Abstract: We have realized a fiber-based Fabry-Perot cavity with CO2 laser-machined mirrors. It combines very small size, high finesse F>=130000, small waist and mode volume, and good mode matching between the fiber and cavity modes. This combination of features is a major advance for cavity quantum electrodynamics (CQED), as shown in recent CQED experiments with Bose-Einstein condensates enabled by this cavity [Y. Colombe et al., Nature 450, 272 (2007)]. It should also be suitable for a wide range of other applications, including coupling to solid-state emitters, gas detection at the single-particle level, fiber-coupled single-photon sources and high-resolution optical filters with large stopband.

Abstract: Plasmon lasers create and sustain intense and coherent optical fields below light's diffraction limit with the unique ability to drastically enhance light-matter interactions bringing fundamentally new capabilities to bio-sensing, data storage, photolithography and optical communications. However, these important applications require room temperature operation, which remains a major hurdle. Here, we report a room temperature semiconductor plasmon laser with both strong cavity feedback and optical confinement to 1/20th of the wavelength. The strong feedback arises from total internal reflection of surface plasmons, while the confinement enhances the spontaneous emission rate by up to 20 times.

Abstract: A bilayered chiral metamaterial (CMM) is proposed to realize a 90 degree polarization rotator, whose giant optical activity is due to the transverse magnetic dipole coupling among the metallic wire pairs of enantiomeric patterns. By transmission through this thin bilayered structure of less than \lambda/30 thick, a linearly polarized wave is converted to its cross polarization with a resonant polarization conversion efficiency (PCE) of over 90%. Meanwhile, the axial ratio of the transmitted wave is better than 40 dB. It is demonstrated that the chirality in the propagation direction makes this efficient cross-polarization conversion possible. The transversely isotropic property of this polarization rotator is also experimentally verified. The optical activity of the present structure is about 2700 degree/\lambda, which is the largest optical activity that can be found in literature.

Abstract: Alternative materials are required to enhance the efficacy of plasmonic devices. We discuss the optical properties of a number of alloys, doped metals, intermetallics, silicides, metallic glasses and high pressure materials. We conclude that due to the probability of low frequency interband transitions, materials with partially occupied d-states perform poorly as plasmonic materials, ruling out many alloys, intermetallics and silicides as viable. The increased probability of electron-electron and electron-phonon scattering rules out many doped and glassy metals.

Abstract: Coupled split-ring-resonator metamaterials have previously been shown to exhibit large coupling effects, which are a prerequisite for obtaining large effective optical activity. By a suitable lateral arrangement of these building blocks, we completely eliminate linear birefringence and obtain pure optical activity and connected circular optical dichroism. Experiments at around 100-THz frequency and corresponding modeling are in good agreement. Rotation angles of about 30 degrees for 205nm sample thickness are derived.

Abstract: We demonstrate a scheme, based on a cascade of lithium niobate intensity and phase modulators driven by specially tailored radio frequency waveforms to generate an optical frequency comb with very high spectral flatness. In this work we demonstrate a 10 GHz comb with ~40 lines with spectral power variation below 1-dB and ~60 lines in total. The number of lines that can be generated is limited by the power handling capability of the phase modulator, and this can be scaled without compromising the spectral flatness. Furthermore, the spectral phase of the generated combs in our scheme is almost purely quadratic which, as we will demonstrate, allows for very high quality pulse compression using only single mode fiber.

Abstract: A deterministic design of an ultrahigh Q, wavelength scale mode volume photonic crystal nanobeam cavity is proposed and experimentally demonstrated. Using this approach, cavities with Q>10^6 and on-resonance transmission T>90% are designed. The devices fabricated in Si and capped with low-index polymer, have Q=80,000 and T=73%. This is, to the best of our knowledge, the highest transmission measured in deterministically designed, wavelength scale high Q cavities.

