In this letter, a simple method for miniaturized dual-band bandpass filters (BPFs) through E-shaped slotlines has been proposed. The slotlines are etched on the edge sides of the substrate-integrated waveguide (SIW) cavities coupled with magnetic fields of the resonant modes, which makes the proposed cavity operate below its fundamental resonant frequency. Moreover, out-of-band rejection has been improved and the center frequencies of the passbands would be flexibly controlled. To prove the feasibility of the above method, a dual-band BPF based on two SIW cavities operating at 3.6 and 6.4 GHz has been realized. In addition, another dual-frequency filter with only one SIW cavity has been designed, where both the slotlines and the SIW cavity are regarded as resonators. They have been fabricated on a single layer and the test results are in good agreement with the simulations.

Miniaturized Dual-Band SIW Filters Using E-Shaped Slotlines With Controllable Center Frequencies

A compact on-chip dual-band bandpass filter (BPF) at millimeter-wave frequencies is proposed in 0.15-<inline-formula> <tex-math notation="LaTeX">${\mu }\text{m}$ </tex-math></inline-formula> GaAs technology. To understand the working mechanism of the BPF, an LC equivalent circuit model is presented and analyzed for position estimation of the transmission zeros and poles. For demonstration, an on-chip BPF example is fabricated and tested, whose simulation and measurement are in good agreement. There are two frequency bands at 60.2 and 79.7 GHz with bandwidths of 9% and 6.8%, respectively. The chip, excluding the feedings, is only 0.304 mm <inline-formula> <tex-math notation="LaTeX">$\times0.464$ </tex-math></inline-formula> mm.

/pdf/compact-millimeter-wave-on-chip-dual-band-bandpass-filter-in-3cg7llip.pdf

Compact Millimeter-Wave On-Chip Dual-Band Bandpass Filter in 0.15-μm GaAs Technology

This paper presents the numerical and experimental results of a miniaturized half‐mode substrate integrated waveguide HMSIW C‐band pass filter with defected ground structure DGS, using two slots and dumbbell shape defected ground structure. These two slots which are etched on the upper plane of the SIW cavity are used to constitute a multiple‐mode resonator, and the dumbbell‐shape fractal DGS etched on the bottom plane can considerably enhance the filter's performances. The manufactured band‐pass filter in half mode based on SIW technology has a size nearly half of that of a normal filter. The measurements results obtained by CST in C‐band show that the manufactured filter has a large transmitted bandwidth of about 1.53 GHz from 5.97 to 7.5 GHz. The higher measured insertion is about −2.6 dB and the lower return loss measured is about −34 dB. The size of filter design achieved is 7.48 × 38.12 mm2 which make it the more compact in comparison with some published works at the C‐band frequency.

Miniaturized half‐mode SIW band‐pass filter design integrating dumbbell DGS cells

This paper reports on a study of substrate integrated waveguides integrated with gap-coupled (capacitive) excitation to design multipole multiband bandpass filters (BPFs). Waveguide structures are conventionally coupled using inductive aperture to realize a BPF. The capacitive gap-coupled structure is proposed as an alternative for the conventional inductive aperture-coupled ones. It is shown that the proposed structure could operate at the frequencies considerably below the cutoff frequency of the waveguide. Therefore, the filters designed by this technique can be considered as evanescent-mode filters, resulting in a significant size reduction. Moreover, the dual-pole and dual-resonance evanescent-mode BPFs are demonstrated by integrating the new and the conventional evanescent-mode resonators. It is shown that the proposed capacitive excitation enables significant miniaturization and resonates at a small fraction of a 3-D structure cutoff frequency. The proposed integration is analytically discussed using lumped element equivalent circuit accompanied by experimental verification.

