based power generation facilities, are the first targets for these reductions. A benchmark, mature technology for the separation of dilute CO(2) from gas streams is via absorption with aqueous amines. However, the use of solid adsorbents is now being widely considered as an alternative, potentially less-energy-intensive separation technology. This Review describes the CO(2) adsorption behavior of several different classes of solid carbon dioxide adsorbents, including zeolites, activated carbons, calcium oxides, hydrotalcites, organic-inorganic hybrids, and metal-organic frameworks. These adsorbents are evaluated in terms of their equilibrium CO(2) capacities as well as other important parameters such as adsorption-desorption kinetics, operating windows, stability, and regenerability. The scope of currently available CO(2) adsorbents and their critical properties that will ultimately affect their incorporation into large-scale separation processes is presented.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
High surface area metal salt templated carbon aerogels via a simple subcritical drying route: preparation and CO2 uptake properties
Eric Masika,Robert Mokaya +1 more
TL;DR: In this article, a method for the formation of high surface area carbon aerogels from melamine-formaldehyde resins via metal salt (CaCl2) templating, wherein subcritical drying is used and no activation is required.
49
Mesoporous carbon adsorbents from melamine-formaldehyde resin using nanocasting technique for CO2 adsorption.
TL;DR: Adsorbent synthesized at 700°C was found to have the highest surface area and surface basicity along with maximum CO2 adsorption capacity among the synthesized adsorbents.
49
Sorbents with high efficiency for CO2 capture based on amines-supported carbon for biogas upgrading.
TL;DR: Sorbents for CO2 capture prepared by wet impregnation of a commercial active carbon with two CO2-philic compounds, polyethylenimine and tetraethylenepentamine, have revealed an appreciable CO2 separation selectivity.
49
The effect of nitrogen adsorption on vacuum swing adsorption based post-combustion CO2 capture
TL;DR: In this article, the authors evaluated the importance of nitrogen adsorption on post-combustion CO2 capture using vacuum swing adaption and demonstrated that the energy required to remove N2 can play an important role in determining the total parasitic energy of the process.
49
A novel method for the preparation of CO2 sorption sorbents with high performance
TL;DR: In this article, a novel method for the synthesis of solid amine sorbents integrated into alumina-extraction from fly ash (FA) has been developed, which exhibit improved sorption performance and can be produced with a reasonable cost.
49
References
•Book
Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing
C. Jeffrey Brinker,George W. Scherer +1 more
- 12 May 1990
TL;DR: Gel-Derived and Conventional Ceramics: as discussed by the authors Theoretical analysis of deformation and flow in gels and a comparison of gel-derived and conventional ceramics.
10.6K
Systematic Design of Pore Size and Functionality in Isoreticular MOFs and Their Application in Methane Storage
Mohamed Eddaoudi,Jaheon Kim,Nathaniel L. Rosi,David T. Vodak,Joseph Wachter,Michael O'Keeffe,Omar M. Yaghi +6 more
TL;DR: Metal-organic framework (MOF-5), a prototype of a new class of porous materials and one that is constructed from octahedral Zn-O-C clusters and benzene links, was used to demonstrate that its three-dimensional porous system can be functionalized with the organic groups and can be expanded with the long molecular struts biphenyl, tetrahydropyrene, pyrene, and terphenyl.
7.8K
Design and synthesis of an exceptionally stable and highly porous metal-organic framework
TL;DR: In this article, an organic dicarboxylate linker is used in a reaction that gives supertetrahedron clusters when capped with monocarboxyates.
Metal-organic frameworks with exceptionally high capacity for storage of carbon dioxide at room-temperature
Omar M. Yaghi,Andrew R. Millward +1 more
TL;DR: A carbon dioxide storage system includes a container and a conduit attached to the container for introducing or removing a carbon dioxide-containing composition from the container as mentioned in this paper, which is positioned within the container.
2.3K
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program ☆
TL;DR: The current status of the development of CO2 capture technology is discussed in this article, where a wide variety of separation techniques are being pursued, including gas phase separation, absorption into a liquid, and adsorption on a solid, as well as hybrid processes, such as adhesions/membrane systems.
2.2K