Abstract: Transformation elasticity, by analogy with transformation acoustics and optics, converts material domains without altering wave properties, thereby enabling cloaking and related effects. By noting the similarity between transformation elasticity and the theory of incremental motion superimposed on finite pre-strain it is shown that the constitutive parameters of transformation elasticity correspond to the density and moduli of small-on-large theory. The formal equivalence indicates that transformation elasticity can be achieved by selecting a particular finite (hyperelastic) strain energy function, which for isotropic elasticity is semilinear strain energy. The associated elastic transformation is restricted by the requirement of statically equilibrated pre-stress. This constraint can be cast as $\tr {\mathbf F} =$ constant, where $\mathbf{F}$ is the deformation gradient, subject to symmetry constraints, and its consequences are explored both analytically and through numerical examples of cloaking of anti-plane and in-plane wave motion.

Abstract: We have developed a new method of an earthquake-resistant design to support conventional aseismic designs using acoustic metamaterials. We suggest a simple and practical method to reduce the amplitude of a seismic wave exponentially. Our device is an attenuator of a seismic wave. Constructing a cylindrical shell-type waveguide that creates a stop-band for the seismic wave, we convert the wave into an evanescent wave for some frequency range without touching the building we want to protect.

Abstract: It is shown that nonlinear elastic pre-stress of neo-Hookean hyperelastic materials can be used as a mechanism to generate finite cloaks and thus render objects near-invisible to incoming antiplane elastic waves. This approach appears to negate the requirement for special cloaking metamaterials with inhomogeneous and anisotropic material properties in this case. These properties are induced naturally by virtue of the pre-stress. This appears to provide a mechanism for broadband cloaking since dispersive effects due to metamaterial microstructure will not arise.

Abstract: A theory is presented showing that cloaking of objects from antiplane elastic waves can be achieved by elastic pre-stress of a neo-Hookean nonlinear elastic material. This approach would appear to eliminate the requirement of metamaterials with inhomogeneous anisotropic shear moduli and density. Waves in the pre-stressed medium are bent around the cloaked region by inducing inhomogeneous stress fields via pre-stress. The equation governing antiplane waves in the pre-stressed medium is equivalent to the antiplane equation in an unstressed medium with inhomogeneous and anisotropic shear modulus and isotropic scalar mass density. Note however that these properties are induced naturally by the pre-stress. Since the magnitude of pre-stress can be altered at will, this enables objects of varying size and shape to be cloaked by placing them inside the fluid-filled deformed cavity region.

Abstract: This work gives a brief summary of major formulations of the third law of thermodynamics and their implications, including the impossibility of perpetual motion of the third kind. The last sections of this work review more advanced applications of the third law to systems with negative temperatures and negative heat capacities. The relevance of the third law to protecting the arrow of time in general relativity is also discussed. Additional information, which may useful in analysis of the third law, is given in the Appendices. This short review is written to assist lecturers in selecting a strategy for teaching the third law of thermodynamics to engineering and science students. The paper provides a good summary of the various issues associated with the third law, which are typically scattered over numerous research publications and not discussed in standard textbooks.

Abstract: It is shown that the self inductance of a wire loop may be written as a curve integral akin to the Neumann formula for the mutual inductance of two wire loops The only difference is that contributions where the two integration variables get too close to each other must be excluded from the curve integral and evaluated in detail The contributions of these excluded segments depend on the distribution of the current in the cross section of the wire They add to a simple constant proportional to the wire length The error of the new expression is of first order in the wire radius if there are sharp corners and of second order in the wire radius for smooth wire loops

Abstract: It is shown that the use of the Riemann-Silberstein (RS) vector greatly simplifies the description of the electromagnetic field both in the classical domain and in the quantum domain. In this review we describe many specific examples where this vector enables one to significantly shorten the derivations and make them more transparent. We also argue why the RS vector may be considered as the best possible choice for the photon wave function.

Abstract: Acoustic Bessel beams are known to produce an axial radiation force on a sphere centered on the beam axis (on-axial configuration) that exhibits both "pressor" and "tractor" behaviors. The pressor and the tractor forces are oriented along the beam's direction of propagation and opposite to it, respectively. The behavior of the acoustic radiation force generated by Bessel beams when the sphere lies outside the beam's axis (off-axial configuration) is unknown. Using the 3D radiation force formulas given in terms of the partial wave expansion coefficients for the incident and scattered waves, both axial and transverse components of the force exerted on a silicone-oil sphere are obtained for a zero- and a first-order Bessel vortex beam. As the sphere departs from the beam's axis, the tractor force becomes weaker. Moreover, the behavior of the transverse radiation force field may vary with the sphere's size factor $ka$ (where $k$ is the wavenumber and $a$ is the sphere radius). Both stable and unstable equilibrium regions around the beam's axis are found depending on $ka$ values. These results are particularly important for the design of acoustical tractor beam devices operating with Bessel beams.

