TL;DR: In this article, a two-stage compression of laser pulses with a power of 250 TW is experimentally realized by broadening their spectrum during self-phase modulation in fused silica and subsequent dispersion compensation upon reflection from chirping mirrors.
Abstract: Two-stage compression of laser pulses with a power of 250 TW is experimentally realised by broadening their spectrum during self-phase modulation in fused silica and subsequent dispersion compensation upon reflection from chirping mirrors. A fivefold decrease in the duration is demonstrated, from 75 to 15 fs, with a B-integral value of about 5 at each stage. It is possible to avoid small-scale self-focusing due to self-filtering of the laser beam during free propagation in vacuum. With optimal parameters of the dispersive mirror, the pulse can be compressed to a duration of less than 5 fs.
TL;DR: The characteristics of current methods for the synthesis of holographic elements are described that implement a given complex impulse response of the optical system and are optimal for using SLMs with purely amplitude, purely phase, and hybrid amplitude – phase modulation.
TL;DR: In this article, a general review of information transmission capacities of quantum communication channels is presented, which is a development of the classical Shannon theory, and the unique role of the quantum entanglement property, which manifests itself, in particular, in a nonclassical phenomenon of capacity superadditivity, is emphasised.
Abstract: A brief general review is presented of the theory of information transmission capacities of quantum communication channels, which is a development of the classical Shannon theory. Unlike a classical communication channel, a quantum channel is characterised by a whole set of different capacities, which depend on the type of transmitted information (classical or quantum) and on additional resources used during transmission. The main characteristics of a quantum channel are considered: classical capacity, capacity assisted by entanglement between the channel input and output, quantum capacity and secret classical capacity. The unique role of the quantum entanglement property, which manifests itself, in particular, in a nonclassical phenomenon of capacity superadditivity, is emphasised.
TL;DR: In this article, the effect of the femtosecond energy and the number of pulses on the microhole geometry (hole diameter, circularity, taper angle, and drilling quality) is evaluated.
Abstract: We present images of microholes drilled in diamond using a homemade femtosecond Yb : KGW laser. We use a femtosecond laser source emitting pulses with a duration of 230 fs at a wavelength of 1030 nm, the focusing spot size amounting to 8.9 μm. The effect of the pulse energy and the number of pulses on the microhole geometry (hole diameter, circularity, taper angle, and drilling quality) is evaluated. The obtained results demonstrate the feasibility of drilling of hourglass-shaped holes in a diamond sample, which have similar diameters at the hole entrance (92 μm) and exit (95 μm), but a much smaller diameter (28 μm) at a certain waist section inside the hole.
TL;DR: An optical encryption scheme with spatially incoherent illumination based on two micromirror light modulators has been experimentally implemented for the first time.
Abstract: An optical encryption scheme with spatially incoherent illumination based on two micromirror light modulators has been experimentally implemented for the first time. Currently, such modulators are the fastest tools for spatio-temporal light modulation; their high frame rates provide possibilities for developing optical encryption systems with a bandwidth of several gigabites per second.
TL;DR: In this paper, the relationship between LSHB and other mechanisms capable of reducing the output power of high-power semiconductor lasers is examined by numerically solving one-dimensional (1D) rate equations.
Abstract: Longitudinal spatial hole burning (LSHB) in high-power semiconductor lasers is analysed by numerically solving one-dimensional (1D) rate equations. Calculations are performed for GaAsbased lasers operating at a wavelength of 1.06 μm. It is shown that the LSHB-induced decrease in output power can be accounted for by two mechanisms: build-up of spontaneous recombination and decrease in slope efficiency, equivalent to a rise in internal optical loss. We analyse the influence of different laser chip parameters on the magnitude of the LSHB effect. In particular, it is shown that to suppress LSHB it is preferable to increase the optical confinement factor Γ. We examine the relationship between LSHB and other mechanisms capable of reducing the output power.
