Journal Article10.1002/ADMA.201700981
3D-Printed, All-in-One Evaporator for High-Efficiency Solar Steam Generation under 1 Sun Illumination.
Yiju Li,Tingting Gao,Zhi Yang,Chaoji Chen,Wei Luo,Jianwei Song,Emily Hitz,Chao Jia,Yubing Zhou,Boyang Liu,Bao Yang,Liangbing Hu +11 more
645
TL;DR: The 3D-printed porous evaporator with intrinsic low thermal conductivity enables heat localization and effectively alleviates thermal dissipation to the bulk water and has a high solar steam efficiency under 1 sun illumination, among the best compared with other reported evaporators.
read more
Abstract: Using solar energy to generate steam is a clean and sustainable approach to addressing the issue of water shortage. The current challenge for solar steam generation is to develop easy-to-manufacture and scalable methods which can convert solar irradiation into exploitable thermal energy with high efficiency. Although various material and structure designs have been reported, high efficiency in solar steam generation usually can be achieved only at concentrated solar illumination. For the first time, 3D printing to construct an all-in-one evaporator with a concave structure for high-efficiency solar steam generation under 1 sun illumination is used. The solar-steam-generation device has a high porosity (97.3%) and efficient broadband solar absorption (>97%). The 3D-printed porous evaporator with intrinsic low thermal conductivity enables heat localization and effectively alleviates thermal dissipation to the bulk water. As a result, the 3D-printed evaporator has a high solar steam efficiency of 85.6% under 1 sun illumination (1 kW m-2 ), which is among the best compared with other reported evaporators. The all-in-one structure design using the advanced 3D printing fabrication technique offers a new approach to solar energy harvesting for high-efficiency steam generation.
read more
Chat with Paper
AI Agents for this Paper
Find similar papers on Google Scholar, PubMed and Arxiv
Write a critical review of this paper
Analyze citations of this paper to find unaddressed research gaps
Citations
Solar water recycling of carbonaceous aerogel in open and colsed systems for seawater desalination and wastewater purification
TL;DR: In this paper , a porous hydrophilic/hydrophobic cellulose graphene aerogel (CGA) was used to achieve efficient water recycling in solar-driven desalination and purification of heavy metal wastewater.
63
3D Printed Template-Assisted Assembly of Additive-Free Ti3C2Tx MXene Microlattices with Customized Structures toward High Areal Capacitance.
TL;DR: In this article , additive-free 3D architected MXene aerogels are fabricated via a 3D printed template-assisted method that combines a hollow template and cation-induced gelation process.
62
References
3D self-assembly of aluminium nanoparticles for plasmon-enhanced solar desalination
TL;DR: In this article, a plasmon-enhanced solar desalination device, fabricated by the self-assembly of aluminium nanoparticles into a three-dimensional porous membrane, is demonstrated.
1.9K
Solar steam generation by heat localization
TL;DR: Development of an approach and corresponding material structure for solar steam generation while maintaining low optical concentration and keeping the bulk liquid at low temperature with no vacuum, which provides a novel approach to harvesting solar energy for a broad range of phase-change applications.
Inkjet Printing for Materials and Devices
TL;DR: Inkjet printing has been used as a free-form fabrication method for building three-dimensional parts and is being explored as a way of printing electrical and optical devices, especially where these involve organic components.
1.9K
Bone tissue engineering using 3D printing
TL;DR: This review article focuses on recent advances in 3D printed bone tissue engineering scaffolds along with current challenges and future directions.
1.7K
3D-Printing of Lightweight Cellular Composites
TL;DR: A new epoxy-based ink is reported, which enables 3D printing of lightweight cellular composites with controlled alignment of multiscale, high-aspectratio fiber reinforcement to create hierarchical structures inspired by balsa wood.
1.5K