Abstract: Mechanical and morphological studies of aligned nanofibrous meshes of poly(e-caprolactone) (PCL) fabricated by electrospinning at different collector rotation speeds (0, 3000 and 6000 rpm) for application as bone tissue scaffolds are reported. SEM, XRD and DSC analyses were used for the morphological characterization of the nanofibers. Scaffolds have a nanofibrous morphology with fibers (majority) having a diameter in the range of 550–350 nm (depending on fiber uptake rates) and an interconnected pore structure. With the increase of collector rotation speed, the nanofibers become more aligned and oriented perpendicular to the axis of rotation. Deposition of fibers at higher fiber collection speeds has a profound effect on the morphology and mechanical properties of individual fibers and also the bulk fibrous meshes. Nanoindentation was used for the measurement of nanoscopic mechanical properties of individual fibers of the scaffolds. The hardness and Young's modulus of aligned fibers measured by nanoinden...

Abstract: The inflammatory and fibrous responses in a subcutaneous rat model were evaluated around degradable polyurethane urea (PUUR; Artelon), with titanium and tissue culture polystyrene (PS) discs having different surface chemical properties but similar surface topography. Cytokines, viability, cellular response, differentiation of cells and fibrous capsule formation and vascularization was investigated after 1, 7 and 21 days of implantation. The exudates retrieved from the pockets were analysed with respect to the total cell numbers, the proportions of cell types, the differentiation of monocytes/macrophages (ED1, ED2), the DNA content and the viability (LD, Trypan blue). Tumour necrosis factor alpha ((h)TNF-alpha) and interleukin-10 ((h)IL-10) were quantified by ELISA. The number of blood vessels, blood vessel luminal area, blood vessel distribution and the fibrous capsule thickness were analysed. The highest number of cells in the exudates around all implants was detected during the early phase of healing (1-7 days). The proportion of ED2-positive cells in the exudates increased from 2-8% at 1 day to 43-56% at 21 days. The levels of TNF-alpha were low with a decrease at 7 days. After 21 days high amounts of IL-10 in the exudates were detected, in particular around PUUR. This study shows that the transition from inflammation to repair (1-21 days) around PUUR, Ti and PS materials was characterized by a decrease in inflammatory cell influx, an increasing proportion of ED2-expressing macrophages, a biphasic TNF-alpha secretion, an increase of IL-10 and a fibrous capsule formation similar to all materials tested.

Abstract: Desaminotyrosyl-tyrosine ethyl ester (DTE) and desaminotyrosyl-tyrosine (DT) were used as monomers in the synthesis of two tyrosine-derived polycarbonates: the slow degrading homopolymer poly(DTE carbonate) and the fast degrading co-polymer poly(DTE-co-20%DT carbonate). Ultrafine fibers of these polymers were successfully fabricated using an electrospinning process. The effects of some solution and process parameters (i.e., polymer concentration, electrostatic field strength and solvent system) on morphological appearance and diameters of the obtained fibers were investigated by scanning electron microscopy (SEM). Smooth fibers were obtained at high enough solution concentrations (i.e., 15 and 20% (w/v)). The average fiber diameter was found to increase with increasing polymer concentration and applied electrostatic field strength. The electrospinnability of poly(DTE-co-20%DT carbonate) in dichloromethane was enhanced when methanol was used as the co-solvent. In all of the conditions investigated, the average diameter of the obtained smooth fibers ranged between 1.9 and 5.8 microm. A qualitative assessment of an as-spun mat of poly(DTE carbonate) fibers as a tissue scaffolding material showed that three different cultured cell lines appeared to adhere and propagate well within the scaffold. For poly(DTE carbonate) exceptionally high cell densities could be achieved after 10 days of cell culture.

Abstract: Nanotechnology has made great strides forward in the creation of new surfaces, new materials and new forms which also find application in the biomedical field. Traditional biomedical applications started benefiting from the use nanotechnology in an array of areas, such as biosensors, tissue engineering, controlled release systems, intelligent systems and nanocomposites used in implant design. In this manuscript a review of developments in these areas will be provided along with some applications from our laboratories.

