Zhuguo Li
Shanghai Jiao Tong University
189 Papers
432 Citations
Zhuguo Li is an academic researcher from Shanghai Jiao Tong University. The author has contributed to research in topics: Microstructure & Coating. The author has an hindex of 27, co-authored 155 publications. Previous affiliations of Zhuguo Li include Kindai University.
Chat about Author
Papers
Effect of vanadium addition on the microstructure and properties of NiCuBSi-WC60 composite coatings deposited by laser direct deposition
TL;DR: In this article , the influence mechanism of vanadium(V) addition on the microstructure and properties of NiCuBSi-WC60 composite coatings with different vanadium contents were prepared by laser direct deposition on the surface of shield boring machine cutter rings.
7
Layered Microstructure Distribution and Forming Mechanism of Laser-Processed Ni-Fe-B-Si-Nb-C Amorphous Composite Coatings
TL;DR: In this paper, a Ni-based amorphous composite coating was fabricated via laser processing and its microstructure was observed using scanning electron microscopy (SEM) and TEM.
7
High Temperature Oxidation and Wear Resistance of In Situ Synthesized (Ti 3 Al + TiB)/Ti Composites by Laser Cladding
TL;DR: In this paper, the microstructures of the coatings were analyzed; the high temperature wear and oxidation properties of the coating were investigated and compared with Ti6Al4V under the same experimental parameters.
7
Laser Melting Deposition of CP-Ti/Ti–0.4Ni Graded Material for Structural Applications
TL;DR: In this article, microstructural evolution and strengthening of commercial purity Ti (CP-Ti)/Ti 0.4Ni graded material (GM) fabricated by laser melting deposition (LMD) is elucidated.
6
Microstructure and Toughness of Simulated Heat-Affected Zone of Laser Welded Joint for 960 MPa Grade High Strength Steel
TL;DR: In this article, the microstructure and toughness of coarse grain zone (CGZ) and mixed grain zones (MGZ) were investigated by thermal simulation with a Gleeble-3500 thermal simulator.
6