Abstract: Natural polymers such as collagens, elastin, and fibrinogen make up much of the body’s native extracellular matrix (ECM). This ECM provides structure and mechanical integrity to tissues, as well as communicating with the cellular components it supports to help facilitate and regulate daily cellular processes and wound healing. An ideal tissue engineering scaffold would not only replicate the structure of this ECM, but would also replicate the many functions that the ECM performs. In the past decade, the process of electrospinning has proven effective in creating non-woven ECM analogue scaffolds of micro to nanoscale diameter fibers from an array of synthetic and natural polymers. The ability of this fabrication technique to utilize the aforementioned natural polymers to create tissue engineering scaffolds has yielded promising results, both in vitro and in vivo , due in part to the enhanced bioactivity afforded by materials normally found within the human body. This review will present the process of electrospinning and describe the use of natural polymers in the creation of bioactive ECM analogues in tissue engineering.

Abstract: Poly(ester amide)s are an emerging group of biodegradable polymers that may cover both commodity and speciality applications. These polymers have ester and amide groups on their chemical structure which are of a degradable character and provide good thermal and mechanical properties. In this sense, the strong hydrogen‑bonding interactions between amide groups may counter some typical weaknesses of aliphatic polyesters like for example poly(e-caprolactone). Poly(ester amide)s can be prepared from different monomers and following different synthetic methodologies which lead to polymers with random, blocky and ordered microstructures. Properties like hydrophilic/hydrophobic ratio and biodegradability can easily be tuned. During the last decade a great effort has been made to get functionalized poly(ester amide)s by incorporation of a-amino acids with hydroxyl, carboxyl and amine pendant groups and also by incorporation of carbon-carbon double bonds in both the polymer main chain and the side groups. Specific applications of these materials in the biomedical field are just being developed and are reviewed in this work (e.g., controlled drug delivery systems, hydrogels, tissue engineering and other uses like adhesives and smart materials) together with the main families of functionalized poly(ester amide)s that have been developed to date.

Abstract: The article is focused on analyzing the effect of functionalization and reactive processing on the morphological, thermal, rheological and mechanical properties of composites of isotactic polypropylene (PP), polystyrene (PS), poly(ethylene-vinyl acetate) (EVA), with cellulose fibers, hemp or oat as natural fillers. Both polymers and fibers were modified with bi-functional monomers (glycidyl methacrylate, GMA; maleic anhydride, MA) capable of facilitating chemical reactions between the components during melt mixing. Polyolefin copolymers containing reactive groups (PP-g-GMA, SEBS-g-MA, PS-co-MA, etc.) were used as compatibilizers. Optical and SEM microscopy, FTIR, RX, DSC, TGA, DMTA, rheological and mechanical tests were employed for the composites characterization. The properties of binary and ternary systems have been analyzed as a function of both fiber and compatibilizer content. All compatibilized systems showed enhanced fiber dispersion and interfacial adhesion. The phase behavior and the thermal stability of the composites were affected by the chemical modification of the fibers. Marked changes in the overall crystallization processes and crystal morphology of PP composites were observed owing to the nucleating effect of the fibers. The tensile mechanical behavior of the compatibilized composites generally resulted in a higher stiffness, depending on the fiber amount and the structure and concentration of compatibilizer.

Abstract: Shape memory polymers (SMP) belong to the class of stimuli-responsive materials and have generated significant research interest. Their capability to retain an imposed, temporary shape and to recover the initial, permanent shape upon exposure to an external stimulus depends on the "functional determinants", which in simplistic terms, can be divided into structural/morphological and processing/environmental factors. The primary aim of the first part of this review is to reflect the knowledge about these fundamental relationships. In a next step, recent advances in shape memory polymer composites are summarized. In contrast to earlier reviews, studies on the impairment of shape memory properties through various factors, such as aging, compression and hibernation, lubricants, UV light and thermo-mechanical cycling, are extensively reviewed. Apart from summarizing the state-of-the-art in SMP research, recent progress is commented.