Abstract: Two types of scaffolds were developed for tissue engineering of the aortic valve; an electrospun valvular scaffold and a knitted valvular scaffold. These scaffolds were compared in a physiologic flow system and in a tissue-engineering process. In fibrin gel enclosed human myofibroblasts were seeded onto both types of scaffolds and cultured for 23 days under continuous medium perfusion. Tissue formation was evaluated by confocal laser scanning microscopy, histology and DNA quantification. Collagen formation was quantified by a hydroxyproline assay. When subjected to physiologic flow, the spun scaffold tore within 6 h, whereas the knitted scaffold remained intact. Cells proliferated well on both types of scaffolds, although the cellular penetration into the spun scaffold was poor. Collagen production, normalized to DNA content, was not significantly different for the two types of scaffolds, but seeding efficiency was higher for the spun scaffold, because it acted as a cell impermeable filter. The knitted tissue constructs showed complete cellular in-growth into the pores. An optimal scaffold seems to be a combination of the strength of the knitted structure and the cell-filtering ability of the spun structure.

Abstract: The electrospinning of hexanoyl chitosan (H-chitosan), polylactide (PLA) and their blends was performed using chloroform, dichloromethane or tetrahydrofuran as a spinning solvent. The as-spun PLA fibers appeared to be cross-sectionally round, with rough surface morphology, while the as-spun H-chitosan fibers were flat with smooth surface morphology. Electrospinning of the H-chitosan/PLA blend solutions in chloroform with the H-chitosan solution content of less than or equal to 50% (w/w) produced continuous fibers without the presence of beads, while that of the blend solutions in dichloromethane produced beaded fibers or even just beads at high H-chitosan solution contents. The size of the as-spun fibers from blend solutions with a H-chitosan solution content of less than or equal to 50% (w/w) was found to decrease with increasing the H-chitosan solution content. Thermal characteristics and crystalline structure of selected as-spun fibers from pure and blend solutions in chloroform were characterized by thermogravimetric analysis, differential scanning calorimetry and wide-angle X-ray diffraction (WAXD) techniques.

Abstract: Samples of polyhydroxybutyrate (PHB), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) containing 4–20% (mol/mol) 3-hydroxyhexanoate (3HHx) were characterized as potential components of blood-contact biomaterials. In an erythrocyte contact hemolysis assay, all tested PHBHHx films had substantially reduced reactivity, typically displaying about 2-fold less hemolytic activity compared with that of PHBV. Both 12% and 20% containing PHBHHx also bound less platelets than other films. After a 120-min exposure to platelet-rich plasma (PRP), few platelets adhered to the 12% and 20% containing PHBHHx films, while numerous platelets were seen on PHBV. Surface properties investigation suggested along with increasing 3HHx content, PHBHHx co-polymer films became smoother and smoother, which may contribute to lower platelet adhesion of PHBHHx containing high HHx content in a short-term contact to platelet-rich plasma. In a long-term contact to PRP, the diffe...

Abstract: The implantation of biomaterials, medical devices or prostheses can instigate a rejection response or initiate an undesirable adsorption of plasma proteins, as well as blood cells on the implant surface, thus triggering diverse defense mechanisms against the supposed pathologic invader. The extent of this inflammatory reaction depends in part on the biocompatibility of the used materials or coatings. Although adsorption and coagulation responses can appear during the total in vivo lifetime of the implant, they are initially and crucially formed within the first 2-4 weeks of implantation. This early phase is of decisive importance for the consecutive in-growth and healing process. The present study was intended to elucidate the effects of blood contact to surfaces modified with reactive six-arm star-shaped poly(ethylene glycol-stat-propylene glycol) pre-polymers (Star PEG). Taken together, for Star-PEG-covered substrates we could demonstrate a profound reduction of various blood-biomaterial interactions compared to non-coated substrates, indicating the promising potential of this material as future coating for biomaterials with blood contact.