Abstract: The central collision between two solid spheres or the normal collision between a sphere and a plate are important to understand in detail before studying more complex particle interactions Models exist to describe this basic problem but are not always consistent with available experiments An interesting benchmark to compare models and experiments is the relation between the normal coefficient of restitution e and the incident velocity v In order to draw a broad comparison between experiments and models (Krijt, S, Guttler, C, Heiselmann, D, Tielens, AGGM, Dominik, C, Energy dissipation in head-on collisions of spheres, submitted), we provide in this article an overview on the literature describing experiments on normal collisions, preferably providing data on e(v) We will briefly summarize our expectation on this relation according to an established collision model in order to classify these experiments We will then provide an overview on experimental techniques, which we found in the summarized articles, as well as a listing of all experiments along with a description of the main features of these The raw data on e(v) of the listed experiments were digitized and are provided with this article

Abstract: This chapter is aimed at introducing the fundamentals of spur and helical gear dynamics. Using three-dimensional lumped models and a thin-slice approach for mesh elasticity, the general equations of motion for single-stage spur or helical gears are presented. Some particular cases including the classic one degree-of-freedom model are examined in order to introduce and illustrate the basic phenomena. The interest of the concept of transmission errors is analysed and a number of practical considerations are deduced. Emphasis is deliberately placed on analytical results which, although approximate, allow a clearer understanding of gear dynamics than that provided by extensive numerical simulations. Some extensions towards continuous models are presented.

Abstract: Recently Mansuripur has called into question the validity of the Lorentz force in connection with relativistic electromagnetic theory. Here we present some very simple point-charge systems treated through order v^{2}/c^{2} in order to clarify some aspects of relativistic controversies both old and new. In connection with the examples, we confirm the validity of the relativistic conservation laws. The relativistic examples make clear that external forces may produce a vanishing torque in one inertial frame and yet produce a non-zero torque in another inertial frame, and that the conservation of angular momentum will hold in both frames. We also discuss a relativistic point-charge model for a magnetic moment and comment on the interaction of a point charge and a magnetic moment. Mansuripur's claims of incompatibiltiy between the Lorentz force and relativity are seen to be invalid.

Abstract: This paper presents and discusses the conditions for zero electromagnetic scattering by electrically small particles. We consider the most general bi-anisotropic particles, characterized by four dyadic polarizabilities and study the case of uniaxially symmetric objects. Conditions for zero backward and forward scattering are found for a general uniaxial bi-anisotropic particle and specialized for all fundamental classes of bi-anisotropic particles: omega, "moving", chiral, and Tellegen particles. Possibility for zero total scattering is also discussed for aforementioned cases. The scattering pattern and polarization of the scattered wave are also determined for each particle class. In particular, we analyze the interplay between different scattering mechanisms and show that in some cases it is possible to compensate scattering from a polarizable particle by appropriate magneto-electric coupling. Examples of particles providing zero backscattering and zero forward scattering are presented and studied numerically.

Abstract: Jacobi elliptic functions are flexible functions that appear in a variety of problems in physics and engineering. We introduce and describe important features of these functions and present a physical example from classical mechanics where they appear: a bead on a spinning hoop. We determine the complete analytical solution for the motion of a bead on the driven hoop for arbitrary initial conditions and parameter values.

Abstract: Liquid resin infusion (LRI) processes are promising manufacturing routes to produce large, thick, or complex structural parts. They are based on the resin flow induced, across its thickness, by a pressure applied onto a preform/resin stacking. However, both thickness and fiber volume fraction of the final piece are not well controlled since they result from complex mechanisms which drive the transient mechanical equilibrium leading to the final geometrical configuration. In order to optimize both design and manufacturing parameters, but also to monitor the LRI process, an isothermal numerical model has been developed which describes the mechanical interaction between the deformations of the porous medium and the resin flow during infusion.1, 2 With this numerical model, it is possible to investigate the LRI process of classical industrial part shapes. To validate the numerical model, first in 2D, and to improve the knowledge of the LRI process, this study details a comparison between numerical simulations and an experimental study of a plate infusion test carried out by LRI process under industrial conditions. From the numerical prediction, the filling time, the resin mass and the thickness of the preform can be determined. On another hand, the resin flow and the preform response can be monitored by experimental methods during the filling stage. One key issue of this research study is to highlight the changes in major process parameters during the resin infusion stage, such as the temperature of the preform and resin, and the variations of both thickness and fiber volume fraction of the preform. Moreover, this numerical/experimental approach is the best way to improve our knowledge on the resin infusion processes, and finally, to develop simulation tools for the design of advanced composite parts.

