Recent research and development has been incredibly successful at advancing the capabilities for vacuum electronic device (VED) sources of powerful terahertz (THz) and near-THz coherent radiation, both CW or average and pulsed. Currently, the VED source portfolio covers over 12 orders of magnitude in power (mW-to-GW) and two orders of magnitude in frequency (from ; 10 THz). Further advances are still possible and anticipated. They will be enabled by improved understanding of fundamental beam-wave interactions, electromagnetic mode competition and mode control, along with research and development of new materials, fabrication methods, cathodes, electron beam alignment and focusing, magnet technologies, THz metrology and advanced, broadband output radiation coupling techniques.

Vacuum Electronic High Power Terahertz Sources

Homeland security and military defense technology considerations have stimulated intense interest in mobile, high power sources of millimeter-wave (mmw) to terahertz (THz) regime electromagnetic radiation, from 0.1 to 10THz. While vacuum electronic sources are a natural choice for high power, the challenges have yet to be completely met for applications including noninvasive sensing of concealed weapons and dangerous agents, high-data-rate communications, high resolution radar, next generation acceleration drivers, and analysis of fluids and condensed matter. The compact size requirements for many of these high frequency sources require miniscule, microfabricated slow wave circuits. This necessitates electron beams with tiny transverse dimensions and potentially very high current densities for adequate gain. Thus, an emerging family of microfabricated, vacuum electronic devices share many of the same plasma physics challenges that are currently confronting “classic” high power microwave (HPM) generators including long-life bright electron beam sources, intense beam transport, parasitic mode excitation, energetic electron interaction with surfaces, and rf air breakdown at output windows. The contemporary plasma physics and other related issues of compact, high power mmw-to-THz sources are compared and contrasted to those of HPM generation, and future research challenges and opportunities are discussed.

Plasma physics and related challenges of millimeter-wave-to-terahertz and high power microwave generationa)

The electron cyclotron maser (ECM) is based on a stimulated cyclotron emission process involving energetic electrons in gyrational motion. It constitutes a cornerstone of relativistic electronics, a discipline that has emerged from our understanding and utilization of relativistic effects for the generation of coherent radiation from free electrons. Over a span of four decades, the ECM has undergone a remarkably successful evolution from basic research to device implementation while continuously being enriched by new physical insights. By delivering unprecedented power levels, ECM-based devices have occupied a unique position in the millimeter and submillimeter regions of the electromagnetic spectrum, and find use in numerous applications such as fusion plasma heating, advanced radars, industrial processing, materials characterization, particle acceleration, and tracking of space objects. This article presents a comprehensive review of the fundamental principles of the ECM and their embodiment in practical devices.

/pdf/the-electron-cyclotron-maser-2tiz6d37qb.pdf

The electron cyclotron maser

This review discusses the present state-of-the-art of passive high-power microwave components for applications in microwave systems for RF plasma generation and heating, plasma diagnostics, plasma and microwave materials processing, spectroscopy, communication, radar ranging and imaging, and for drivers of next generation high-field-gradient electron-positron linear colliders. The paper reports on high-power components for overmoded high-power transmission systems such as smooth-wall waveguides, HE/sub 11/ hybrid mode waveguides and quasi-optical TEM/sub 00/ beam waveguides. These include various types of mode converters, polarizers, cross-section tapers, bends, mode selective filters, pulse compressors, DC-breaks, directional couplers, beam combiners and dividers, vacuum windows, and instruments for mode analysis. Problems of ohmic attenuation and unwanted conversion to parasitic modes are discussed in detail and rules for alignment requirements are given. In the case of waveguide transmission, this review mainly concentrates on circular waveguide components but also deals with rectangular waveguide.

Passive high-power microwave components

This paper presents a review of the experimental achievements related to the development of high-power gyrotron oscillators for long-pulse or CW operation and pulsed gyrotrons for many applications. In addition, this work gives a short overview on the present development status of frequency step-tunable and multi-frequency gyrotrons, coaxial-cavity multi-megawatt gyrotrons, gyrotrons for technological and spectroscopy applications, relativistic gyrotrons, large orbit gyrotrons (LOGs), quasi-optical gyrotrons, fast- and slow-wave cyclotron autoresonance masers (CARMs), gyroklystrons, gyro-TWT amplifiers, gyrotwystron amplifiers, gyro-BWOs, gyro-harmonic converters, gyro-peniotrons, magnicons, free electron masers (FEMs), and dielectric vacuum windows for such high-power mm-wave sources. Gyrotron oscillators (gyromonotrons) are mainly used as high-power millimeter wave sources for electron cyclotron resonance heating (ECRH), electron cyclotron current drive (ECCD), stability control, and diagnostics of magnetically confined plasmas for clean generation of energy by controlled thermonuclear fusion. The maximum pulse length of commercially available 140 GHz, megawatt-class gyrotrons employing synthetic diamond output windows is 30 min (CPI and European KIT-SPC-THALES collaboration). The world record parameters of the European tube are as follows: 0.92 MW output power at 30-min pulse duration, 97.5% Gaussian mode purity, and 44% efficiency, employing a single-stage depressed collector (SDC) for energy recovery. A maximum output power of 1.5 MW in 4.0-s pulses at 45% efficiency was generated with the QST-TOSHIBA (now CANON) 110-GHz gyrotron. The Japan 170-GHz ITER gyrotron achieved 1 MW, 800 s at 55% efficiency and holds the energy world record of 2.88 GJ (0.8 MW, 60 min) and the efficiency record of 57% for tubes with an output power of more than 0.5 MW. The Russian 170-GHz ITER gyrotron obtained 0.99 (1.2) MW with a pulse duration of 1000 (100) s and 53% efficiency. The prototype tube of the European 2-MW, 170-GHz coaxial-cavity gyrotron achieved in short pulses the record power of 2.2 MW at 48% efficiency and 96% Gaussian mode purity. Gyrotrons with pulsed magnet for various short-pulse applications deliver Pout = 210 kW with τ = 20 μs at frequencies up to 670 GHz (η ≅ 20%), Pout = 5.3 kW at 1 THz (η = 6.1%), and Pout = 0.5 kW at 1.3 THz (η = 0.6%). Gyrotron oscillators have also been successfully used in materials processing. Such technological applications require tubes with the following parameters: f > 24 GHz, Pout = 4–50 kW, CW, η > 30%. The CW powers produced by gyroklystrons and FEMs are 10 kW (94 GHz) and 36 W (15 GHz), respectively. The IR FEL at the Thomas Jefferson National Accelerator Facility in the USA obtained a record average power of 14.2 kW at a wavelength of 1.6 μm. The THz FEL (NOVEL) at the Budker Institute of Nuclear Physics in Russia achieved a maximum average power of 0.5 kW at wavelengths 50–240 μm (6.00–1.25 THz).