Abstract: The present study focuses on nanoparticles composed of amphiphilic poly(gamma-glutamic acid) (gamma-PGA) as potential protein carriers. Amphiphilic graft co-polymers composed of y-PGA as the hydrophilic backbone and L-phenylalanine ethylester (L-PAE) as the hydrophobic segment were synthesized by grafting L-PAE to y-PGA using water-soluble carbodiimide (WSC). Due to their amphiphilic properties, the gamma-PGA-graft-L-PAE co-polymer formed monodispersed nanoparticles in water. The particle size of the nanoparticles composed of gamma-PGA-graft-L-PAE (gamma-PGA nanoparticles) was about 200 nm and showed a highly negative zeta potential. To evaluate their potential applications as multifunctional protein carrier, we prepared protein-entrapped gamma-PGA nanoparticles by encapsulation, covalent immobilization or physical adsorption methods. For this purpose, 11 different proteins with various molecular weights and isoelectric points (pI values) were used as model proteins. The encapsulation of the protein into the nanoparticles was observed for all tested proteins. The amount of protein covalently immobilized or adsorbed onto the nanoparticles showed different tends based on the molecular weight and pI of each protein. Positively charged proteins could be adsorbed onto the negatively charged nanoparticles by electrostatic interaction. Moreover, it was found that enzyme-encapsulated nanoparticles showed higher enzymatic activity than surface-immobilized nanoparticles. These results indicated that the enzymatic activity of the enzyme-entrapped nanoparticles was significantly affected by the conjugation method, and that encapsulation was the optimal method for the conjugation of proteins and nanoparticles. It is expected that the y-PGA nanoparticle will have great potential as multifunctional carriers in pharmaceutical and biomedical applications, such as drug and vaccine delivery systems.

Abstract: Porous guided bone regeneration (GBR) membranes with selective permeability, hydrophilicity and adhesiveness to bone were prepared with PLGA and Pluronic F127 using an immersion precipitation method. The porous PLGA/Pluronic F127 membranes were fabricated by immersing the PLGA/Pluronic F127 mixture solution (in tetraglycol) in a mold into water. The PLGA/Pluronic F127 mixture was precipitated in water by the diffusion of water into PLGA/Pluronic F127 mixture solution. It was observed that the membrane has an asymmetric column-shape porous structure. The top surface of the membrane (water contact side) had nano-size pores (approx. 50 nm) which can effectively prevent from fibrous connective tissue invasion but permeate nutrients, while the bottom surface (mold contact size) had micro-size pores (approx. 40 μm) which can improve adhesiveness with bone. From the investigations of mechanical property, water absorbability, model nutrient permeability and preliminary in vivo bone regeneration, the hydrophilized...

Abstract: The ability of immature dendritic cells (iDCs) derived from human peripheral blood mononuclear cells to phagocytose poly(lactic-co-glycolic acid) (PLGA) microparticles (MPs) as compared to polystyrene MPs and the molecular aspects of this phagocytosis were investigated. Treating iDCs with PLGA or polystyrene fluorospheres of approximately 3 μm in diameter resulted in the internalization of the particles as evidenced by confocal laser scanning micrographs. This uptake of fluorospheres by DCs was decreased by pretreatment of cells with cytochalasin D or by incubation with the fluorospheres at 4°C, and was sensitive to EDTA and trypsin pretreatments in a dose-dependent manner. In agreement with our previous studies, treatment of iDCs with PLGA MPs, but not with polystyrene MPs, led to DC maturation, as measured by increase in release of the autocrine maturation cytokine, tumor necrosis factor-α, which was dependent on ratio of PLGA MPs to DCs. Taken together, this work begins to address the role of phagocyto...

Abstract: Poly(dimethyl siloxane) (PDMS) was bulk-modified to develop a new intra-cochlear electrode that can closely hug the inner wall of scala tympani (ST). The hydrophilicity of bulk and surface of PDMS was changed using a sequential method for preparation of interpenetrating polymer networks (IPNs). A series of IPNs, based on PDMS and poly(acrylic acid) (PAAc), was synthesized and characterized by means of attenuated total reflectance Fourier transform infrared spectroscopy, water contact-angle measurement, dynamic mechanical thermal analysis and peel strength tests. The performances of actual-sized fabricated electrodes were assessed inside a transparent model of ST, which was filled with saline. The cell behavior of L929 fibroblasts on materials was studied in vitro.