Abstract: Reed instruments are modeled as self-sustained oscillators driven by the pressure inside the mouth of the musician. A set of nonlinear equations connects the control parameters (mouth pressure, lip force) to the system output, hereby considered as the mouthpiece pressure. Clarinets can then be studied as dynamical systems, their steady behavior being dictated uniquely by the values of the control parameters. Considering the resonator as a lossless straight cylinder is a dramatic yet common simplification that allows for simulations using nonlinear iterative maps. In this paper, we investigate analytically the effect of a time-varying blowing pressure on the behavior of this simplified clarinet model. When the control parameter varies, results from the so-called dynamic bifurcation theory are required to properly analyze the system. This study highlights the phenomenon of bifurcation delay and defines a new quantity, the dynamic oscillation threshold. A theoretical estimation of the dynamic oscillation threshold is proposed and compared with numerical simulations.

Abstract: A set of 55 clarinet reeds is observed by holography, collecting 2 series of measurements made under 2 different moisture contents, from which the resonance frequencies of the 15 first modes are deduced A statistical analysis of the results reveals good correlations, but also significant differences between both series Within a given series, flexural modes are not strongly correlated A Principal Component Analysis (PCA) shows that the measurements of each series can be described with 3 factors capturing more than $90\%$ of the variance: the first is linked with transverse modes, the second with flexural modes of high order and the third with the first flexural mode A forth factor is necessary to take into account the individual sensitivity to moisture content Numerical 3D simulations are conducted by Finite Element Method, based on a given reed shape and an orthotropic model A sensitivity analysis revels that, besides the density, the theoretical frequencies depend mainly on 2 parameters: $E_L$ and $G_{LT}$ An approximate analytical formula is proposed to calculate the resonance frequencies as a function of these 2 parameters The discrepancy between the observed frequencies and those calculated with the analytical formula suggests that the elastic moduli of the measured reeds are frequency dependent A viscoelastic model is then developed, whose parameters are computed as a linear combination from 4 orthogonal components, using a standard least squares fitting procedure and leading to an objective characterization of the material properties of the cane \textit{Arundo donax}

Abstract: The current density of a moving electric dipole is expressed as the sum of polarization and magnetization currents. The magnetic field due to the latter current is that of a magnetic dipole moment that is consistent with the relativistic transformations of the polarization and magnetization of macroscopic electrodynamics.

Abstract: The human sense of hearing perceives a combination of sounds 'in tune' if the corresponding harmonic spectra are correlated, meaning that the neuronal excitation pattern in the inner ear exhibits some kind of order. Based on this observation it is suggested that musical instruments such as pianos can be tuned by minimizing the Shannon entropy of suitably preprocessed Fourier spectra. This method reproduces not only the correct stretch curve but also similar pitch fluctuations as in the case of high-quality aural tuning.

Abstract: In his monograph Thermodynamics, I. M\"uller proves that for incompressible media the volume does not change with the temperature. This M\"uller paradox yields an incompatibility between experimental evidence and the entropy principle. This result has generated much debate within the mathematical and thermodynamical communities as to the basis of Boussinesq approximation in fluid dynamics. The aim of this paper is to prove that for an appropriate definition of incompressibility, as a limiting case of quasi thermal-incompressible body, the entropy principle holds for pressures smaller than a critical pressure value. The main consequence of our result is the physically obvious one, that for very large pressures, no body can be perfectly incompressible. The result is first established in the fluid case. In the case of hyperelastic media subject to large deformations the approach is similar, but with a suitable definition of the pressure associated with convenient stress tensor decomposition.

Abstract: Starting from the experimental fact that a moving charge experiences the Lorentz force and applying the fundamental principles of simplicity (first order derivatives only) and linearity (superposition principle), we show that the structure of the microscopic Maxwell equations for the electromagnetic fields can be deduced heuristically by using the transformation properties of the fields under space inversion and time reversal. Using the experimental facts of charge conservation and that electromagnetic waves propagate with the speed of light together with Galileo invariance of the Lorentz force allows us to introduce arbitrary electrodynamic units naturally.

Abstract: A classical problem in electromagnetics concerns the representation of the electric and magnetic fields in the low-frequency or static regime, where topology plays a fundamental role. For multiply connected conductors, at zero frequency the standard boundary conditions on the tangential components of the magnetic field do not uniquely determine the vector potential. We describe a (gauge-invariant) consistency condition that overcomes this non-uniqueness and resolves a longstanding difficulty in inverting the magnetic field integral equation.