Abstract: This review outlines the responsive polymer methods currently in use with their potential application to plant protection and puts forward plant-specific mechanisms as stimuli in newly devised methods for smart release of crop protection agents (CPAs). CPAs include chemicals (fungicides, insecticides, herbicides), biochemicals (antibiotics, RNA-based vaccines for plant viruses), semiochemicals (pheromones, repellents, allomones), microbial pesticides, growth regulators (insect and plant) or micronutrients, all with crop protection effects. This appraisal focuses on emerging uses of polymer nano-encapsulated CPAs. Firstly, the most interesting advances in controlled release methods are critically discussed with their advantages and drawbacks. Secondly, several plant-specific stimuli-based smart methods are anticipated for use alongside the polymer nano- or micro-capsules. These new CPA release methods are designed to (i) protect plants against infection produced by fungi or bacteria, and (ii) apply micro-nutrients when the plants need it the most. Thus, we foresee (i) the responsive release of nano- encapsulated bio-insecticides regulated by plant stress enzymes, and (ii) the delivery of micro-nutrients synchronized by the nature or intensity of plant root exudates. Such continued advances of nano-scale smart polymer-based CPAs for the protection of crops herald a “small revolution” for the benefit of sustainable agriculture.

Abstract: Nowadays, the utilization of raw materials derived from renewable feedstock is in the spotlight of the chemical industry, as vegetable oils are one of the most important platform chemicals due to their universal availability, inherent biodegradability and low price. Taking into account that polyurethanes are one of the most important industrial products exhibiting versatile properties suitable for use in many fields, our research is focused on exploiting fatty acids in the preparation of biobased polyols and polyurethanes. This review is organized as a function of the nature of the final polyurethane systems; hence we describe the preparation of linear thermoplastic and crosslinked polyurethanes derived from oleic and undecylenic acids-based diols and polyols, respectively.

Abstract: Many carbohydrates pose advantages for tissue engineering applications due to their hydrophilicity, degradability, and availability of chemical groups for modification. For example, carboxymethylcellulose (CMC) is a water-soluble cellulose derivative that is degradable by cellulase. Though this enzyme is not synthesized by mammalian cells, cellulase and the fragments derived from CMC degradation are biocompatible. With this in mind, we created biocompatible, selectively degradable CMC-based hydrogels that are stable in routine culture, but degrade when exposed to exogenous cellulase. Solutions of CMC-methacrylate and polyethylene glycol dimethacrylate (PEG-DM) were co-crosslinked to form stable hydrogels; we found that greater CMC-methacrylate content resulted in increased gel swelling, protein diffusion and rates of degradation by cellulase, as well as decreased gel shear modulus. CMC-methacrylate/PEG-DM gels modified with the adhesive peptide RGD supported fibroblast adhesion and viability. We conclude that hydrogels based on CMC-methacrylate are suitable for bioengineering applications where selective degradability may be favorable, such as cell scaffolds or controlled release devices.

Abstract: Glucan particles (GPs) are 2–4 mm spherical, hollow, porous shells extracted from Baker’s yeast, Saccharomyces cerevisae. The surface of the GPs is composed primarily of 1,3-b-glucan and the particles are efficiently phagocytosed via receptor-mediated cell uptake by macrophages, phagocytic cells expressing glucan receptors. The hollow cavity of the GPs allows for efficient absorption and encapsulation of payload molecules. Rifampicin (Rif), a drug used in tuberculosis treatment, was encapsulated by precipitation in GPs and trapped using a calcium alginate or chitosan hydrogel to seal the pores of GPs and slow Rif release. Unplugged GP formulations immediately released Rif following particle resuspension in aqueous buffer. Alginate and chitosan sealing of GPs loaded with Rif was able to extend drug release for 24–72 h. GP-Rif formulations containing 10% w/w Rif/GP plugged with a calcium alginate hydrogel were effective at reducing colony forming units of M. tuberculosis strain mc26020 in infected bone marrow macrophages ~80–90% at 24 and 72 hours. The amount of Rif delivered in the GP formulations was below the free Rif minimal inhibitory concentration demonstrating that GP targeted Rif delivery to macrophages enhances Rif antimicrobial effects.