Abstract: We demonstrate that the intrinsic properties of monolayer graphene allow it to act as a more effective saturable absorber for mode-locking fiber lasers compared to multilayer graphene. The absorption of monolayer graphene can be saturated at lower excitation intensity compared to multilayer graphene, graphene with wrinkle-like defects, and functionalized graphene. Monolayer graphene has a remarkable large modulation depth of 95.3%, whereas the modulation depth of multilayer graphene is greatly reduced due to nonsaturable absorption and scattering loss. Picoseconds ultrafast laser pulse (1.23 ps) can be generated using monolayer graphene as saturable absorber. Due to the ultrafast relaxation time, larger modulation depth and lower scattering loss of monolayer graphene, it performs better than multilayer graphene in terms of pulse shaping ability, pulse stability and output energy.

Abstract: We demonstrate a controllable electromagnetic wave reflector/absorber for different polarizations with metamaterial involving electromagnetic resonant structures coupled with diodes. Through biasing at different voltages to turn ON and OFF the diodes, we are able to switch the structure between nearly total reflection and total absorption of a particularly polarized incident wave. By arranging orthogonally orientated resonant cells, the metamaterial can react to different polarized waves by selectively biasing the corresponding diodes. Both numerical simulations and microwave measurements have verified the performance.

Abstract: The emerging field of silicon photonics seeks to unify the high bandwidth of optical communications with CMOS microelectronic circuits. Many components have been demonstrated for on-chip optical communications, including those that utilize the nonlinear optical properties of silicon[1, 2], silicon dioxide[3, 4] and silicon nitride[5, 6]. Processes such as second harmonic generation, which are enabled by the second-order susceptibility, have not been developed since the bulk $\chi^{(2)}$ vanishes in these centrosymmetric CMOS materials. Generating the lowest-order nonlinearity would open the window to a new array of CMOS-compatible optical devices capable of nonlinear functionalities not achievable with the?$\chi^{(3)}$ response such as electro-optic modulation, sum frequency up-conversion, and difference frequency generation. Here we demonstrate second harmonic (SH) generation in CMOS compatible integrated silicon nitride (Si3N4) waveguides. The $\chi^{(2)}$ response is induced in the centrosymmetric material by using the nanoscale structure to break the bulk symmetry. We use a high quality factor Q ring resonator cavity to enhance the efficiency of the nonlinear optical process and detect SH output with milliwatt input powers.

Abstract: A uniaxial chiral metamaterial is constructed by double-layered four "U" split ring resonators mutually twisted by 90 degrees. It shows a giant optical activity and circular dichroism. The retrieval results reveal that a negative refractive index is realized for circularly polarized waves due to the large chirality. The experimental results are in good agreement with the numerical results.

Abstract: The Purcell factor is the standard figure of merit for spontaneous emission enhancement in microcavities, that has also been proposed to describe emission enhancements for plasmonic resonances. A comparison is made of quality factor, mode volume and Purcell factor for single and coupled plasmon spheres to exact calculations of emission rates. The paper explains why the Purcell factor is not appropriate for plasmon antennas.

Abstract: Optical frequency-comb-based-high-resolution spectrometers offer enormous potential for spectroscopic applications. Although various implementations have been demonstrated, the lack of suitable mid-infrared comb sources has impeded explorations of molecular fingerprinting. Here we present for the first time a frequency-comb Fourier transform spectrometer operating in the 2100-to-3700-cm-1 spectral region that allows fast and simultaneous acquisitions of broadband absorption spectra with up to 0.0056 cm-1 resolution. We demonstrate part-per-billion detection limits in 30 seconds of integration time for various important molecules including methane, ethane, isoprene, and nitrous oxide. Our system enables precise concentration measurements even in gas mixtures that exhibit continuous absorption bands, and it allows detection of molecules at levels below the noise floor via simultaneous analysis of multiple spectral features. This system represents a near real-time, high-resolution, high-bandwidth mid-infrared spectrometer which is ready to replace traditional Fourier transform spectrometers for many applications in trace gas detection, atmospheric science, and medical diagnostics.

Abstract: We demonstrate a miniature self-injection locked DFB laser using resonant optical feedback from a high-Q crystalline whispering gallery mode resonator. The linewidth reduction factor is greater than 10,000, with resultant instantaneous linewidth less than 200 Hz. The minimal value of the Allan deviation for the laser frequency stability is 3x10^(-12) at the integration time of 20 us. The laser possesses excellent spectral purity and good long term stability.