Abstract: An easy-to-implement scheme to split self-collimated acoustic beams in sonic crystals (SCs) is proposed by introducing line-defects into SCs, by which an incoming self-collimated beam can be split into a 90 degree-bended one and a transmitted one with an arbitrary power ratio by adjusting the value of defect size. An all-angle and wide-band splitting instrument is demonstrated with nearly perfect efficiency (more than 90%) for Gaussian beams at a wide range of incident angles. Splitting effect for a point source as input is also realized, in which two subwavelength images of the source, i.e., a bended one and a transmitted one, are formed by our designed splitting structure. Finally, the proposed one-to-two splitting scheme is generalized to one-to-N (N>2) cases by inserting more rows of line defects into the SC.

Abstract: We analyze a very simple variant of the Lorentz pendulum, in which the length is varied exponentially, instead of uniformly, as it is assumed in the standard case. We establish quantitative criteria for the condition of adiabatic changes in both pendula and put in evidence their substantially different physical behavior with regard to adiabatic invariance.

Abstract: Analytical expressions are provided for the configurations of an inextensible, flexible, twistable inertial string rotating rigidly about a fixed axis. Solutions with trivial radial dependence are helices of arbitrary radius and pitch. Non-helical solutions are governed by a cubic equation whose roots delimit permissible values of the squared radial coordinate. Only curves coplanar with the axis of rotation make contact with it.

Abstract: In this paper we show how appropriate superpositions of Bessel beams can be successfully used to obtain arbitrary longitudinal intensity patterns of nondiffracting ultrasonic wavefields with very high transverse localization. More precisely, the method here described allows generating longitudinal acoustic pressure fields, whose longitudinal intensity patterns can assume, in principle, any desired shape within a freely chosen interval 0 > (FW). The paper presents various cases of FWs in water, and investigates their aperture characteristics, such as minimum required size and ring dimensioning, as well as the influence they have on the proper generation of the desired FW patterns. The FWs are particular Localized Solutions to the wave equation that can be used in many applications, like new kinds of devices, such as, e.g., acoustic tweezers or scalpels, and especially various ultrasound medical apparatus; e.g. for attempting the destruction of tumor cells without affecting the preceding and subsequent (and surrounding) tissues. Keywords: Ultrasound; Frozen Waves; Bessel beam superpositions; Non-diffractive waves; Localized Waves; Annular transducers.

Abstract: It is pointed out that recent cosmological findings seem to support the view that the mass/energy distribution of the universe defines the Newtonian inertial frames as originally suggested by Mach. The background concepts of inertial frame, Newton's second law, and fictitious forces are clarified. A precise definition of Mach's principle is suggested. Then an approximation to general relativity discovered by Einstein, Infeld, and Hoffmann is used and it is found that this precise formulation of Mach's principle is realized provided the mass/energy density of the universe has a specific value. This value turns out to be twice the critical density. The implications of this approximate result is put into context.

Abstract: The extreme characteristics of long wave run-up are studied in this paper. First we give a brief overview of the existing theory which is mainly based on the hodograph transformation (Carrier & Greenspan, 1958). Then, using numerical simulations, we build on the work of Stefanakis et al. (2011) for an infinite sloping beach and we find that resonant run-up amplification of monochromatic waves is robust to spectral perturbations of the incoming wave and resonant regimes do exist for certain values of the frequency. In the setting of a finite beach attached to a constant depth region, resonance can only be observed when the incoming wavelength is larger than the distance from the undisturbed shoreline to the seaward boundary. Wavefront steepness is also found to play a role in wave run-up, with steeper waves reaching higher run-up values.

Abstract: We propose to identify process zones in heterogeneous materials by tailored statistical tools. The process zone is redefined as the part of the structure where the random process cannot be correctly approximated in a low-dimensional deterministic space. Such a low-dimensional space is obtained by a spectral analysis performed on pre-computed solution samples. A greedy algorithm is proposed to identify both process zone and low-dimensional representative subspace for the solution in the complementary region. In addition to the novelty of the tools proposed in this paper for the analysis of localised phenomena, we show that the reduced space generated by the method is a valid basis for the construction of a reduced order model.

Abstract: The Rattleback is a very popular science toy shown to students all over the world to demonstrate the non-triviality of rotational motion. When spun on a horizontal table, this boat-shaped object behaves in a peculiar way. Although the object appears symmetric, the dynamics of its motion seem very asymmetric. When spun in the preferred direction, it spins smoothly, whereas in the other direction it starts to oscillate wildly. The oscillation soon dies out and the rattleback starts to spin in the preferred way. We will construct and go through an analytical model capable of explaining this behaviour in a simple and intelligible way. Although we aim at a semi-pedagogical treatise, we will study the details only when they are necessary to understand the calculation. After presenting the calculations we will discuss the physical validity of our assumptions and take a look at more sophisticated models requiring numerical analysis. We will then improve our model by assuming a simple friction force.