Abstract: The solution behavior of a series of poly(2-oxazoline)s with different side chains, namely methyl, ethyl, n-propyl, isopropyl, n-butyl, isobutyl, pentyl, hexyl, heptyl, octyl, nonyl, phenyl and benzyl, are reported in ethanol-water solvent mixtures based on turbidimetry investigations. The LCST transitions of poly(2-oxazoline)s with propyl side chains and the UCST transitions of the poly(2-oxazoline)s with more hydrophobic side chains are discussed in relation to the ethanol-water solvent composition and structure. The poly(2-alkyl-2-oxazoline)s with side chains longer than propyl only dissolved during the first heating run, which is discussed and correlated to the melting transition of the polymers.

Abstract: Polyaniline is known to be a true metal, though a nanometal. Previous experimental and theoretical evidence is reviewed. Two important structural features are presented, which have not publicly been discussed so far: (a) The formation of complexes between polyaniline and metals (Cu, Fe, Zn, In, etc.) which are crucial for most practical applications of the organic metal, polyaniline; and (b) a model for the polyaniline chain structure within the smallest morphological unit, the roughly 10 nm primary particle.

Abstract: Oxidative degradation of commercial grade ABS (Acrylonitrile-butadiene-styrene) resin powders was studied by thermal analysis. The instabilities of ABS containing different polybutadiene (PB) contents with respect to temperature were studied by Differential Scanning Calorimeter (DSC). Thermograms of isothermal test and dynamic scanning were performed. Three exothermic peaks were observed and related to auto-oxidation, degradation and oxidative decomposition, respectively. Onset temperature of the auto-oxidation was determined to be around 193 °C. However, threshold temperature of oxidation was found to be as low as 140 °C by DSC isothermal testing. Another scan of the powder after degeneration in air showed an onset temperature of 127 °C. Reactive hazards of ABS powders were verified to be the exothermic oxidation of unsaturated PB domains, not the SAN (poly(styrene-acrylonitrile)) matrix. Heat of oxidation was first determined to be 2,800 ± 40 J per gram of ABS or 4,720 ± 20 J per gram of PB. Thermal hazards of processing ABS powder are assessed by adiabatic temperature rise at process conditions. IR spectroscopy associated with heat of oxidation verified the oxidative mechanism, and these evidences excluded the heat source from the degradation of SAN. A specially prepared powder of ABS without adding anti-oxidant was analyzed by DSC for comparing the exothermic behaviors. Exothermic onset temperatures were determined to be 120 °C and 80 °C by dynamic scanning and isothermal test, respectively. The assessment successfully explained fires and explosions in an ABS powder dryer and an ABS extruder.

Abstract: Shape memory nanocomposites of polyurethane (PU)-clay were fabricated by melt mixing of PU and nano-clay. Based on nano-indentation and microhardness tests, the strength of the nanocomposites increased dramatically as a function of clay content, which is attributed to the enhanced nanoclay-polymer interactions. Thermal mechanical experiments demonstrated good mechanical and shape memory effects of the nanocomposites. Full shape memory recovery was displayed by both the pure PU and PU-clay nanocomposites.

Abstract: Conductive plastics are attracting more and more interest in electronics due to their light weight and inability to rust, which are common problems associated with metals. The field of conducting plastics is not new. Much work has been done to impart electrical conductivity to mechanically strong polymers such as polypropylene, polycarbonate and epoxies, etc. However there is a need to fabricate more flexible and elastic conductive polymers such as conducting silicone rubbers for use in various applications. In this work silicone rubbers reinforced with conductive fillers have been fabricated for use as sensors in textiles to detect the resistance change produced by stretching or relaxing. The variations of electrical resistance have been investigated by stretching and releasing the strands of conductive rubbers as a function of time. Two types of silicone rubbers—addition cured and condensation cured—were compounded with different electrically conductive fillers, among which carbon fibers have shown the best results. The carbon fibers improved the electrical conductance of the rubbers, even in very low weight percentages. The increasing concentration of fillers decreases the elasticity of the rubber. In order to keep the original properties of silicones, the filler concentration was kept as low as possible to produce a significantly detectable signal. The fabricated compounds were analyzed for their mechanical properties by stress strain curves. Such materials find their applications in electronics, antistatic applications, sports and the automotive industry where they can be used as deformation sensors.

