Microfluidics, a technology characterized by the engineered manipulation of fluids at the submillimetre scale, has shown considerable promise for improving diagnostics and biology research. Certain properties of microfluidic technologies, such as rapid sample processing and the precise control of fluids in an assay, have made them attractive candidates to replace traditional experimental approaches. Here we analyse the progress made by lab-on-a-chip microtechnologies in recent years, and discuss the clinical and research areas in which they have made the greatest impact. We also suggest directions that biologists, engineers and clinicians can take to help this technology live up to its potential.

/pdf/the-present-and-future-role-of-microfluidics-in-biomedical-21k1pnojxw.pdf

The present and future role of microfluidics in biomedical research

Proper tissue function and regeneration rely on robust spatial and temporal control of biophysical and biochemical microenvironmental cues through mechanisms that remain poorly understood. Biomaterials are rapidly being developed to display and deliver stem-cell-regulatory signals in a precise and near-physiological fashion, and serve as powerful artificial microenvironments in which to study and instruct stem-cell fate both in culture and in vivo. Further synergism of cell biological and biomaterials technologies promises to have a profound impact on stem-cell biology and provide insights that will advance stem-cell-based clinical approaches to tissue regeneration.

Designing materials to direct stem-cell fate

Introduction A Why POC Diagnostics? B Time B Patient Responsibility and Compliance B Cost B Diagnostic Targets C Proteins C Metabolites and Other Small Molecules C Nucleic Acids C Human Cells D Microbes/Pathogens D Drugs and Food Safety D Current Context of POC Assays E POC Glucose Assays E Lateral Flow Assays E Limitations of “Traditional” POC Approaches F Enabling Technologies G Printing and Laminating G Microfluidic Technologies and Approaches: “Unit Operations” for POC Devices G Pumping and Valving H Mixing I Separation I Reagent Storage J Sample Preparation K Surface Chemistry and Device Substrates L Physical Adsorption L Bioaffinity Attachment L Covalent Attachment M Substrate Materials M Detection M Electrochemical Detection N Optical Detection N Magnetic Detection N Label-Free Methods O Enabling Multiplexed Assays O Recent Innovation O Lateral Flow Assay Technologies O Proteins P Antibodies P Protein Expression and Purification Q Nucleic Acids Q Aptamers R Infectious Diseases and Food/Water Safety R Blood Chemistry S Coagulation Markers S Whole Cells S Trends, Unmet Needs, Perspectives T Glucose T Global Health and the Developing World T Personalized Medicine and Home Testing U Technology Trends U Multiplexing V Author Information V Biographies V Acknowledgment W References W

/pdf/point-of-care-diagnostics-status-and-future-5c7xkio6mh.pdf

Point of care diagnostics: Status and future

A large part of the excitement behind microfluidics is in its potential for producing practical devices, but surprisingly few lab-on-a-chip based technologies have been successfully introduced into the market. Here, we review current work in commercializing microfluidic technologies, with a focus on point-of-care diagnostics applications. We will also identify challenges to commercialization, including lessons drawn from our experience in Claros Diagnostics. Moving forward, we discuss the need to strike a balance between achieving real-world impact with integrated devices versus design of novel single microfluidic components.

http://mnbs-2014.sciencesconf.org/conference/mnbs-2014/pages/Chin_Lab_Chip_2012_commercialisation_of_PoC.pdf

Commercialization of microfluidic point-of-care diagnostic devices

Microfluidics consist of microfabricated structures for liquid handling, with cross-sections in the 1–500 μm range, and small volume capacity (fL-nL) Capillary tubes connected with fittings,1 although utilizing small volumes, are not considered microfluidics for the purposes of this paper since they are not microfabricated Likewise, millifluidic systems, made by conventional machining tools, are excluded due to their larger feature sizes (>500 μm)

Though micromachined systems for gas chromatography were introduced in the 1970’s,2 the field of microfluidics did not gain much traction until the 1990’s3 Silicon and glass were the original materials used, but then the focus shifted to include polymer substrates, and in particular, polydimethylsiloxane (PDMS) Since then the field has grown to encompass a wide variety of materials and applications The successful demonstration of electrophoresis and electroosmotic pumping in a microfluidic device provided a nonmechanical method for both fluid control and separation4 Laser induced fluorescence (LIF) enabled sensitive detection of fluorophores or fluorescently labeled molecules The expanded availability of low-cost printing allowed for cheaper and quicker mask fabrication for use in soft lithography5 Commercial microfluidic systems are now available from Abbott, Agilent, Caliper, Dolomite, Micralyne, Microfluidic Chip Shop, Micrux Technologies and Waters, as a few prominent examples For a more thorough description of the history of microfluidics, we refer the reader to a number of comprehensive, specialized reviews,3, 6–11 as well as a more general 2006 review12

