A technique is described for the measurement of fluid temperatures in microfluidic systems based on temperature-dependent fluorescence. The technique is easy to implement with a standard fluorescence microscope and CCD camera. In addition, the method can be used to measure fluid temperatures with micrometer spatial resolution and millisecond time resolution. The efficacy of the method is demonstrated by measuring temperature distributions resulting from Joule heating in a variety of microfluidic circuits that are electrokinetically pumped. With the equipment used for these measurements, fluid temperatures ranging from room temperature to 90 °C were measured with a precision ranging from 0.03 to 3.5 °Cdependent on the amount of signal averaging done. The spatial and temporal resolutions achieved were 1 μm and 33 ms, respectively.

Temperature measurement in microfluidic systems using a temperature-dependent fluorescent dye.

https://repository.ubn.ru.nl/bitstream/handle/2066/112339/112339.pdf

Res, an expert system for the set-up and interpretation of a ruggedness test in hplc method validation .1. the ruggedness test in hplc method validation

With capillary electrophoresis, buffer pH must be constant to achieve consistent migration times. Irreproducible separations have been attributed to pH changes due to water hydrolysis in the inlet/outlet vials. A method of measuring the pH of the electrolyte on-column is described that uses wavelength-resolved fluorescence detection. C.SNARF-1 is a fluorescent pH indicator that has a large change in fluorescence emission profile depending on pH. When it is incorporated into the running buffer, monitoring the pH-dependent emission spectra of the C.SNARF-1 allows column pH to be calculated. With reduced-volume outlet buffer vials in the nanoliter to low microliter range, significant changes in pH and column conductivity are measured during a single electrophoretic run, with pH fronts greater than 3 units passing a fixed point on the capillary over a several second period. These changes appear to be caused by reverse-migrating OH- produced at the capillary outlet by the hydrolysis of water.

Dynamic on-column pH monitoring in capillary electrophoresis : Application to volume-limited outlet vials

An interpretive optimization procedure in which pH can be one of the variables is presented with the emphasis on optimizing separations. When varying the pH in reversed-phase liquid chromatography the retention of ionogenic solutes will change. Thus, the selectivity between ionogenic and neutral solutes or between ionogenic solutes mutually can be optimized. However, pH also greatly affects the efficiency (plate count) and peak shape (asymmetry). Optimum selectivity (i.e. large differences in retention times) may be observed under conditions where peaks are broad and asymmetrical. Thus, it is essential to simultaneously consider retention, peak width and peak shape and their effects on separation (effective resolution) in pH-optimization studies. A procedure in which this is done is presented and applied to optimizing the separation of a synthetic mixture of selected pharmaceuticals. After initial experiments to establish the parameter space (boundaries for pH and binary methanol — water composition), twelve experiments are performed according to a 3×4 experimental design. At each loaction the retention, peak height, peak area and peak symmetry are recorded for each solute. These data are then used to build models for each of the four characteristics and for each solute. From this set of models the response surface, describing the quality of separation as a function of pH and composition, can be calculated. A variety of optimization criteria (quantifying quality of separation) can be used. The optimum corresponds to the highest point on the response surface.

Optimizing separations in reversed-phase liquid chromatography by varying pH and solvent composition

Gradien elution methods for predicting isocratic conditions

Given the mobile and the stationary phase and values for the physical parameters such as temperature and pH, a separation can be optimized by varying the so-calledchromatographic parameters. These include the column dimensions, particle size, operating conditions (e.g. flow rate, attenuation) and instrumentation (e.g. detector cell, time constant). Optimization of the chromatographic parameters implies finding the best possible set of values, which we define as yielding (i) sufficient separation and (ii) sufficient sensitivity in (iii) the shortest possible time. Finding the best possible conditions (the global optimum) is very difficult for chromatographers in practice.

An expert system for the optimization of columns, operating conditions and instrumentation for high-pressure liquid chromatography

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Th. Blaffert

Author Tools

Chat about Author

Papers

An expert system for the optimization of columns, operating conditions and instrumentation for high-pressure liquid chromatography