Abstract: An ideal scaffold material is one that closely mimics the natural environment in the tissue-specific extracellular matrix (ECM). Therefore, we have applied hyaluronic acid (HA), which is a main component of the cartilage ECM, to chitosan as a fundamental material for cartilage regeneration. To mimic the structural environment of cartilage ECM, the fundamental structure of a scaffold should be a three-dimensional (3D) system with adequate mechanical strength. We structurally developed novel polymer chitosan-based HA hybrid fibers as a biomaterial to easily fabricate 3D scaffolds. This review presents the potential of a 3D fabricated scaffold based on these novel hybrid polymer fibers for cartilage tissue engineering.

Abstract: We fabricated titanium dioxide (TiO2)-silica (SiO2) nanocomposite structures with controlled morphology by a simple synthetic approach using cooperative sol-gel chemistry and block copolymer (BCP) self-assembly. Mixed TiO2-SiO2 sol-gel precursors were blended with amphiphilic poly(styrene-block-ethylene oxide) (PS-b-PEO) BCPs where the precursors were selectively incorporated into the hydrophilic PEO domains. Changing the volumetric ratio of TiO2-SiO2 sol-gel precursor from 5% to 20%, a stepwise structural inversion occurred from nanodot arrays to discrete nanowires. Template free hybrid inorganic nanostructures were produced after the removal of PS-b-PEO by irradiation of UV light. The morphological evolution and photophysical properties were investigated by microscopic studies, UV-visible absorption and photocatalytic properties.

Abstract: In this paper, the behavior of oxidized methylcelluloses is compared with that of the initial methylcellulose, an amphiphilic cellulose derivative. Methylcelluloses are important for many applications in the cosmetic and food industries. The mechanism of thermo-gelation of methylcellulose is briefly explained as well as the method of oxidation of polysaccharides. Then, our experiments involve the preparation of oxidized methylcelluloses: three degrees of oxidation are prepared and the new polymers are characterized by NMR, IR, SEC and rheology. Oxidation with periodate theoretically allows introduction of two aldehydic groups on C2-C3 glycol positions of anhydroglucose units. This reaction not only enhances the flexibility of the cellulosic backbone, but also causes a decrease in the molecular weight. In particular, the rheological behavior of methylcellulose and oxidized methylcellulose as a function of temperature is examined. The oxidized methylcelluloses prepared, being rich in aldehyde functions, become interesting intermediaries to prepare new cellulose derivatives. In this paper, three examples of reductive amination based on the reaction of modified methylcelluloses and −NH2 groups of different molecules are described: -alanine produces a polyelectrolyte; chitosan and hyaluronan-ADH (derivative obtained with adipic dihydrazide allowing introduction of −NH2 functions on HA backbone) are crosslinked and give new biocompatible hydrogels.

Abstract: A new series of conjugated carbazole polymers based on the 1,8-carbazolylene unit was synthesized by the Pd-catalyzed polycondensation between the 1,8-diiodocarbazole derivative and various bifunctional counter comonomers. An alkyne spacer was found to be a key to increasing the molecular weight of the resulting polymers. All the obtained polymers showed good solubilities in the common organic solvents, and they were fully characterized by Gel permeation chromatography (GPC), and 1H NMR and infrared (IR) spectroscopies. The UV-vis absorption and fluorescence spectra revealed the relationship between the chemical structure and effective conjugation length. The efficiency order of the carbazole connectivity was 2,7-carbazolylene > 1,8-carbazolylene > 3,6-carbazolylene. The electrochemical properties of these polymers suggested the relatively facile oxidation at ca. +0.5–0.7 V vs. Fc/Fc+ or a high potential as p-type semiconductors. The combination of the electrochemical oxidation potentials and the optical band gaps allowed us to estimate the HOMO and LUMO levels of the polymers. It was shown that the energy levels of the 1,8-carbazole-based conjugated polymers can be tunable by selecting the appropriate comonomer structures.