Gap-Coupled Excitation for Evanescent-Mode Substrate Integrated Waveguide Filters

/pdf/slotted-folded-substrate-integrated-waveguide-band-pass-2a1zlxzhlc.pdf

Slotted Folded Substrate Integrated Waveguide Band Pass Filter with Enhanced Bandwidth for Ku/k Band Applications

A millimeter-wave dual-band bandpass filter using substrate integrated waveguide (SIW) dual-mode cavities is proposed in this paper. The proposed filter consists of three SIW cavities, and each cavity can provide two resonant modes, the TE201 mode and TE102 mode, as well as a transmission zero. The resonant frequencies of TE201 and TE102 modes can be adjusted by the length and width of the SIW cavity, respectively. And the transmission zero can be adjusted by the location of the coupling window between the SIW cavity and the positions of the input and output ports. An example dual-band bandpass filter is designed, and the center frequencies of the two passbands are 26.73GHz and 31.52GHz, respectively. The 3dB-passbands are 26.24–27.21GHz (3.6%) and 31.2–31.84GHz (2%), respectively, with maximum insertion loss of 0.48dB and 0.67dB, respectively, and return loss larger than 12dB in both pass-bands.

Design of a millimeter-wave dual-band bandpass filter using SIW dual-mode cavities

A millimeter-wave (mmW) wideband band-pass filter (WBF) is proposed and designed by using novel-slotted unites etched on the metal planes of SIW cavities in this paper. The novel-slotted SIW cavity consists of two pairs of same size dumbbell slots etched on both the top and bottom metal planes of the SIW, which acts as a shunt resonator. And there is 90-degree angle rotated between the novel-slotted unites on top and bottom planes. The novel-slotted SIW unit can be used to control the transmission zero and the cutoff frequency at upside. Finally, a five-order millimeter-wave wideband band-pass filter is proposed and fabricated. The measured results show that the filter achieves insertion loss of −1.54 dB at 32.5 GHz, return loss of better than 12.5dB and 3dB fractional bandwidth (FBW) of 34.6%. A good agreement between simulated and measured results verifies the validity of this design methodology. © 2016 Wiley Periodicals, Inc. Microwave Opt Technol Lett 58:2406–2410, 2016

Design of a millimeter‐wave wideband bandpass filter with novel‐slotted substrate integrated waveguide

In this paper, a millimeter-wave wideband bandpass filter is proposed and designed by using novel slotted substrate integrated waveguide (SIW) units. The unit consists of two pairs of same size dumbbell slots etched on both the top and bottom metal planes of the SIW. The slots act as shunt resonators, which reduce the filter size and produce transmission zeros simultaneously. A five-order bandpass with a center frequency of 32.5 GHz and a 3dB fractional bandwidth of 34.6% is developed, and it is small in size, and low loss with a measured insertion loss of 1.54 dB at the center frequency.

Millimeter-wave wideband bandpass filter using novel slotted substrate integrated waveguide

A five-pole ultra-wideband (UWB) bandpass filter (BPF) with broad stopband for FCC UWB indoor communication application is developed. It employs a step-impedance stub-loaded tri-mode resonator, by properly selecting the impedance ratio of the stub, the proposed resonator is able to be downsized without changing significantly its tri-mode characteristics. The advantages of such resonator are easy control of its frequency response and highly compact in structure compared with other resonators. Moreover, a lowpass filter (LPF) is utilized to suppress the unwanted highfrequency harmonics of the proposed UWB BPF. Design and synthesis procedures with details are provided, and good agreement between simulated and measured results is also observed. Due to the fact that the introduced filter structure is simple and all the geometrical parameters are larger than 0.1mm, the UWB BPF is feasible for low-cost fabrication using conventional printed circuit fabricating techniques.

A compact utral-wideband bandpass filter with broad stopband based on step-impedance stub-loaded tri-mode resonator

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Yuhong He

Author Tools

Chat about Author

Papers

Design of a millimeter-wave dual-band bandpass filter using SIW dual-mode cavities

Design of a millimeter‐wave wideband bandpass filter with novel‐slotted substrate integrated waveguide

Millimeter-wave wideband bandpass filter using novel slotted substrate integrated waveguide

A compact utral-wideband bandpass filter with broad stopband based on step-impedance stub-loaded tri-mode resonator