Journal• ISSN: 1671-8887
Electrical Engineering Materials
About: Electrical Engineering Materials is an academic journal. The journal publishes majorly in the area(s): Electrical contacts & Microstructure. Over the lifetime, 33 publications have been published receiving 54 citations.
Topics: Electrical contacts, Microstructure, Welding, Alloy, Contact resistance
Journal Tools
Papers
Journal Article•
TL;DR: In this paper, the research trend in recent years including effect factors and micro-model of contact resistance was expounded, the method to calculate and measure the contact resistance in electrical engineering was proposed.
Abstract: Electrical contact is an applied subject focusing on the reliability of electrical connect.Contact resistance is a fundamental index to judge the reliability of electrical contact system.In this paper,the research trend in recent years including effect factors and micro-model of contact resistance was expounded.The method to calculate and measure the contact resistance in electrical engineering was proposed.At last the trend of electrical contact in the future was point out.
15 citations
Journal Article•
TL;DR: In this paper, an experiment was carried out to understand how the operation cycle affect the make arc duration in the electrical endurance test under the different surge current conditions, and it was showed that the arcing duration is with the characteristic of randomness in each operation and does not have definite correlation with the operation cycles,and can get higher or lower or fluctuated in the test period.
Abstract: The experiment was carried out to understand how the operation cycle affect the make arc duration in the electrical endurance test under the different surge current conditions.It is showed that the arcing duration is with the characteristic of randomness in each operation and does not have definite correlation with the operation cycle,and can get higher or lower or fluctuated in the test period.
6 citations
Journal Article•
TL;DR: According to the silicone rubber used in the cool shrinkable cable accessory, the properties of stress relaxation under storage temperature of 40 ℃ and the operating temperatures of 70 and 90℃ were inversed through time-temperature equivalent principle,after the properties were measured under high temperatures of 140 and 180 � as discussed by the authors.
Abstract: According to the silicone rubber used in the cool shrinkable cable accessory,the properties of stress relaxation under storage temperature of 40 ℃ and the operating temperatures of 70 ℃ and 90 ℃ were inversed through time-temperature equivalent principle,after the properties of relaxation were measured under high temperatures of 140 ℃ and 180 ℃.The test results can be used not only for the lifetime predictions of cable accessory in run but also for the instruction of accessory storage period in the factory under pre-expanded state.
4 citations
Journal Article•
TL;DR: In this paper, the AgW(75) electrical contact material had been prepared by the process of infiltrating technology of powder metallurgy and repressing and resintering.
Abstract: The electrical contact materials are one of key factors influencing operation of switch appliances systems.It is not only apparatus carrying electric current but also parts of machines.It is requested to well conduct electricity and heat,resist arc erosion,melting and welding,low and stable electric resistance,have certain strength and be easy to process etc.In this study,the AgW(75) electrical contact material had been prepared by the process of infiltrating technology of powder metallurgy and repressing and resintering.The mechanic performance and electrical performance are measured and the micro-structure is observed.The results indicate that the relative density and hardness of AgW(75) electrical contact material can meet the demand of national standards.But the shrinkage rate of the material is big.
3 citations
Journal Article•
TL;DR: In this paper, an experiment rig with various features and capabilities was introduced to evaluate the effects of contact performance on the life of switch apparatus, and help the work of the contact materials component design.
Abstract: To better evaluate the effects of contact performance on the life of switch apparatus,and help the work of the contact materials component design, this paper introduces an experiment rig with various features and capabilities Then a clapper-type automotive relay is selected as a test object, and welding force, stationary force, impact force, contact displacement, and velocity,coil current, contact voltage and current during the switching process are analyzed
3 citations
Related Journals (5)
Journal of Wuhan University of Technology-materials Science Edition
3.7K papers, 18.8K citations
Performance Metrics
| Year | Papers |
|---|---|
| 2014 | 2 |
| 2013 | 4 |
| 2012 | 5 |
| 2011 | 8 |
| 2010 | 2 |
| 2009 | 4 |