Abstract: Biological liquid crystalline polymers are found in cellulosic, chitin, and DNA based natural materials. Chiral nematic liquid crystalline orientational order is observed frozen-in in the solid state in plant cell walls and is known as a liquid crystal analogue characterized by a helicoidal plywood architecture. The emergence of the plywood architecture by directed chiral nematic liquid crystalline self assembly has been postulated as the mechanism that leads to optimal cellulose fibril organization. In natural systems, tissue growth and development takes place in the presence of inclusions and secondary phases leaving behind characteristic defects and textures, which provide a unique testing ground for the validity of the liquid crystal self-assembly postulate. In this work, a mathematical model, based on the Landau-de Gennes theory of liquid crystals, is used to simulate defect textures arising in the domain of self assembly, due to presence of secondary phases representing plant cells, lumens and pit canals. It is shown that the obtained defect patterns observed in some plant cell walls are those expected from a truly liquid crystalline phase. The analysis reveals the nature and magnitude of the viscoelastic material parameters that lead to observed patterns in plant-based helicoids through directed self-assembly. In addition, the results provide new guidance to develop biomimetic plywoods for structural and functional applications.

Abstract: Procedures for the treatment of retinal detachment and related conditions have been successfully improved upon in recent years thanks to the advent of new therapies and biomaterials. This review, after giving an overview on eye structure and function, focuses on the treatment of retinal detachment and examines the role and features of the materials used in vitreoretinal surgery, emphasizing scleral buckling and short-term/long-term vitreous tamponade. Specifically, the limitations of existing biomaterials are underlined, based on experimental studies and with particular reference to cells/material interactions. Finally, current and future trends of biomaterials' research in the field of vitreoretinal surgery are considered and discussed.

Abstract: A series of segmented multiblock copolymers containing aramid hard segments and extended polycaprolactone soft segments (with an Mn of 4,200 or 8,200 g mol–1) was prepared and tested for their shape-memory properties. Chain extenders were essential to raise the hard segment concentration so that an extended rubbery plateau could be observed. Dynamic mechanical thermal analysis provided a useful guide in identifying (i) the presence of a rubbery plateau, (ii) the flow temperature, and (iii) the temperature when samples started to deform irreversibly.

Abstract: New polymers were synthesized from α-hydroxy acids derived from the natural amino acids Ile, Leu, Phe, and Val, combined with lactic acid, glycolic acid and 6-hydroxyhexanoic acid by direct condensation. The toxicity was determined and the degradation process of these polyesters was investigated under physiological conditions by analyzing the composition of the degraded polymers and the oligomers cleaved in the buffer medium. The polymers were found to be non toxic to two cell lines. Polymers displayed a biphasic degradation behavior. In most cases, a linear relationship was found between the weight loss constant and the hydrophobicity of the polymers, Log P. Regarding the second stage of weight loss, it is apparent that polymers derived from α-hydroxy(L)isoleucine ((L)HOIle) and α-hydroxy(L)Valine ((L)HOVal) degraded much faster than those derived from α-hydroxy(L)leucine ((L)HOLeu) and α-hydroxy(L)phenylalanine ((L)HOPhe), probably due to different spatial orientation of the side chains. Copolymers of 6-hydroxyhexanoic acid displayed slow degradation rates as expected, whereas the degradation profile of copolymers of lactic acid was similar to the other homopolymers. These new polyesters may serve as potential biocompatible materials for medical applications.

