Monosaccharides play significant roles in daily metabolism in living organisms. Although various devices have been constructed for monosaccharide identification, most rely on the specificity of the natural enzyme. Herein, inspired by natural ionic channels, an asymmetrical MOF-in-nanochannel architecture is developed to discriminate monosaccharide enantiomers based on cascade reactions by combining oxidase-mimicking and Fenton-like catalysis in homochiral mesoporous CuMOF pockets. The identification performance is remarkably enhanced by the increased oxidase-mimicking activity of Au nanoparticles under a local surface plasmon resonance (LSPR) excitation. The apparent steady-state kinetic parameters and nano-fluidic simulation indicate that the different affinities induced by Au-LSPR excitation and the confinement effect from MOF pockets precipitate the high chiral sensitivity. This study offers a promising strategy for designing an enantiomer discrimination device and helps to gain insight into the origin of stereoselectivity in a natural enzyme.

/pdf/rational-design-of-mesoporous-chiral-mofs-as-reactive-1oe2r1dx.pdf

Rational design of mesoporous chiral MOFs as reactive pockets in nanochannels for enzyme-free identification of monosaccharide enantiomers

Abstract Enzymes are characteristic of catalytic efficiency and specificity by maneuvering multiple components in concert at a confined nanoscale space. However, achieving such a configuration in artificial catalysts remains challenging. Herein, we report a microenvironment regulation strategy by modifying carbon paper with hexadecyltrimethylammonium cations, delivering electrochemical carbon–carbon coupling of benzaldehyde with enhanced activity and racemate stereoselectivity. The modified electrode–electrolyte interface creates an optimal microenvironment for electrocatalysis—it engenders dipolar interaction with the reaction intermediate, giving a 2.2-fold higher reaction rate (from 0.13 to 0.28 mmol h −1 cm −2 ); Moreover, it repels interfacial water and modulates the conformational specificity of reaction intermediate by facilitating intermolecular hydrogen bonding, affording 2.5-fold higher diastereomeric ratio of racemate to mesomer (from 0.73 to 1.82). We expect that the microenvironment regulation strategy will lead to the advanced design of electrode–electrolyte interface for enhanced activity and (stereo)selectivity that mimics enzymes. 

Electrochemical carbon–carbon coupling with enhanced activity and racemate stereoselectivity by microenvironment regulation

Enantiopure FeII4L4 cages bind steroids stereoselectively

A hyperresponsive tool to assess supramolecular catalysis, the cyclization of di-epoxides into cyclic ethers is used to elucidate the difference between pnictogen-bonding and Lewis acid catalysis systematically. For all stereoisomers, most tested catalysts follow the Baldwin rules. Brønsted acid and anion–π catalysis afford almost only Baldwin products. Lewis acids such as SbCl3, BF3 and BiCl3 give the poorest selectivity, with at least 50 % Baldwin (B) products for all stereoisomers. In clear contrast, optimized pnictogen-bonding catalysts operating on the Sb(III) and the Sb(V) level give the fused anti-Baldwin (A) bicycles as the main product of trans epoxides, independent of syn or anti relation of the two epoxides. In the cis series, Sb(III) pnictogen-bonding catalysts afford BA products almost exclusively for syn diastereomers, while anti diastereomers give equal amounts of BA and AB products. Sb(V) pnictogen-bonding catalysts show similarly special trends. These unique characteristics support that pnictogen-bonding catalysis differs from Lewis acid catalysis and can arguably be defined as its non-covalent counterpart, just like hydrogen-bonding catalysis is understood and appreciated as the non-covalent counterpart of Brønsted acid catalysis. Computational studies on the origin of anti-Baldwin selectivity reveal Sb(V) catalysts with an introvert deep σ hole surrounded by an almost planar ring of ligands. Central pnictogen-bond attraction against peripheral steric repulsion then forces the epoxide to break open. In contrast, transient antimony oxidation in cyclic intermediates accounts for the chemoselectivity of Sb(III) catalysts. Presumably due to insufficient accessibility of their σ holes, the activity of tetrel-bonding catalysts is negligible. The division between powerful pnictogen-bonding and irrelevant tetrel-bonding catalysts does not exist with the respective orthodox Lewis acids and thus supports that σ-hole and Lewis acid catalysis are not the same. 

https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/hlca.202200119

Pnictogen‐Bonding Catalysts, Compared to Tetrel‐Bonding Catalysts:  More Than Just Weak Lewis Acids

Possessing four cationic pyridium groups, phenyl-bridged bis(triphenylamine) derivatives (G1, G2) were encapsulated by cucurbit[8]uril (CB[8]) at a 1:2 stoichiometry to form the network-like organic two-dimensional nanosheet, which could efficiently enhance the near-infrared (NIR) luminescence and companies with a red-shift from 750 to 810 nm for G1. Benefiting from the supramolecular multivalent interaction, α-cyclodextrin modified hyaluronic acid (HACD) and G1/CB[8] formed nanoparticles to further enhance NIR luminescence behaviors. Compared with the short rigid aromatic bridged bis(triphenylamine) derivative (G2), the supramolecular assembly derived from G1 with long flexible cationic arms gives a larger Stokes shift, which further coassembles with the phosphorescent bromophenylpyridinium derivative/CB[8] pseudorotaxane, leading to efficient phosphorescent resonance energy transfer (PRET). Especially, the nanoparticle showed delayed NIR fluorescence under 308 nm light excitation with an ultralarge Stokes shift up to 502 nm, which was successfully applied in targeted NIR cell imaging. 