Abstract: In this work, we investigate wave transmission through an epsilon-near-zero metamaterial waveguide embedded with defects. We show that by adjusting the geometric sizes and material properties of the defects, total reflection and even transmission can be obtained, despite the impedance mismatch of epsilon-near-zero material with free space. Our work can greatly simplify the design of zero-index material waveguide applications by removing the dependence on permeability.

Abstract: The development of innovative terahertz (THz) imaging systems has recently moved in the focus of scientific efforts due to the ability to screen substances through textiles or plastics. The invention of THz imaging systems with high spatial resolution is of increasing interest for applications in the realms of quality control, spectroscopy in dusty environment and security inspections. One of the main restrictions of current THz imaging systems is the low spatial resolution which is limited by a lack of THz lenses with strong focusing capabilities. Here we present the design, fabrication and the measurement of the optical properties of spectrally broadband metamaterial-based gradient index (GRIN) lenses that allow one to focus THz radiation to a spot diameter smaller than the wavelength. Due to the subwavelength thickness and the high focusing strength the presented GRIN lenses are an important step towards compact THz imaging systems with strongly improved spatial resolution.

Abstract: We experimentally demonstrate the first metamaterial "illusion optics" device - an "invisible gateway" by using a transmission-line medium. The device contains an open channel that can block electromagnetic waves at a particular frequency range. We also demonstrate that such a device can work in a broad frequency range.

Abstract: In this paper, we report fast calculation of a computer-generated-hologram using a new architecture of the HD5000 series GPU (RV870) made by AMD and its new software development environment, OpenCL. Using a RV870 GPU and OpenCL, we can calculate 1,920 * 1,024 resolution of a CGH from a 3D object consisting of 1,024 points in 30 milli-seconds. The calculation speed realizes a speed approximately two times faster than that of a GPU made by NVIDIA.

Abstract: The spectral characteristics of a fiber Bragg grating (FBG) with a transversely inhomogeneous refractive index profile, differs con- siderably from that of a transversely uniform one. Transmission spectra of inhomogeneous and asymmetric FBGs that have been inscribed with focused ultrashort pulses with the so-called point-by-point technique are investigated. The cladding mode resonances of such FBGs can span a full octave in the spectrum and are very pronounced (deeper than 20dB). Using a coupled-mode approach, we compute the strength of resonant coupling and find that coupling into cladding modes of higher azimuthal order is very sensitive to the position of the modification in the core. Exploiting these properties allows precise control of such reflections and may lead to many new sensing applications.

Abstract: We analyze numerically the optical response and effective macroscopic parameters of fishnet metamaterials infiltrated with a nematic liquid crystal. We show that even a small amount of liquid crystal can provide tuning of the structures due to reorientation of the liquid crystal director. This enables switchable optical metamaterials, where the refractive index can be switched from positive to negative by an external field. This tuning is primarily determined by the shift of the cut-off wavelength of the holes, with only a small influence due to the change in plasmon dispersion

Abstract: We report controlled manipulation of mode splitting in an optical microresonator coupled to two nanoprobes. It is demonstrated that, by controlling the positions of the nanoprobes, the split modes can be tuned simultaneously or individually and experience crossing or anti-crossing in frequency and linewidth. A tunable transition between standing wave mode and travelling wave mode is also observed. Underlying physics is discussed by developing a two-scatterer model which can be extended to multiple scatterers. Observed rich dynamics and tunability of split modes in a single microresonator will find immediate applications in optical sensing, opto-mechanics, filters and will provide a platform to study strong light-matter interactions in two-mode cavities.

Abstract: Photonic crystal lasers operating at room temperature based on high Q/V nanobeam cavities have been demonstrated. We reported a large spontaneous emission factor (~0.97) by fitting the L-L curve with the rate equations.

Abstract: We demonstrate channel selective 0.1-Gb/s photo-receiver operation at telecom wavelength using a silicon high-Q photonic crystal nanocavity with a laterally integrated p-i-n diode. Due to the good crystal property of silicon the measured dark current is only 15 pA. The linear and nonlinear characteristics are investigated in detail, in which we found that the photo-current is enhanced of more than 100,000 due to the ultrahigh-Q (>100,000). With the help of two-photon absorption, which is visible at a surprisingly low input power of 10 nW, the quantum efficiency of this device reaches about 10%.