Abstract: Medical polyurethanes have shown good bio-stability and mechanical properties and have been used as coating for implantable medical devices. However, despite their excellent properties, they are relatively permeable to liquid water and water vapour which is a drawback for electronic implant encapsulation. In this study polyether polyurethanes with different soft segment molecular weights were modified by incorporating isopropyl myristate (IPM), as a hydrophobic modifying agent, and the effect of IPM on water resistant and biocompatibility of membranes were investigated. IPM changed the surface properties of the polyurethane film and reduced its surface energy. Polyurethane films were found to be stable with IPM concentrations of 1–5 wt% based upon their chemistry; however it leached out in BSA at higher concentrations. Though, low concentrations of IPM reduced both liquid water and water vapour permeability; at higher IPM content liquid permeability did not improved significantly. In general, the polyurethane materials showed much lower water permeability compared with currently used silicone packaging material for electronic implants. In addition, cytotoxicity assessment of IPM containing polyurethanes showed no evidence of cytotoxcity up to 5 wt% IPM.

Abstract: For over a decade our group has been designing, preparing and evaluating bioactive, remineralizing composites based on amorphous calcium phosphate (ACP) fillers embedded in polymerized methacrylate resin matrices. In these studies a major focus has been on exploring structure-property relationships of the matrix phase of these composites on their anti-cariogenic potential. The main challenges were to gain a better understanding of polymer matrix/filler interfacial properties through controlling the surface properties of the fillers or through fine-tuning of the resin matrix. In this work, we describe the effect of chemical structure and composition of the resin matrices on some of the critical physicochemical properties of the copolymers and their ACP composites. Such structure-property studies are essential in formulating clinically effective products, and this knowledge base is likely to have strong impact on the future design of therapeutic materials, appropriate for mineral restoration in defective tooth structures.

Abstract: The abiotic origin of genetic polymers faces two major problems: a prebiotically plausible polymerization mechanism and the maintenance of their polymerized state outside a cellular environment. The stabilizing action of borate on ribose having been reported, we have explored the possibility that borate minerals stabilize RNA. We observe that borate itself does not stabilize RNA. The analysis of a large panel of minerals tested in various physical-chemical conditions shows that in general no protection on RNA backbone is exerted, with the interesting exception of ludwigite (Mg2Fe3+BO5). Stability is a fundamental property of nucleic polymers and borate is an abundant component of the planet, hence the prebiotic interest of this analysis.

Abstract: Previous studies of tri-n-butylborane–initiated graft copolymerization of methyl methacrylates with hydrated proteinous materials and proteins have focused on the number of grafted-poly (MMA) branches as well as the percent graft and graft efficiency. The number of branches in silk fibroin is 1.3, whereas the number in collagen, gelatin, ovalbumin and wool are 0.1, 0.04, 0.02 and 0.03, respectively. The number of grafted-PMMA branches in synthetic poly-L-peptides is approximately 10-fold less than that in gelatin, and decline, in the order poly-Ala > poly-Ser > poly-Pro > poly-Glu > poly-Lys. By contrast, poly-Gly, poly-Tyr and poly-Leu have no branches. The co-catalytic effect (the ratio of the number of polymer formed relative to that of control) of amino acids on tri-n-butylborane-initiated polymerization of MMA in the presence of water has been linearly correlated with their ionization potential (IPkoopman); |Aa HOMO (Highest Occupied Molecular Orbital)| (r2 = 0.6, outliers: Cys and His); Aa HOMO = [aHOMOaqua − aHOMOvacuum] calculated using the semiempirical AM1 method. Also, a significant exponential relationship between the number of branches of poly-L-polypeptides and the Aa HOMO of the corresponding amino acids has been observed (r2 = 0.9). A possible grafting site of protein (polypeptide) is discussed.

