Strengthening the heat-affected zone in actual weld joint of Inconel 625 alloys was crucial for engineering applications in aerospace, petroleum, nuclear energy, and marine industries. In this study, Gleeble thermal simulations were employed to investigate the influence of welding heat on grain morphology, carbide evolution, and mechanical properties of Inconel 625 alloys manufactured by selective laser melting (SLM). Typical elongated columnar grains along the building direction and parallel columnar array with obvious layer boundaries along the scanning direction were observed in SLM-processed Inconel 625 alloys with hot isostatic processing treatment. After Gleeble thermal simulations, the prominent equiaxed grains appeared in the entire gauge region that was directly exposed to the simulated welding heat owing to the recrystallization process. Meanwhile, the size of equiaxed grains significantly increased with the increasing peak temperature. Particularly, only MC-type carbides were observed in the γ-Ni matrix before and after the thermal simulation owing to the fairly rapid heating (100 °C/s) and cooling (30 °C/s) process. Simulated welding heat produced a negative effect on the mechanical properties of the Inconel 625 alloys, especially for the peak temperature of 1350 °C. Then, the respective contributions of the four conventional strengthening mechanisms were successfully quantified for understanding the effect of the simulated peak temperature on the yield strength of the Inconel 625 alloys. Finally, the observations of microstructural evolution indicated that the cross-slip of dislocations was the dominant deformation mechanism to account for the large strain-hardening rate of the Inconel 625 alloys.

Effect of welding thermal treatment on the microstructure and mechanical properties of nickel-based superalloy fabricated by selective laser melting

Characterization on the gradient microstructure near the fusion interface of dissimilar metal between high Cr heat-resistant steel and Ni-based Alloy 617

Analysis of carbide transformation in MC-M23C6 and its effect on mechanical properties of Ni-based superalloy

The relationship between the microstructure and impact toughness, especially the formation of the lamellar carbides and its effect on the impact toughness of the heat-affected zone of Alloy 617 (Alloy 617-HAZ), was systematically investigated. Impact test was performed on Alloy 617/9%Cr dissimilar welded joints aged for different time at 620 °C. The results showed that the characteristic zones of the whole welded joint revealed decreased impact toughness with increasing the aging time. The impact energies in weld metal showed high stability despite the aging process, while the Alloy 617-HAZ for all testing specimens presented the lowest impact toughness with various aging time. Meanwhile, the mixed grains were found in the base metal (BM) and heat-affected zone of Alloy 617, together with the twins with different widths located in the interior of the large grains. The columnar and equiaxed grain zones appear alternately due to the multilayer and multi-pass welding technique. In particular, compared with Alloy 617-BM, coarsened and even lamellar carbides were observed in Alloy 617-HAZ. These special carbides can separate the grains and therefore result in the formation of intergranular fracture morphology in Alloy 617-HAZ. Besides, the microhardness distribution was tested with a proper load, and the results exhibited that the weld possessed the highest hardness for all specimens with various aging time. The higher microhardness in Alloy 617-HAZ compared with that in Alloy 617-BM was attributed to the high density of the dislocations, which could be detected by transmission electron microscope. As a result, the coarsened carbides aggregated in the grain boundaries to form the lamellar layer are deemed as the main factor to reduce the impact toughness in Alloy 617-HAZ.

Formation of Lamellar Carbides in Alloy 617-HAZ and Their Role in the Impact Toughness of Alloy 617/9%Cr Dissimilar Welded Joint

The present study investigates susceptibility of Inconel 617 to liquation cracking in laser-based welding techniques such as autogenous laser welding (ALW) and laser-MIG hybrid welding (LHW) with v...

Liquation cracking in Inconel 617 alloy by Laser and Laser-Arc Hybrid welding

Evolution of carbides and its characterization in HAZ during NG-TIG welding of Alloy 617B

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Peng Wang

Author Tools

Chat about Author

Papers

Evolution of carbides and its characterization in HAZ during NG-TIG welding of Alloy 617B