Aromatic Bridged Bis(triphenylamine) Cascade Assembly Achieved Tunable Nanosupramolecular Morphology and NIR Targeted Cell Imaging.

Enzymes achieve high substrate and product selectivities by orientating and activating the substrate(s) appropriately inside a confined and finely optimized binding pocket. Although some basic aspects of enzymes have already been mimicked successfully with man-made catalysts, substrate activation by proton wires inside enzyme pockets has not been recreated with man-made catalysts so far. A proton wire facilitates the dual activation of a nucleophile and an electrophile via a reciprocal proton transfer, enabling highly stereoselective reactions under mild conditions. Here we present evidence for such an activation mode inside the supramolecular resorcin[4]arene capsule and demonstrate that it enables catalytic and highly β-selective glycosylation reactions—still a major challenge in glycosylation chemistry. Extensive control experiments provide very strong evidence that the reactions take place inside the molecular container. We show that this activation strategy is compatible with a broad scope of glycoside donors and nucleophiles, and is only limited by the cavity size. Proton wires in enzyme active sites enable stereoselective reactions under mild conditions by facilitating dual activation of a nucleophile and an electrophile through reciprocal proton transfer. Now it has been shown that such an activation mode can be mimicked inside a supramolecular capsule, enabling a general approach to β-glycosides. 

/pdf/mimicry-of-the-proton-wire-mechanism-of-enzymes-inside-a-mvucst1d.pdf

Mimicry of the proton wire mechanism of enzymes inside a supramolecular capsule enables β-selective O-glycosylations

The resorcin[4]arene capsule was found to catalyze β-selective furanosylation reactions for a variety of different furanosyl donors: α-d- and α-l-arabinosyl-, α-l-fucosyl-, α-d-ribosyl-, α-d-xylosyl-, and even α-d-lyxosyl fluorides. The scope is only limited by the inherently finite volume inside the closed capsular catalyst. The catalyst is readily available on a multi-100 g scale and can be recycled for at least seven rounds without significant loss in activity, yield, and selectivity. The mechanistic investigations indicated that the furanosylation mechanism is shifted toward an SN1 reaction on the mechanistic continuum between the prototypical SN1 and SN2 substitution types, as compared to the pyranosylation reaction inside the same catalyst. This is especially true for the lyxosyl donor, as indicated by the nucleophile reaction order of 0.26, and supported by metadynamics calculations. The mechanistic shift toward SN1 is of high interest as it indicates that this catalyst not only enables β-selective furanosylations and pyranoslyations independently of the substrate configuration but in addition also independently of the operating mechanism. To our knowledge, there is no alternative catalyst available that displays such properties.

Supramolecular Capsule-Catalyzed Highly β-Selective Furanosylation Independent of the SN1/SN2 Reaction Pathway.

Simple enough to be understood and complex enough to be revealing, cascade cyclizations of diepoxides are introduced as new tools to characterize supramolecular catalysis. Decoded product fingerprints are provided for a consistent set of substrate stereoisomers, and shown to report on chemo-, diastereo- and enantioselectivity, mechanism and even autocatalysis. Application of the new tool to representative supramolecular systems reveals, for instance, that pnictogen-bonding catalysis is not only best in breaking the Baldwin rules but also converts substrate diastereomers into completely different products. Within supramolecular capsules, new cyclic hemiacetals from House–Meinwald rearrangements are identified, and autocatalysis on anion–π catalysts is found to be independent of substrate stereochemistry. Decoded product fingerprints further support that the involved epoxide-opening polyether cascade cyclizations are directional, racemization-free, and interconnected, at least partially. The discovery of unique characteristics for all catalysts tested would not have been possible without decoded cascade cyclization fingerprints, thus validating the existence and significance of privileged platforms to elucidate supramolecular catalysis. Once decoded, cascade cyclization fingerprints are easily and broadly applicable, ready for use in the community.

https://pubs.rsc.org/en/content/articlepdf/2022/sc/d2sc03991e

Decoded fingerprints of hyperresponsive, expanding product space: polyether cascade cyclizations as tools to elucidate supramolecular catalysis

https://www.nature.com/articles/s41557-022-01040-w.pdf

Publisher Correction: Mimicry of the proton wire mechanism of enzymes inside a supramolecular capsule enables β-selective O-glycosylations

Copolymerizations of propylene with ω-alkenols (aluminum-protected 5-hexene-1-ol (AH) and 10-undecene-1-ol (AU)) and non-polar analogues (1-hexene and 1-dodecene) were conducted with a rac-[Me2Si(2-Me-4-Ph-Ind)2]ZrCl2 activated by modified methylaluminoxane. The catalytic system showed high activity for each copolymerization, of which value was independent on the comonomer used and decreased with the increase of the comonomer concentration. The comonomer content of the copolymers obtained also decreased with the increase of the comonomer concentration in each copolymer. The evaluation of the monomer reactivity ratios indicates a preference for the propylene insertion regardless of the last inserted monomer unit in growing polymer chain in all the copolymerizations. The relative reactivity of ω-alkenols was however significantly lower than that of non-polar analogues. These results suggested that the aluminum protection of polar monomer do not affect the activity of copolymerization but significantly decrease the comonomer reactivity.

/pdf/reactivity-comparison-of-o-alkenols-and-higher-1-alkenes-in-2dnwhtzf1b.pdf

Reactivity Comparison of ω-Alkenols and Higher 1-Alkenes in Copolymerization with Propylene Using An Isospecific Zirconocene-MMAO Catalyst

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Tianyou Li

Author Tools

Chat about Author