Background To describe antibiotic prescribing behaviors in dentistry, including clinical and nonclinical indications for their use, the type and regimen of antibiotics prescribed, and factors influencing their prescription, the authors conducted a scoping review. Types of Studies Reviewed The authors conducted a scoping review of published literature by searching multiple databases. Key search terms included dentist, antibiotic, antimicrobial, antibacterial, prophylaxis, prescription, pattern, habit, knowledge, and practice. Two authors independently reviewed titles and abstracts by using detailed eligibility criteria. The authors placed no restrictions on study design or publication year. The authors qualitatively assessed studies by using a modified version of the Center for Evidence-Based Management’s critical appraisal of a survey checklist. Results The authors identified 1,912 studies but considered only 118 studies eligible for review. Most included studies were either cross-sectional surveys (81 studies) or prescription audits (25 studies) from various geographic locations. Publication dates ranged from 1982 through 2017. The authors examined prophylactic and therapeutic antibiotic use in 48 and 29 studies, respectively. Another 29 studies examined the use of both prophylactic and therapeutic antibiotics in dentistry. Overall, dentists prescribed a wide variety of antibiotic regimens for various clinical and nonclinical indications. Dentists have acquired their prescribing knowledge from a variety of sources and have changed their antibiotic prescribing practices throughout their careers for various reasons. Conclusions and Practical Implications Considering the seriousness of antibiotic resistance, the authors highlight trends in antibiotic prescribing practices, characterize factors contributing to the use and misuse of antibiotics in dentistry, provide insight into the importance of antibiotic stewardship in the oral health setting, and encourage dentists to reflect on their antibiotic prescription practices.

The use and misuse of antibiotics in dentistry: A scoping review

Oral ulcers have periodicity and recurrence, and the etiology and causative mechanisms remain unclear; therefore, it is difficult to treat oral ulcers effectively. Current clinical treatment methods mainly include pain relief and administration of anti-inflammatories to prevent secondary infections and a prolonged recurrence cycle. However, these traditional treatment methods are administered independently and are susceptible to muscle movements and constant salivary secretion in the mouth, resulting in ineffective drug functioning. Therefore, development of a novel treatment to reduce wound infection and accelerate wound healing for oral ulcers is required for effective treatment. Herein, we report a multifunctional polysaccharide composite microneedle patch based on hyaluronic acid (HA) and hydroxypropyl trimethyl ammonium chloride chitosan (HACC) loaded with dexamethasone (DXMS) and basic fibroblast growth factor (bFGF) for oral ulcer healing. DXMS and bFGF encapsulated the HA tip portion of the microneedle patch, endowing the microneedle patches with anti-inflammatory and angiogenic properties. HACC was applied to the back of the microneedle patch, adding antibacterial properties. The experimental results indicated that the prepared dressings exhibited good antibacterial activity and effectively promoted cell migration growth and angiogenesis. More importantly, animal experiments have shown that multifunctional microneedle patches can effectively promote oral ulcer healing. Thus, these novel multifunctional polysaccharide composite microneedle patches have great potential for oral ulcers treatment. 

Multifunctional polysaccharide composited microneedle for oral ulcers healing.

Wounds are a stern healthcare concern in the growth of chronic disease conditions as they can increase healthcare costs and complicate internal and external health. Advancements in the current and newer management systems for wound healing should be in place to counter the health burden of wounds. Researchers discovered that two-dimensional (2D) media lacks appropriate real-life detection of cellular matter as these have highly complicated and diverse structures, compositions, and interactions. Hence, innovation towards three-dimensional (3D) media is called to conquer the high-level assessment and characterization in vivo using new technologies. The application of modern wound dressings prepared from a degenerated natural tissue, biodegradable biopolymer, synthetic polymer, or a composite of these materials in wound healing is currently an area of innovation in tissue regeneration medicine. Moreover, the integration of 3D printing and nanomaterial science is a promising approach with the potential for individualized, flexible, and precise technology for wound care approaches. This review encompasses the outcomes of various investigations on recent advances in 3D-printed drug-loaded natural, synthetic, and composite nanomaterials for wound healing. The challenges associated with their fabrication, clinical application progress, and future perspectives are also addressed. 