Abstract: Novel propargyl-ended heterobifunctional poly(ethylene glycol) (PEG) derivatives with hydroxyl, carboxyl, mercapto or hydrazide end groups were synthesized with simplicity yet high efficiency. PEG (Mw = 3500 Da) with an α-hydroxyl group and an ω-carboxyl was used as the starting polymer. The carboxyl group of the bifunctional PEG was modified into a propargyl, then carboxyl, mercapto or hydrazide groups were introduced to the other end of the bifunctional PEG by modifying the bifunctional PEG’s hydroxyl group with succinic anhydride, cysteamide or tert-butyl carbazate, respectively. This method can be useful to the development of PEG-based bioconjugates for a variety of biomedical applications.

Abstract: The physicochemical properties of stimuli-responsive polymers change with physical or biological signals, such as pH, enzyme concentrations, and temperature. These polymers have attracted considerable attention in the field of drug delivery. The drug carrier system, which was revolutionized by the introduction of these polymers, has recently provided a new paradigm of maximizing the therapeutic activity of drugs. This review highlights recent studies regarding stimuli-responsive drug carriers tailor-made for effective cytosolic drug delivery, with particular emphasis on tumor treatment.

Abstract: Statins, a group of potent inhibitors of 3-hydroxy-3-methylglutaryl Coenzyme A reductase in cholesterol biosynthesis pathway, have been widely used as a cholesterol lowering drug. The plieotrophic effect of statins on bone metabolism in long-term usage has been begun to be studied during recent years and several in vitro and in vivo studies have demonstrated the ability of statins to promote expression of bone morphogenetic protein-2 (BMP-2), inhibition of osteoclast differentiation and reduction of osteoporotic fractures risk. The high liver specificity and low oral bioavailability of statins, leading to poor peripheral distribution, are the main obstacles to benefit anabolic effects of hydrophobic statins on bone formation. Therefore, developing new administration roots for direct delivery to achieve optimum concentration in the bone microenvironment is of interest. Here we present and compare two approaches of combining statins with bone tissue engineering scaffolds. Simvastatin was combined with a poly(lactide-co-glycolide) (PLGA) membrane scaffold for diffusion-controlled release by dissolving simvastatin (dis-sim) in the membrane casting dope, and for degradation-controlled release by covalently bonding saponifiedsimvastatin (sap-sim) to the PLGA in the spinning dope. Rheological and concentration-dependent membrane morphology changes were observed with saponifiedsimvastatin, suggesting ester bond cleavage and covalent bonding of the statin to the PLGA, but not with dissolved simvastatin. Dissolved simvastatin membranes showed a logarithmic decay release profile while the saponifiedsimvastatin membranes showed constant release. It can be concluded that the covalent bonding of simvastatinto PLGA scaffolds is showing potential for use as a controlled releasescaffold for bone tissue engineering.

Abstract: Block copolymers forming glassy spheres in the matrix of rubbery chains can exhibit elastomeric properties. It is well known that the spherical microdomains are arranged in the body-center cubic (bcc) lattice. However, recently, we have found packing in the face-centered cubic (fcc) lattice, which is easily transformed into the bcc lattice upon uniaxial stretching. In the same time, the packing regularity of the spheres in the bcc lattice was found to be enhanced for samples completely recovered from the stretched state. This reminds us that a cycle of stretching-and-releasing plays an important role from analogy of densification of the packing in granules upon shaking. In the current paper, we quantify the enhancement of packing regularity of spherical microdomains in the bcc lattice upon uniaxial stretching of the same elastomeric triblock copolymer as used in our previous work by conducting small-angle X-ray scattering (SAXS) measurements using high brilliant synchrotron radiation. Isotropically circular rings of the lattice peaks observed for the unstretched sample turned into deformed ellipsoidal rings upon the uniaxial stretching, with sharpening of the peaks in the direction parallel to the stretching direction and almost disappearing of the peaks in the perpendicular direction. By quantitatively analyzing the SAXS results, it was found that the packing regularity of the spherical microdomains was enhanced in the parallel direction while it was spoiled in the perpendicular direction under the stretched state. The enhanced regularity of packing was unchanged even if the stretching load was completely removed.