Emerged in the middle of 20th century, composite materials are now one of the hotspot research topics in the modern technology. Their promising characteristics make them suitable for enormous applications in industrial field such as aerospace, automotive, construction, sports, bio-medical and many others. These materials reveal remarkable structural and mechanical properties such as high strength to weight ratio, resistance to chemicals, fire, corrosion and wear; being economical to manufacture. Herein, an overview of composite materials, their characterization, classification and main advantages linked to physical and mechanical properties based on the recent studies are presented. There, were presented the conventional manufacturing techniques of composite and their applications. It was highlighted the tremendous need to discovery new generation of composites that should incorporate the synthetic or natural materials by implementing new efficient manufacturing processes. In the combination of matrix and reinforcement materials, the use of natural materials as constituent are compulsory in order to obtain a complete material degradable as environmentally friendly.

Recent progress of reinforcement materials: a comprehensive overview of composite materials

Bamboo fibers demonstrate enormous potential as the reinforcement phase in composite materials. In this study, in order to find suitable NaOH concentration for bamboo fiber treatment, bamboo fibers were treated with 2 wt.%, 6 wt.% and 10 wt.% NaOH solutions for 12 h, respectively. We determined that 6 wt.% NaOH treated bamboo fibers were optimal for the fabrication of bamboo fiber composites by single fiber tensile test, single fiber pull-out test, Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The short length bamboo fibers treated with 6 wt.% NaOH solutions were well dispersed in the epoxy matrix by a new preparation method. The effect of fiber content and fiber length on the mechanical behavior of bamboo fiber reinforced epoxy composites was investigated. The results confirmed that fracture toughness and flexural modulus of the composites monotonically increased with fiber length and content. However, for all samples, composites showed negligible difference on the flexural strength. The fracture surfaces of the composites were observed by SEM, revealing that fiber breakage, matrix cracking, debonding, and fiber pull out were major failure types. In addition, thermogravimetric analysis (TGA) was carried out to investigate the thermal behavior of both bamboo fibers and composites.

Thermal and Mechanical Properties of Bamboo Fiber Reinforced Epoxy Composites.

This paper presents the thermal and mechanical properties of bamboo fiber reinforced composite (BFRC) derived from Gigantochloa scortechinii. The bamboo fibers were prepared through chemical treatment by sodium hydroxide (NaOH) followed by physical milling method. The thermal characteristics of the bamboo fiber and its polymer composite were analysed using a thermogravimetric analysis and differential scanning calorimetric. The functional groups and crystallinity of the fiber were analysed with Fourier transform infrared and x-ray diffraction spectroscopy. Meanwhile, the fiber morphology was examined using a scanning electron microscope. The BFRCs with fiber volume fractions ranging from 0 % to 40 % embedded in three thermoset resins (epoxy, polyester, vinyl ester) were subjected to tensile and flexural tests and the fracture pattern was examined. The NaOH concentration of 10 % with soaking duration of 48 h was found to produce a bamboo fiber with the highest ultimate tensile and modulus strength. The tensile and flexural properties of all the BFRCs were found to be directly proportional to the fiber volume fractions. It was found that the bamboo fiber reinforced epoxy composite (BFREC) with 40 % fiber volume fraction exhibited the highest tensile and flexural strength compared to polyester and vinyl ester composites. The method of bamboo fiber composite preparation in this work may serve as a useful guide to produce a strong BFRC for external strengthening of buildings and structures.

Thermal and mechanical properties of bamboo fiber reinforced composites

Biocomposite materials manufactured from natural fibres and polymer matrix represent a group of engineered composite products with diverse applications. These materials continue to find increasing applications due to their design flexibility, superior properties and aesthetic appeal. The applicability of these biocomposites, however, depends on the interaction in the fibre-matrix interface. This paper reviews the state of the art research in fibre-matrix interfacial interaction based on published literature. A brief background on biocomposite materials is presented. The focus of this review is the modification of natural fibres and its effect on fibre-matrix interfacial adhesion and properties. In addition, the effect of chemical treatment on fibre composition and fibre-matrix interfacial bonding mechanism are discussed.

https://link.springer.com/content/pdf/10.1007/s12221-020-9362-5.pdf

Natural Fibre Modification and Its Influence on Fibre-matrix Interfacial Properties in Biocomposite Materials

https://www.techscience.com/jrm/v10n3/44737/pdf

A Review of Recent Advances in Hybrid Natural Fiber Reinforced Polymer Composites