/pdf/state-of-the-art-of-high-power-gyro-devices-and-free-5avfirj4z9.pdf

State-of-the-Art of High-Power Gyro-Devices and Free Electron Masers

The design of a 1.5-MW, 140-GHz, TE-/sub 28,16/-coaxial cavity gyrotron is presented and results of experimental operation are given. A cavity with a cylindrical outer wall and a radially tapered inner rod with longitudinal corrugations was used. A maximum output power of 1.17 MW has been measured in the design mode with an efficiency of 27.2%. Single-mode operation has been found over a wide range of operating parameters. The experimental values agree well with the results of multimode calculations. Frequency-step tuning has been performed between 115.6 and 164.2 GHz. In particular, an output power of 0.9 MW has ben measured in the TE/sub 25,14/ mode at 123.0 GHz and 1.16 MW in the TE/sub 32,18/ mode at 158.9 GHz. At frequencies its with strong window reflections the parameter range for which stable operation is possible is reduced significantly. In order to obtain results relevant for a technical realization of a continuously operated gyrotron, a tube with a radial radio frequency (RF)-beam output through two output windows and a single-stage depressed collector has been designed and is under fabrication. A two-step mode conversion scheme-TE-/sub 28,16/ to Te/sub +76.2/ to TEM/sub 00/-which generates two narrowly directed (60/spl deg/ at the launcher) output wavebeams has been chosen for a quasioptical (q,o) mode converter system. A conversion efficiency of 94% is expected.

A 1.5-MW, 140-GHz, TE/sub 28,16/-coaxial cavity gyrotron

Development of 170 GHz/1 MW Russian gyrotron for ITER

A 140-GHz, 1.5-MW, TE/sub 28,16/-coaxial cavity gyrotron with a dual RF beam output has been designed, built, and tested. For the first time, the generated RF power has been split into two parts and coupled out through two RF output windows in order to reduce the power loading in the windows. The quasioptical output system is based on a two-step mode conversion scheme. First, the cavity mode TE/sub -28,16/ is converted into its degenerate whispering gallery mode TE/sub +76,2/ using a rippled-wall mode converter. Then, this mode is transformed into two TEM/sub 00/ output wave beams. A maximum rf output power of about 950 kW with an output efficiency of 20% has been measured. According to numerical calculations, an rf power above 1.5 MW is expected to be generated in the cavity. Even if all losses are taken into account, a discrepancy between experiment and calculations remains. The power deficit seems to be partly caused by the influence of the stray radiation captured inside the tube. However, the two main reasons are probably an incomplete mode conversion from TE/sub -28,16/ to TE/sub +76,2/ and a large energy spread of the electron beam due to trapped electrons. An increased amount of captured stray radiation resulted in a reduced stability of operation. A single-stage depressed collector was used successfully, increasing the RF output efficiency from 20% to 29%.

Coaxial cavity gyrotron with dual RF beam output

Cyclotron resonance masers, gyrotrons and gyroklystrons, are dominant high-energy sources at millimeter wavelengths and still have considerable margins of power and efficiency. The present-day challenge of creating CW megawatt gyrotrons is associated with many problems, among which the output window problem is a key one. New results of the investigation of gyrotrons and gyroklystrons in Russia are reported. A state-of-the-art analysis of gyrotrons for plasma heating in fusion installations and technological applications as well as gyroklystrons for millimeter-wavelength radars is performed.

Cyclotron resonance masers: State of the art

In experiments aimed at the development of gyrotrons for electron-cyclotron (EC) plasma heating, output power of 2 MW at a wavelength of 3 mm was attained. The possibility of increase in frequency of millimetre-wave gyrotron operation by transition to higher EC harmonics at a fixed magnetic field by the use of high-selectivity two-resonator cavities is discussed. Outputs of over 100 kW were generated at the second and third harmonics of EC frequency. The results of calculation of pulsed magnetic systems, capable of providing the operation of near millimetre-wave long-pulsed gyrotrons, are given. The principles of increase in efficiency of gyrotrons by means of a depressed two-stage collector of electrons are discussed.

The problems of increase in power, efficiency and frequency of gyrotrons for plasma investigations

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

V.A. Flyagin

Author Tools

Chat about Author