Abstract: We report an experimental observation of three distinct resonances in split ring resonators (SRRs) for both vertical and horizontal electric field polarizations at normal incidence by use of terahertz time domain spectroscopy. Breaking the symmetry in SRRs by gradually displacing the capacitive gap from the center towards the corner of the ring allows for an 85% modulation of the fundamental inductive-capacitive resonance. Increasing asymmetry leads to the evolution of an otherwise inaccessible high quality factor electric quadrupole resonance that can be exploited for bio-sensing applications in the terahertz region.

Abstract: Superconducting terahertz (THz) metamaterial (MM) made from superconducting Nb film has been investigated using a continuous-wave THz spectroscopy with a superconducting split-coil magnet. The obtained quality factors of the resonant modes at 132 GHz and 450 GHz are about three times as large as those calculated for a metal THz MM operating at 1 K, which indicates that superconducting THz MM is a very nice candidate to achieve low loss performance. In addition, the magnetic field-tuning on superconducting THz MM is also demonstrated, which offer an alternative tuning method apart from the existed electric, optical and thermal tuning on THz MM.

Abstract: Artificially built periodic optical structures in dielectric and metallic media have generated considerable interest due to their potential for optical device miniaturization. In this context plasmonics, i.e., optics based on surface plasmon polaritons (SPPs) offers new exciting prospects. SPPs are hybrid light/electron surface waves at the interface between a dielectric and a metal and as such hold the potential for 2D optical functionality. Indeed, SPP elements as mirrors, splitters and interferometers have been recently demonstrated. However, for plasmonics to qualify at the information technology level requires necessarily the realization of wavelength division (demultiplexing) which constitutes a fundamental ingredient of optical communication. In the following we experimentally demonstrate 2D SPP demultiplexing in the visible spectral range by using photonic crystals for SPPs (plasmonic crystals). In addition, we demonstrate that plasmonic crystal are capable of realizing integrated linear multiports which could constitute building blocks of analog or quantum optical computing.

Abstract: We present a gradient-index (GRIN) metamaterial based on an array of annular slots. The structure allows a large variation of the effective refractive index under normal-to-plane incidence and thus enables the construction of GRIN devices consisting of only a small number of functional layers. Using full-wave simulations, we demonstrate the annular slot concept by means of a 3-unit-cell thin GRIN lens for the terahertz (THz) range. In the presented realizations, we achieved an index contrast of Delta n = 1.5 resulting in a highly refractive lens suitable for focusing THz radiation to a spot size smaller than the wavelength.

Abstract: Single photons are fundamental elements for quantum information technologies such as quantum cryptography, quantum information storage and optical quantum computing. Colour centres in diamond have proven to be stable single photon sources and thus essential components for reliable and integrated quantum information technology. A key requirement for such applications is a large photon flux and a high efficiency. Paying tribute to various attempts to maximise the single photon flux we show that collection efficiencies of photons from colour centres can be increased with a rather simple experimental setup. To do so we spin-coated nanodiamonds containing single nitrogen-vacancy colour centres on the flat surface of a ZrO2 solid immersion lens. We found stable single photon count rates of up to 853 kcts/s at saturation under continuous wave excitation while having excess to more than 100 defect centres with count rates from 400 kcts/s to 500 kcts/s. For a blinking defect centre we found count rates up to 2.4 Mcts/s for time intervals of several ten seconds. It seems to be a general feature that very high rates are accompanied by a blinking behaviour. The overall collection efficiency of our setup of up to 4.2% is the highest yet reported for N-V defect centres in diamond. Under pulsed excitation of a stable emitter of 10 MHz, 2.2% of all pulses caused a click on the detector adding to 221 kcts/s thus opening the way towards diamond based on-demand single photon sources for quantum applications.

Abstract: We have searched for stimulated photon scattering in vacuum at a center of mass photon energy of 0.8 eV. The QED contribution to this process is equivalent to four wave mixing in vacuum. No evidence for gamma-gamma scattering was observed. The corresponding upper limit of the cross section is sigma_Lim=1.5 10^{-48}cm2.