Abstract: In the first part of this review, we describe the synthesis of nanostructured hybrid materials composed of polysaccharides and synthetic polymers Amylose-synthetic polymer inclusion complexes were synthesized by amylose-forming polymerization using phosphorylase enzyme in the presence of synthetic polymers such as polyethers and polyesters Alginate-polymethacrylate hybrid materials were prepared by free-radical polymerization of cationic methacrylate in the presence of sodium alginate These methods allow the simultaneous control of the nanostructure with polymerization, giving well-defined hybrid materials In the second part of this review, we describe the synthesis of novel glycopolymers with rigid structures Polyaniline-based glycopolymers were synthesized by means of oxidative polymerization of N-glycosylaniline Polysiloxane-based glycopolymers were prepared by means of introduction of sugar-lactone to the rodlike polysiloxane These glycopolymers had regular higher-ordered structures due to their rigid polymer backbones, resulting in control of the three-dimensional array of sugar-residues

Abstract: A two-dimensional microarray technique of spherical multicellular aggregates (spheroids) using a microfabricated polydimethylsiloxane (PDMS) chip and the expression of liver-specific functions of primary rat hepatocytes on the chip were investigated. The PDMS chip, which was fabricated by a photolithography-based technique, consisted of approximately 2500 cylindrical microcavities (approximately 1100 cavities/cm2) in a triangular arrangement of 330 μm pitch on a PDMS plate (20 × 20 mm); each cavity measured 300 μm in diameter and 100 μm in depth. Most hepatocytes on the PDMS chip gradually gathered and subsequently formed a single spheroid in each cavity until 3 days of culture. A part of the spheroid was attached to the bottom or wall surface of the microcavity, and the spheroid configuration was maintained for at least 14 days of culture. Albumin secretion, ammonia removal and ethoxyresorufin O-dealkylase (EROD) activity, which is a cytochrome P-450-dependent reaction, of hepatocytes on the PDMS chip we...

Abstract: In this study, we investigate the fabrication of 3D porous poly(lactic-co-glycolic acid) (PLGA) scaffolds using the thermally-induced phase separation technique. The current study focuses on the selection of alternative solvents for this process using a number of criteria, including predicted solubility, toxicity, removability and processability. Solvents were removed via either vacuum freeze-drying or leaching, depending on their physical properties. The residual solvent was tested using gas chromatography-mass spectrometry. A large range of porous, highly interconnected scaffold architectures with tunable pore size and alignment was obtained, including combined macro- and microporous structures and an entirely novel 'porous-fibre' structure. The morphological features of the most promising poly(lactic-co-glycolic acid) scaffolds were analysed via scanning electron microscopy and X-ray micro-computed tomography in both two and three dimensions. The Young's moduli of the scaffolds under conditions of temperature, pH and ionic strength similar to those found in the body were tested and were found to be highly dependent on the architectures.

Abstract: Supermacroporous dextran gels (SDGs), having pores tens of micrometers in size and highly interconnected, were prepared from dextran macromonomer through radical polymerization at subzero temperatures and compared with dextran gels prepared at ambient temperature. Dextran macromonomer was synthesized via glycidyl methacrylate derivatization of dextran T500 in DMSO medium. The derivatization of dextran was confirmed by 1H-NMR and FT-IR spectroscopy. Scanning electron microscopy revealed macropores up to 100 μm in size. SDGs can be dried and re-swollen within seconds retaining their porous structure. The large size of interconnected pores, fast swelling and biocompatibility of dextran make SDGs promising material for tissue engineering and cell culture.