3D printed drug loaded nanomaterials for wound healing applications

https://www.e-asct.org/journal/download_pdf.php?doi=10.5757/ASCT.2023.32.1.1

Application of 3D Bioprinting Technology for Tissue Regeneration, Drug Evaluation, and Drug Delivery

Medication-related osteonecrosis of the jaw (MRONJ) is a relatively common pathology occurring in around 5% of patients taking bisphosphate and other antiresorptive or anti-angiogenic medications. Despite the efforts, as of today there is still no consensus on its management. In this case report, the successful management of stage II MRONJ was performed for an eighty-three-year-old female patient suffering from pain and alteration in her normal oral functions (swallowing and phonation). The treatment consisted of three sessions of photobiomodulation therapy (PBM), followed by minimal surgical intervention and three other sessions of PBM. PBM was applied on the sites of osteonecrosis with the follow parameters: 4 J/cm2; a power of 50 mW; 8 mm applicator diameter; a continuous contact mode. Irradiation was performed on three points, including the vestibular, occlusal and lingual parts of each of the bone exposure areas. Each point was irradiated for 40 s, and, in total, nine points were made per session, and nine sessions were conducted. To assess the pain, a visual analogue scale was used in which zero represented no pain at all and ten represented the greatest pain. At the first session and before any intervention, the patient stated that her pain was 8 out of 10. At the end of the treatment, a significant reduction in VAS was noted (2/10) and, clinically, a healing of the soft tissue in the previously exposed bone was observed. This case report suggests that the combination of PBM with surgical intervention is promising in the management of MRONJ.

/pdf/management-of-medication-related-osteonecrosis-of-the-jaw-2m1xhscz.pdf

Management of Medication-Related Osteonecrosis of the Jaw with Photobiomodulation and Minimal Surgical Intervention

This study aimed to evaluate the complementarity of surgical therapy, photobiomodulation (PBM), advanced platelet-rich fibrin (A-PRF), and Leukocyte and platelet-rich fibrin (L-PRF) for the management of medication-related osteonecrosis of the jaw (MRONJ).Sixty rats underwent injection of zoledronate followed by left mandibular first and second molar extractions to induce MRONJ lesions. All rats were examined for the signs of MRONJ 8 weeks post-dental extraction. Forty-nine rats with positive signs of MRONJ were appointed to seven different groups as follows: control (Ctrl); surgery alone (Surg); surgery and PBM (Surg + PBM); surgery and A-PRF insertion (Surg + APRF); surgery and L-PRF insertion (Surg + LPRF); surgery, A-PRF insertion, and PBM (Surg + APRF + PBM); surgery, L-PRF insertion, and PBM (Surg + LPRF + PBM). Euthanasia was carried out 30 days after the last treatment session. The lesions' healing was evaluated clinically, histologically, and radiographically. Data were analyzed using STATA software version 14, and the statistical significance level was set at 5% for all cases.According to the present study, A-PRF and L-PRF treatment resulted in significant improvements in clinical, histological, and radiographical parameters compared to the Ctrl group (P < 0.05). The PBM also decreased wound dimensions and the number of empty lacunae compared to the Ctrl group (P < 0.05). Surg + APRF + PBM and Surg + LPRF + PBM were the only groups that presented a significantly higher mean number of osteocytes (P < 0.05). No significant differences were observed between A-PRF and L-PRF treatment groups (P > 0.05).Surgical resection followed by applying A-PRF or L-PRF reinforced by PBM showed optimal wound healing and bone regeneration in MRONJ lesions. 

/pdf/complementarity-of-surgical-therapy-photobiomodulation-a-prf-3vayybde.pdf

Complementarity of surgical therapy, photobiomodulation, A-PRF and L-PRF for management of medication-related osteonecrosis of the jaw (MRONJ): an animal study