In this study, polylactide acid (PLA) is filled with bamboo fibers (BFs) to fabricate a biodegradable natural composite for industrial applications. The influence of pre-treatment of BFs using 4 wt % sodium hydroxide (NaOH) solution at room temperature for 1 h on thermal and mechanical properties of resultant composites is systematically investigated. Differential scanning calorimetry and thermogravimetric analysis demonstrate that the incorporation of treated BFs promotes higher glass transition and crystallization temperatures of the resultant composites relative to untreated fiber composites, whereas alkali treatment results in superior thermal stability. Furthermore, the fracture surfaces are characterized by scanning electron microscopy. The changes in morphology reveal the possible dissolution of hemicellulose and lignin by alkalization with NaOH, indicative of an improved interfacial adhesion. An increment in the tensile strength of composites is achieved through the reinforcement with treated fibers. However, a lower tensile modulus is found for composites reinforced with chemically modified BFs, which might be due to the partial conversion of cellulose I into II. The results highlight that the use of BFs could be a feasible candidate as reinforcements for the development of biodegradable composites.

Thermo-Mechanical Performance of Polylactide Composites Reinforced with Alkali-Treated Bamboo Fibers

In this work, bamboo fibers are chemically modified with NaOH solution of 1, 4, and 7 wt% concentrations at room temperature, respectively, and subsequently the untreated and treated fibers are prepared with epoxy resin for unidirectional composites by hot pressing molding technique. Tensile and micro-bond tests are conducted on the composite specimens to obtain mechanical properties, such as tensile strength and modulus, elongation at break, and interfacial strength. Besides, scanning electron microscopy (SEM) is employed to perform morphological observations for constituent damages. In addition, the influence of alkali concentration on the thermal performance of epoxy-based composites is examined by using differential scanning calorimetry (DSC) and thermogravimetric (TG) analysis. It is found that composite tensile strength reaches the maximum when the alkali concentration is 4%, increased by 45.24% compared with untreated composites. The composite elongation at break increases on increasing the concentration. Inversely, the composite modulus decreases as the concentration increases. Besides, the results demonstrate that the chemical treatment on the fiber surface could improve interface adhesion, as observed from its topography by SEM. Micro-bond test reveals that there is maximum interfacial shear strength when the alkali concentration is 4%, which increases by 100.30% in comparison with the untreated samples. In case of thermal properties, the DSC analysis indicates that the glass transition temperature is maximized at 4% alkali concentration, which is increased by 12.95%, compared to those from unmodified fibers. In addition, TG results show that the 4% concentration also facilitates thermal stability improvement, indicative of superior interfacial bonding.

https://www.mdpi.com/1420-3049/24/15/2682/pdf

Effect of Fiber Surface Modification on the Interfacial Adhesion and Thermo-Mechanical Performance of Unidirectional Epoxy-Based Composites Reinforced with Bamboo Fibers

Effect of fiber volume fraction on the thermal and mechanical behavior of polylactide‐based composites incorporating bamboo fibers

The present study is committed to exploring the intergranular crack performance of magnesium (Mg) bicrystals with typical twin boundaries (TBs) by molecular dynamics simulations coupled with finite element method. Atomic modeling is conducted to determine the traction–separation (T–S) law in a cohesive zone. Importantly, the T–S curves together with microstructure evolutions are employed to investigate the plastic response during crack propagating. Afterwards, the obtained T–S parameters are embedded into cohesive elements along grain boundaries of polycrystalline structure, which is efficiently characterized by the Voronoi tessellation. As consequence, the simulation of intergranular fracture in Mg bicrystal is successfully realized by finite element analysis with failure criteria. Eventually, the critical stress intensity factors of compact tension specimens with various TBs are predicted availably. The results demonstrate that the crack propagation is strongly sensitive to twin boundary and resultant plastic deformation behavior at the crack tip. Moreover, it is found that microcracks are produced when TBs interact with dislocations. A comparison between simulated results and published experimental data is provided to highlight the reliability of the multiscale method for studying the cracking performance. 

Plastic deformation response during crack propagation in Mg bicrystals with twin boundaries

Thermal and mechanical performance of unidirectional composites from bamboo fibers with varying volume fractions

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Siyan Ran

Author Tools

Chat about Author