Abstract: Ultra-fine fibers of poly(vinyl alcohol)/polyethylenimine (PVA/PEI) were prepared by electrospinning of their blend solutions in water. Effects of PVA/PEI mass ratio and the polymer concentration on the fiber morphology were discussed by analysis of scanning electron micrographs. Results showed that uniform ultra-fine fibers could be obtained from an 8% PVA/PEI solution with 75:25 mass ratio. It was supposed that the introduction of PVA could promote electrospinning of PEI by weakening the intermolecular interaction and increasing solution viscosity. A composite membrane of PVA/PEI with poly(D,L-lactide) (PLA) was produced by co-electrospinning simultaneously from the aqueous 8% PVA/PEI (75:25) solution and a 20% PLA solution in N,N-dimethylformamide in two separated syringes. Fourier transform infrared spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy verified the existence of PVA/PEI and PLA in the fibrous membrane. We attempted to incorporate PEI with PLA as ultra-fine fibers to diminish the acidic inflammation caused by biodegradation of PLA. The fibrous composite membrane of PVA/PEI-PLA could provide better biocompatibility and would be used as drug-delivery carriers or tissue-engineering scaffolds.

Abstract: The aim of this study was to examine the feasibility of using a new low-modulus biodegradable thermoplastic elastomer for in vivo application as a stent cover. The new polymer, a thermoplastic elastomer, consists of a three-armed co-polymer of poly(lactide)acid (PLLA), poly(trimethylene carbonate) (PTMC) and poly(caprolactone) (PCL). A degradation study was performed in a buffer solution at 37°C for 4 and 6 weeks. The effect of degradation on mechanical properties was studied by stress-strain measurements and explained by using modulated DSC, GPC and mass measurements. A tapered block of PLLA and trimethylene carbonate connecting the crystalline outer part and the inner elastic part was highly susceptible to hydrolysis and caused rapid degradation and subsequent loss of mechanical properties. Random chain scission and homogenous hydrolysis resulted in a loss in mass and molecular weight. After 6 weeks of in vitro hydrolysis the molecular weight had decreased 54% and the elongation-at-break dropped from more than 300% to 90%. A medium free cell seeding study showed that endothelial cells adhered well to the polymeric material. An indicative animal study with the polymer acting as a stent cover showed very low levels of inflammation; however, pronounced neointima thickening was observed which was probably due to the premature failure of the material.

Abstract: A polyglycerol with dendritic structure (PGLD) was synthesized by ring-opening polymerization of deprotonated glycidol using a polyglycerol as core functionality in a step-growth process. Then, PGLD reacted with O-carboxymethylated chitosan to obtain PGLD-chitosan dendrimer (PGLD-Ch). After the reaction of PGLD-Ch with boric acid, there was a marked increase in the bulk viscosity evidencing physically that boron can initiate a charge transfer complex formation, (PGLD-Ch)B. Gel permeation chromatography analysis was used to characterize the molecular weight and the polydispersivity of the synthesized PGLD-Ch. A dendritic structure with a molecular mass of 16.7 kDa and a narrow polydispersity (Mw/Mn = 1.05) was obtained. 1H-NMR and 13C-NMR measurements were employed to assess the degree of branching in PGLD. The obtained value of 0.85 indicates the tendency toward a dentritic structure for PGLD. The glass transition temperature values of (PGLD-Ch)B membranes containing 10% and 30% PGLD were -19 degrees C and -26 degrees C, respectively, which favor its potential use as surface coating of several polymers. The in vitro cytotoxicity was evaluated using the minimum essential medium elution test assay. Extracts of boron-complexed PGLD exhibited lower cytotoxicity than the controls, suggesting that the material has an improved biocompatibility. Antibacterial studies of (PGLD-Ch)B against Staphylococcus aureus and Pseudomonas aeruginosa showed a significant activity. Our study confirms and supports the effectiveness of (PGLD-Ch)B as an antimicrobial coating due to its capacity in suppressing the bacterial proliferation. The best in vivo response was found for (PGLD-Ch)B-30 membranes, which exhibited higher synthesis of collagen fibers than PGLD-ChB-10.

Abstract: Human serum albumin (HSA)-immobilised magnetic poly(2-hydroxyethyl methacrylate) (mPHEMA) particles were investigated as an adsorbent for selective bilirubin removal from human plasma in a magnetically stabilized fluidized bed system. mPHEMA particles were prepared by suspension polymerization in the presence of Fe3O4 particles. mPHEMA particles were characterized by scanning electron microscopy (SEM), surface area and pore size measurements. The mPHEMA beads have a spherical shape and porous structure. The specific surface area of the mPHEMA particles was found to be 50 m2/g with a size range of 80–120 μm in diameter and the swelling ratio was 45%. Then, HSA was covalently coupled to the cyanogen bromide (CNBr)-activated mPHEMA particles. The amount of coupled HSA was arranged by changing the activation degree of particles (i.e., CNBr concentration). In vitro bilirubin removal was investigated from hyperbilirubinemic human plasma on the mPHEMA particles containing different amounts of immobilised HSA (be...

