Multilevel converters have been under research and development for more than three decades and have found successful industrial application. However, this is still a technology under development, and many new contributions and new commercial topologies have been reported in the last few years. The aim of this paper is to group and review these recent contributions, in order to establish the current state of the art and trends of the technology, to provide readers with a comprehensive and insightful review of where multilevel converter technology stands and is heading. This paper first presents a brief overview of well-established multilevel converters strongly oriented to their current state in industrial applications to then center the discussion on the new converters that have made their way into the industry. In addition, new promising topologies are discussed. Recent advances made in modulation and control of multilevel converters are also addressed. A great part of this paper is devoted to show nontraditional applications powered by multilevel converters and how multilevel converters are becoming an enabling technology in many industrial sectors. Finally, some future trends and challenges in the further development of this technology are discussed to motivate future contributions that address open problems and explore new possibilities.

/pdf/recent-advances-and-industrial-applications-of-multilevel-26fluutoc9.pdf

Recent Advances and Industrial Applications of Multilevel Converters

An efficiency-optimized modulation scheme and design method are developed for an existing hardware prototype of a bidirectional dual active bridge (DAB) dc/dc converter. The DAB being considered is used for an automotive application and is made up of a high-voltage port with port voltage V1, 240 V ≤ V1 ≤ 450 V, and a low-voltage port with port voltage V2, 11 V ≤ V2 ≤ 16 V; the rated output power is 2 kW. A much increased converter efficiency is achieved with the methods detailed in this paper: The average efficiency, calculated for different voltages V1 and V2, different power levels, and both directions of power transfer, rises from 89.6% (conventional phase shift modulation) to 93.5% (proposed modulation scheme). Measured efficiency values, obtained from the DAB hardware prototype, are used to verify the theoretical results.

Efficiency-Optimized High-Current Dual Active Bridge Converter for Automotive Applications

One of the most important research topics in drive train topologies applied to electric/hybrid vehicles is the efficiency analysis of the power train components, including the global drive efficiency. In this paper, two basic traction electric drive systems of electric/hybrid vehicles are presented and evaluated, with a special focus on the efficiency analysis. The first topology comprises a traditional pulsewidth-modulation (PWM) battery-powered inverter, whereas in the second topology, the battery is connected to a bidirectional dc-dc converter, which supplies the inverter. Furthermore, a variable-voltage control technique applied to this second topology is presented, which allows for the improvement of the drive overall performance. Some simulation results are presented, considering both topologies and a permanent-magnet synchronous motor (PMSM). An even more detailed analysis is performed through the experimental validation. Particular attention is given to the evaluation of the main drive components efficiency, including the global drive efficiency, presented in the form of efficiency maps. Other parameters such as motor voltage distortion and power factor are also considered. In addition, the comparison of the two topologies takes into account the drive operation under the motoring and regenerative-braking modes.

Efficiency Analysis of Drive Train Topologies Applied to Electric/Hybrid Vehicles

This paper introduces a novel modular multilevel series/parallel converter that allows switching modules dynamically not only in series, as in the traditional modular multilevel converter (M2C), but also in parallel. As in M2C, the semiconductor voltages do not exceed the module capacitor voltage for any module state. While the new topology is a generalization of M2C and could, therefore, be operated identically to it, the additional states provide degrees of freedom that the controller can dynamically employ to achieve several advantages. Whereas in M2C many modules are bypassed if the instantaneous converter voltage is lower than the system's peak voltage, the parallel connectivity enables these modules to contribute to the current load, thus reducing conduction losses. In addition, the parallel configuration of modules can be used for balancing the modules' state of charge (SOC). The parallelization losses are moderate or negligible, dependent on the switching rate. Since the parallel connection of capacitors can ensure balancing, it enables stable operation of a multilevel converter without the need for monitoring the module SOCs. While such economical control hardware may be appropriate for low-power systems, we also present more sophisticated control that uses the additional degrees of freedom to minimize losses. Finally, we point to further extensions of the circuit topology to multipole module connectivity that could enable additional functionality and applications.