Oral squamous cell carcinoma (OSCC) is the most prevalent head and neck malignancy, with frequent cervical lymph-node metastasis, leading to a poor prognosis in OSCC patients. The present study aimed to identify potential markers, including microRNAs (miRNAs) and genes, significantly involved in the etiology of early-stage OSCC. Additionally, the main OSCC's dysregulated Gene Ontology annotations and significant signaling pathways were identified. The dataset GSE45238 underwent multivariate statistical analysis in order to distinguish primary OSCC tissues from healthy oral epithelium. Differentially expressed miRNAs (DEMs) with the criteria of p-value < 0.001 and |Log2 fold change| > 1.585 were identified in the two groups, and subsequently, validated targets of DEMs were identified. A protein interaction map was constructed, hub genes were identified, significant modules within the network were illustrated, and significant pathways and biological processes associated with the clusters were demonstrated. Using the GEPI2 database, the hub genes' predictive function was assessed. Compared to the healthy controls, main OSCC had a total of 23 DEMs. In patients with head and neck squamous cell carcinoma (HNSCC), upregulation of CALM1, CYCS, THBS1, MYC, GATA6, and SPRED3 was strongly associated with a poor prognosis. In HNSCC patients, overexpression of PIK3R3, GIGYF1, and BCL2L11 was substantially correlated with a good prognosis. Besides, “proteoglycans in cancer” was the most significant pathway enriched in the primary OSCC. The present study results revealed more possible mechanisms mediating primary OSCC and may be useful in the prognosis of the patients with early-stage OSCC.

/pdf/pathogenesis-and-prognosis-of-primary-oral-squamous-cell-39pbyx8i.pdf

Pathogenesis and prognosis of primary oral squamous cell carcinoma based on microRNAs target genes: a systems biology approach

3D-printed bi-layered polymer/hydrogel construct for interfacial tissue regeneration in a canine model.

Background
The role of the basic fibroblast growth factor (bFGF) has well known in the angiogenesis and ulcer healing. In this study, we aimed to evaluate the effects of bFGF on tissue repair in a rat oral mucosal wound.


Methods
Musosal wound induced on the lip mucosa of rats and bFGF was injected along the edge of the mucosal defect immediately after surgery. The tissues were collected on days 3, 7 and 14 after the wound induction. The micro vessel density (MVD) and CD34 expression were done by histochemical studies.


Results
The bFGF significantly accelerated granulation tissue formation and MVD was increased three days after ulcer induction but decreased 14 days after surgery. The MVD was significantly higher in the bFGF-treated group. The wound area was decreased in all groups time-dependently and a statistically significant difference (p value?) was observed between the bFGF-treated group and untreated group. The wound area was smaller in the bFGF-treated group compared to the untreated group.


Conclusions
Our data demonstrated that bFGF can accelerated and facilitated wound healing.

/pdf/the-bfgf-can-improve-angiogenesis-in-oral-mucosa-and-30w28xi8.pdf

The bFGF Can Improve Angiogenesis in Oral Mucosa and Accelerate Wound Healing.

Objectives: The current study aimed to perform an in vivo examination using a critical-size periodontal canine model to investigate the capability of a 3D-printed soft membrane for guided tissue regeneration (GTR). This membrane is made of a specific composition of gelatin, elastin, and sodium hyaluronate that was fine-tuned and fully characterized in vitro in our previous study. The value of this composition is its potential to be employed as a suitable replacement for collagen, which is the main component of conventional GTR membranes, to overcome the cost issue with collagen. Methods: Critical-size dehiscence defects were surgically created on the buccal surface of the roots of canine bilateral mandibular teeth. GTR treatment was performed with the 3D-printed membrane and two commercially available collagen membranes (Botiss Jason® and Smartbrane-Regedent membranes) and a group without any membrane placement was considered as the control group. The defects were submerged with tension-free closure of the gingival flaps. Histologic and histometric analyses were employed to assess the periodontal healing over an 8-week experimental period. Results: Histometric evaluations confirmed higher levels of new bone formation in the 3D-printed membrane group. Moreover, in all defects treated with the membranes, the formation of periodontal tissues, bone, periodontal ligaments, and cementum was observed after 8 weeks, while in the control group, only connective tissue was found in the defect sites. There was no clinical sign of inflammation or recession of gingiva in any of the groups. Significance: The 3D-printed gelatin/elastin/sodium hyaluronate membrane can be safe and effective for use in GTR for periodontal tissue regeneration therapies, with better or comparable results to the commercial collagen membranes.

https://www.mdpi.com/1996-1944/16/4/1364/pdf?version=1675670420

3D-Printed Soft Membrane for Periodontal Guided Tissue Regeneration

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Sh Jamshidi

Author Tools

Chat about Author