Abstract: Bile acids are natural compounds that play an important biological role in the body. They are candidates of choice as building blocks of biocompatible and degradable polymers. Bile acids have been ...

Abstract: A potential anti-cancer drug-delivery polymeric micelle system with an in vitro degradation half-life of about 48 h that releases its drug upon application of ultrasound was synthesized. This vehicle was composed of an amphiphilic co-polymer, poly(ethylene oxide)-b-poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate-lactate(n)). The degree of polymerization of the lactate side group, n, was 0, 3 or 5. The molar ratio of NIPAAm to HEMA-lactate(n) to PEO in polymerization was optimized to produce an in vitro polymeric micelle half-life of about 48 h at 40 degrees C. 1,6-Diphenyl-1,3,5-hexatriene (DPH) was used as a fluorescent probe to study the hydrophobicity of the cores of the polymeric micelles. The results showed that the cores of the polymeric micelles were hydrophobic enough to sequester DPH and the anti-cancer drug doxorubicin (Dox). Dox was encapsulated into the polymeric micelles having a molar feed ratio of NIPAAm to HEMA-lactate3 to PEO equal to 20:5:1; this drug was released upon the application of low-frequency ultrasound. The Dox release was about 2% at room temperature and 4% at body temperature, and the drug returned to the polymeric micelles when insonation ceased.

Abstract: Di-block co-polymers of poly(ethylene glycol)-poly(L-lactic acid) (PEG-PLLA) were prepared by ring-opening polymerization, and their self-association and micelle formation were investigated. The block co-polymers have the same block length of the hydrophilic PEG segment (M n = 2000), but different chain lengths of the hydrophobic PLLA segment (M n = 700, 1000 and 1300, respectively). The di-block co-polymers synthesized were characterized by GPC, 1H-NMR, TGA and DSC. The critical micelle concentration (CMC) of the PEG-PLLA micelles was determined at various temperatures (5–45°C) using a dye absorption technique involving fluorescence spectrophotometry with pyrene as a probe to monitor the change in the polarity of the microenvironment in the micelle. An increase in the molecular weight of the hydrophobic block decreases the CMC. The partition coefficients of pyrene between the micellar and aqueous phases range from 0.68 × 104 to 1.76 × 104, depending on the PLLA content in the block co-polymers. An Arrhen...

Abstract: The Rho GTPase cellular signaling cascade was investigated in pro-monocyte and (monocyte-)macrophage cells by examining GTPase expression and activation in serum-containing cultures on model biomaterials. Abundance of Rho GDI and the Rho GTPase proteins RhoA, Cdc42 and Rac1 was determined in cells grown on tissue-culture polystyrene, polystyrene, poly-L-lactide and Teflon® AF surfaces. Protein expression was compared based on cell maturity (pro-monocyte to monocyte to macrophage lineages) and by model surface chemistry: Rho proteins were present in the majority of macrophage cells tested on model surfaces suggesting that a pool of Rho proteins is readily available for signaling events in response to numerous activating cues, including biomaterials surface encounter. Rho GTPase activation profiles in these cell lines indicate active Cdc42 and Rho proteins in RAW 264.7, Rac1 and Rho in J774A.1, and Cdc42 and Rac1 in IC-21 cell lines, respectively. Collectively, these proteins are known to play critical role...