Modular Multilevel Converter With Series and Parallel Module Connectivity: Topology and Control

This paper presents an alternative to the traditional dc-dc converter interfacing the battery with the inverter dc bus in plug-in hybrid electric vehicle (HEV) traction drives. The boost converter used in commercial HEVs meets with obstacles when it comes to upgrading the power rating and achieving high efficiency while downsizing the converter. A four-level flying-capacitor dc-dc converter is explored that can overcome these drawbacks by dramatically reducing the inductance requirement. A special case of the four-level converter, the 3X dc-dc converter, operates at three discrete output/input voltage ratios, thus further reducing the inductance requirement to a minimal value (almost zero). When further compared to its switched-capacitor dc-dc converter counterparts, the 3X dc-dc converter can be operated at variable output/input voltage ratios without sacrificing efficiency, and it lowers the capacitance requirement by utilizing the parasitic inductance. The operating principle, current ripple analysis, the transient control to limit the inrush current, and power loss analysis are introduced. Experimental results of a 55-kW prototype are provided to demonstrate the principle and analysis of this topology.

55-kW Variable 3X DC-DC Converter for Plug-in Hybrid Electric Vehicles

This paper presents the various configurations of a multilevel modular capacitor-clamped converter (MMCCC), and it reveals many useful and new formations of the original MMCCC for transferring power in either an isolated or nonisolated manner. The various features of the original MMCCC circuit are best suited for a multibus system in future plug-in hybrid or fuel-cell-powered vehicles' drive train. The original MMCCC is capable of bidirectional power transfer using multilevel modular structure with capacitor-clamped topology. It has a nonisolated structure, and it offers very high efficiency even at partial loads. This circuit was modified to integrate single or multiple high-frequency transformers by using the intermediate voltage nodes of the converter. On the other hand, a special formation of the MMCCC can exhibit dc outputs offering limited isolation without using any isolation transformer. This modified version can produce a high conversion ratio from a limited number of components and has several useful applications in providing power to multiple low-voltage loads in a hybrid or electric automobile. This paper will investigate the origin of generating ac outputs from the MMCCC and shows how the transformer-free version can be modified to create limited isolation from the circuit. In addition, this paper will compare various modified forms of the MMCCC topology with existing dc-dc converter circuits from compactness and component utilization perspectives.

/pdf/hybrid-electric-vehicle-power-management-solutions-based-on-x7hggd5q0y.pdf

Hybrid Electric Vehicle Power Management Solutions Based on Isolated and Nonisolated Configurations of Multilevel Modular Capacitor-Clamped Converter

This paper will present the analytical proof of concept of the multilevel modular capacitor-clamped converter (MMCCC). The quantitative analysis of the charge transfer mechanism among the capacitors of the MMCCC explains the start-up and steady-state voltage balancing. Once these capacitor voltages are found for different time intervals, the start-up and steady-state voltages at various nodes of the MMCCC can be obtained. This analysis provides the necessary proof that explains the stable operation of the converter when a load is connected to the low-voltage side of the circuit. In addition, the analysis also shows how the LV side of the converter is (1/N)th of the HV side excitation when the conversion ratio of the circuit is N. In addition to the analytical and simulation results, experimental results are included to support the analytical proof of concept.

/pdf/start-up-and-dynamic-modeling-of-the-multilevel-modular-5cfyadbogk.pdf

Start-Up and Dynamic Modeling of the Multilevel Modular Capacitor-Clamped Converter

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

W.E. Webb

Author Tools

Chat about Author

Papers

Hybrid Electric Vehicle Power Management Solutions Based on Isolated and Nonisolated Configurations of Multilevel Modular Capacitor-Clamped Converter

Start-Up and Dynamic Modeling of the Multilevel Modular Capacitor-Clamped Converter