The field of microfluidics offers many advantages compared to carrying out processes through bulk solution chemistry, the first of which relates to a lesson taught to every first-year chemistry student Simply stated, diffusion is slow! Thus, the smaller the distance required for interaction, the faster it will be Smaller channel dimensions also lead to smaller sample volumes (fL-nL), which can reduce the amount of sample or reagents required for testing and analysis Reduced dimensions can also lead to portable devices to enable on-site testing (provided the associated hardware is similarly portable) Finally, integration of multiple processes (like labeling, purification, separation and detection) in a microfluidic device can be highly enabling for many applications

Microelectromechanical systems (MEMS) contain integrated electrical and mechanical parts that create a sensor or system Applications of MEMS are ubiquitous, including automobiles, phones, video games and medical and biological sensors13 Micro-total analysis systems, also known as labs-on-a-chip, are the chemical analogue of MEMS, as integrated microfluidic devices that are capable of automating multiple processes relevant to laboratory sciences For example, a typical lab-on-a-chip system might selectively purify a complex mixture (through filtering, antibody capture, etc), then separate target components and detect them

Microfluidic devices consist of a core of common components Areas defined by empty space, such as reservoirs (wells), chambers and microchannels, are central to microfluidic systems Positive features, created by areas of solid material, add increased functionality to a chip and can consist of membranes, monoliths, pneumatic controls, beams and pillars Given the ubiquitous nature of negative components, and microchannels in particular, we focus here on a few of their properties Microfluidic channels have small overall volumes, laminar flow and a large surface-to-volume ratio Dimensions of a typical separation channel in microchip electrophoresis (μCE) are: 50 μm width, 15 μm height and 5 cm length for a volume of 375 nL Flow in these devices is normally nonturbulent due to low Reynolds numbers For example, water flowing at 20°C in the above channel at 1 μL/min (222 cm/s) results in a Reynolds number of ~05, where <2000 is laminar flow Since flow is nonturbulent, mixing is normally diffusion-limited Small channel sizes also have a high surface-to-volume ratio, leading to different characteristics from what are commonly found in bulk volumes The material surface can be used to manipulate fluid movement (such as by electroosmotic flow, EOF) and surface interactions For a solution in contact with a charged surface, a double layer of charge is created as oppositely charged ions are attracted to the surface charges This electrical double layer consists of an inner rigid or Stern Layer and an outer diffuse layer An electrostatic potential known as the zeta potential is formed, with the magnitude of the potential decreasing as distance from the surface increases The electrical double layer is the basis for EOF, wherein an applied voltage causes the loosely bound diffuse layer to move towards an electrode, dragging the bulk solution along Charges on the exposed surface also exert a greater influence on the fluid in a channel as its size decreases Larger surface-to-volume ratios are more prone to nonspecific adsorption and surface fouling In particular, non-charged and hydrophobic microdevice surfaces can cause proteins in solution to denature and stick

We focus our review on advances in microfluidic systems since 2008 In doing this, we occasionally must cover foundational work in microfluidics that is considerably less recent We do not focus on chemical synthesis applications of microfluidics although it is an expanding area, nor do we delve into lithography, device fabrication or production costs Our specific emphasis herein is on four areas within microfluidics: properties and applications of commonly used materials, basic functions, integration, and selected applications For each of these four topics we provide a concluding section on opportunities for future development, and at the end of this review, we offer general conclusions and prospective for future work in the field Due to the considerable scope of the field of microfluidics, we limit our discussion to selected examples from each area, but cite in-depth reviews for the reader to turn to for further information about specific topics We also refer the reader to recent comprehensive reviews on advances in lab-on-a-chip systems by Arora et al10 and Kovarik et al14

/pdf/advances-in-microfluidic-materials-functions-integration-and-27mmao3n1o.pdf

Advances in microfluidic materials, functions, integration, and applications.

Ready access to diagnostic tests that work well under remote field conditions is a major barrier to improving the health of people in the developing world. Here, Curtis Chin and his colleagues have developed a chip-based, microfluidic device and handheld reader for the simultaneous and rapid diagnosis of HIV and syphilis that uses only 1 μl of unprocessed whole blood and that was successfully field tested in Rwanda.

Microfluidics-based diagnostics of infectious diseases in the developing world

We describe a microfluidic system that can control, in real time, the microenvironments of mammalian cells in naturally derived 3D extracellular matrix (ECM). This chip combines pneumatically actuated valves with an individually addressable array of 3D cell-laden ECM; actuation of valves determines the pathways for delivering reagents through the chip and for exchanging diffusible factors between cell chambers. To promote rapid perfusion of reagents through 3D gels (with complete exchange of reagents within the gel in seconds), we created conduits above the gels for fluid flow, and microposts to stabilize the gels under high perfusion rates. As a biological demonstration, we studied spatially segregated mouse embryonic stem cells and mouse embryonic fibroblasts embedded in 3D Matrigel over days of culture. Overall, this system may be useful for high-throughput screening, single-cell analysis and studies of cell-cell communication, where rapid control of 3D cellular microenvironments is desired.

Real-Time Microfluidic System for Studying Mammalian Cells in 3D Microenvironments

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Robert Rouse

Author Tools

Chat about Author

Papers

Microfluidics-based diagnostics of infectious diseases in the developing world

Real-Time Microfluidic System for Studying Mammalian Cells in 3D Microenvironments