TL;DR: In this paper, the aluminophosphate glass samples differing in bismuth oxide content and demonstrating broadband near-IR photoluminescence were analyzed and it was concluded that they contain two main types of emission centres, one of which seems to be a Bismuth monocation and the other is a cluster ion.
Abstract: We have prepared aluminophosphate glass samples differing in bismuth oxide content and demonstrating broadband near-IR photoluminescence. Analysis of their photoluminescence spectra leads us to conclude that they contain two main types of emission centres, one of which seems to be a bismuth monocation and the other is a cluster ion. In addition to these luminescence centres, the aluminophosphate glasses contain a nonluminescent bismuth-containing centre responsible for the broad, strong optical absorption band peaking at 450 nm.
TL;DR: In this paper, a laser system was developed with an optical synchronisation of a femtosecond signal with a pump channel, where the signal of a driving ytterbium fiber laser with a 60 MHz repetition rate of stretched femtocond pulses was amplified in energy from several nanojoules to 0.4 mJ at a pulse repetition rate in a wideband amplifier and then is compressed in time to 250 fs.
Abstract: A laser system is developed with an optical synchronisation of a femtosecond signal with a pump channel. The signal of a driving ytterbium fibre laser with a 60 MHz repetition rate of stretched femtosecond pulses is amplified in energy from several nanojoules to 0.4 mJ at a pulse repetition rate of 3 kHz in a wideband amplifier and then is compressed in time to 250 fs. The obtained radiation is used for generating femtosecond laser pulses with a centre wavelength of ≈2 μm, pulse energy of above 20 μJ, duration of several field oscillations, and phase stabilisation between the electromagnetic field and envelope. The other pulse of the driving fibre laser provides optical synchronisation and a minimal time delay and is directed to a regenerative Yb : YAG disk amplifier for amplification to an energy of 4 mJ at a pulse repetition rate of 3 kHz and duration of 20 ps. A multipass disk amplifier is developed for further increasing the energy of pump chirped pulses to an energy of 70 mJ at a pulse repetition rate of 10 Hz and duration of 400 ps for studying parametric amplification under sub-nanosecond pumping.
TL;DR: Electrochemical etching, which results in the formation of layers of porous silicon, allows the yield of ablation products to be increased several-fold by lowering the ablation threshold, thereby increasing the light scattering efficiency of the prepared suspensions compared with the case of using crystalline silicon as targets.
TL;DR: In this paper, the predictive properties of methods aimed for estimating the water content in skin from the spectral diffuse reflection characteristics near the water absorption line in the near-IR spectral range are analyzed.
Abstract: The predictive properties of methods aimed for estimating the water content in skin from the spectral diffuse reflection characteristics near the water absorption line in the near-IR spectral range are analysed. Numerical simulation data, experimental data on diffuse reflection from human skin phantoms, and data from the reference data set of human skin reflectance spectra are used to consider the possibility of gaining additional information about the water distribution in skin. The influence of variations in the scattering coefficient and oxyhaemoglobin concentration on the water content estimates is investigated.
TL;DR: In this article, the authors demonstrate the operation of an imaging transmission-grating spectrograph with a broadband Mo/Be multilayer mirror with a uniform reflectivity in the wavelength range 111-138 A synthesised at the Institute for the Physics of Microstructures, RAS.
Abstract: A family of aperiodic Mo/Be multilayer mirrors was designed for maximum uniform reflectivity in the ranges 111–138, 111–150, 111–200 and 111–222 A at normal radiation incidence. The simulations took into account the existence of Mo-on-Be and Be-on-Mo transition layers. It was shown that the reflectivity may be as high as 10% in an octave wavelength range of 111–222 A. We demonstrate the operation of an imaging transmission-grating spectrograph with a broadband Mo/Be multilayer mirror with a uniform reflectivity in the wavelength range 111–138 A synthesised at the Institute for the Physics of Microstructures, RAS. The spectrograph was used to record the line spectra of multiply charged fluorine and magnesium ions from a laser-produced plasma. The role of the grating support structure in the formation of spectral source images is discussed. The spatial resolution of 50 μm is demonstrated.