Abstract: Surface-modified gold nanoparticles have pronounced benefits in the biomedical field due to their significant interaction with delivery materials. In the present study we used hydrophobically-modified polycations (i.e., N-acylated chitosan) to stabilize gold nanoparticles. Aliphatic hydrophobic groups, having carbon chains of different lengths, were first grafted onto the backbone of chitosan by N-acylation with fatty-acid chlorides in order to increase its hydrophobicity. Gold nanoparticles stabilized with native chitosan and N-acylated chitosan were prepared by the graft-onto approach. Chemical modification and its quantification were studied by Fourier-transform infrared (FT-IR) spectroscopy. Further, the stabilized gold nanoparticles were characterized by different physico-chemical techniques such as UV-Vis, FT-IR, TEM, TGA and DLS. Spectral studies of gold nanoparticles show the backbone and the side chain functional groups of chitosan were not cleaved during the conjugation process. TEM observations revealed that the modified chitosan gold nanoparticles were well dispersed and spherical in shape with average size around 10-12 nm in triply-distilled water at pH 7.4, whereas the native chitosan gold nanoparticles appeared as clusters with 9.9 nm as average diameter and were dispersed only in dilute HCl. The size of modified chitosan gold nanoparticles varied depending on the length of grafting molecules.

Abstract: Bacterial cellulose (BC), produced by Acetobacter xylinum, and cotton linters as reference were surface modified by ozone-induced graft polymerization of acrylic acid and used as a template for crystallization of calcium phosphate. The grafting was verified using attenuated total reflection-infrared radiation (ATR-IR) and electron spectroscopy for chemical analysis (ESCA). ATR-IR revealed an additional absorption band at 1700 cm−1, corresponding to the carbonyl group in polyacrylic acid. ESCA figures show, apart from the characteristic peaks for cellulose, additional peaks at 285 eV and 289 eV that correspond to groups in acrylic acid. The grafting yield is higher on cotton linters compared with BC, which most likely has to do with differences in crystallinity and reactivity of the different cellulose materials. No morphology difference directly caused by grafting could be seen with scanning electron microscopy (SEM), which might indicate that acrylic acid was grafted as a thin film on the surface of the ...

Abstract: The objective of this paper is to compare the in vitro transfection efficiency of a luciferase plasmid DNA using cationized gelatin prepared from different amine compounds. The compounds used here were ethylenediamine, putrescine, spermidine and spermine, chemically introduced to the carboxyl group of gelatin for the cationization. Complexation of the cationized gelatin with the plasmid DNA was performed by simply mixing the two materials at various N+/P− mixing ratios (the molar number ratio of amino groups of gelatin to the phosphate groups of DNA) in aqueous solution. Gel retardation studies revealed that the formation of cationized-gelatin–plasmid DNA complexes depended on the N+/P− mixing ratio. The stronger interaction of plasmid DNA with the cationized gelatin of spermine compared to the other cationized gelatins was observed by an ethidium bromide intercalation assay and Scatchard binding analysis. When the transfection efficiency of plasmid DNA complexed with the various cationized gelatins at di...

Abstract: Structured poly(glycidyl methracrylate) (poly-GMA) brushes have been grafted onto flexible fluoro-polymer films using a radiation grafting process. The reactive epoxide of poly-GMA provides the basis for a versatile biofunctionalization of the grafted brushes. Structure definition by extreme ultraviolet (EUV) exposure allowed nanometer-scale resolution of periodic patterns. By variation of the exposure dose the height of the grafted structures can be adapted in a wide range. Derivatization of the grafted brushes included reaction with various amines with different side chains, hydrolysis of the epoxide to diols to increase protein resistance and introduction of ionic groups to yield poly-electrolytes. As an example for biofunctionalization, biotin was linked to the grafted brush and biofunctionality was demonstrated in a competitive biotin-streptavidin assay. In this article we also present a brief review of other approaches to obtain structured biofunctional polymer brushes.

Abstract: We have synthesized dendrimers of the amino-acid lysine bound to a central poly(ethylene glycol) (PEG) core, and then formed multiple diazeniumdiolate nitric oxide (NO) donors on the lysine residues. NO release from these materials occurred for up to 60 days under physiological conditions. These materials display the ability to regulate vascular cell proliferation and inhibit platelet adhesion to thrombogenic surfaces. When modified with a targeting ligand specific for inflamed endothelium (Sialyl Lewis X), we were able to demonstrate binding of fluorescently-labeled dendrimers to endothelial cells activated by interleukin 1β (IL-1β).