High K/sub u/, uniaxial magnetocrystalline anisotropy, materials are generally attractive for ultrahigh density magnetic recording applications as they allow smaller, thermally stable media grains. Prominent candidates are rare-earth transition metals (Co/sub 5/Sm,...), and tetragonal intermetallic compounds (L1/sub 0/ phases FePt, CoPtY,...), which have 20-40 times higher K/sub u/ than today's hexagonal Co-alloy based media. This allows for about 3 times smaller grain diameters, D, and a potential 10-fold areal density increase (/spl prop/1/D/sup 2/), well beyond the currently projected 40-100 Gbits/in/sup 2/ mark, Realization of such densities will depend on a large number of factors, not all related to solving media microstructure problems, In particular it is at present not known how to record into such media, which may require write fields in the order of 10-100 kOe. Despite this unsolved problem, there is considerable interest in high Ku alternative media, both for longitudinal and perpendicular recording. Activities in this area will be reviewed and data on sputtered and evaporated thin FePt films, with coercivities exceeding 10000 Oe will be presented.

High K/sub u/ materials approach to 100 Gbits/in/sup 2/

Liquid phase sintering (LPS) is a process for forming high performance, multiple-phase components from powders. It involves sintering under conditions where solid grains coexist with a wetting liquid. Many variants of LPS are applied to a wide range of engineering materials. Example applications for this technology are found in automobile engine connecting rods and high-speed metal cutting inserts. Scientific advances in understanding LPS began in the 1950s. The resulting quantitative process models are now embedded in computer simulations to enable predictions of the sintered component dimensions, microstructure, and properties. However, there are remaining areas in need of research attention. This LPS review, based on over 2,500 publications, outlines what happens when mixed powders are heated to the LPS temperature, with a focus on the densification and microstructure evolution events.

/pdf/review-liquid-phase-sintering-19fo5ee4w3.pdf

Review: liquid phase sintering

Small, light weight and multifunctional electronic components are attracting much attention because of the rapid growth of the wireless communication systems and microwave products in the consumer electronic market. The component manufacturers are thus forced to search for new advanced integration, packaging and interconnection technologies. One solution is the low temperature cofired ceramic (LTCC) technology enabling fabrication of three-dimensional ceramic modules with low dielectric loss and embedded silver electrodes. During the past 15 years, a large number of new dielectric LTCCs for high frequency applications have been developed. About 1000 papers were published and ∼500 patents were filed in the area of LTCC and related technologies. However, the data of these several very useful materials are scattered. The main purpose of this review is to bring the data and science of these materials together, which will be of immense help to researchers and technologists all over the world. The comme...

Low loss dielectric materials for LTCC applications: a review

Binder Jet printing is an additive manufacturing technique that dispenses liquid binding agent on powder to form a two-dimensional pattern on a layer. The layers are stacked to build a physical article. Binder Jetting (BJ) can be adapted to almost any powder with high production rates and the BJ process utilizes a broad range of technologies including printing tehniques, powder deposition, dynamic binder/powder interaction, and post-processing methods. A wide variety of materials including polymers, metals, and ceramics have been processed successfully with Binder Jet. However, developing printing and post-processing methods that maximize part performance is a remaining challenge. This article presents a broad review of technologies and approaches that have been applied in Binder Jet printing and points towards opportunities for future advancement.

Binder jetting: A review of process, materials, and methods

This paper describes a sintering technique for ceramics and ceramic-based composites, using water as a transient solvent to effect densification (i.e. sintering) at temperatures between room temperature and 200 °C. To emphasize the incredible reduction in sintering temperature relative to conventional thermal sintering this new approach is named the "Cold Sintering Process" (CSP). Basically CSP uses a transient aqueous environment to effect densification by a mediated dissolution-precipitation process. CSP of NaCl, alkali molybdates and V2 O5 with small concentrations of water are described in detail, but the process is extended and demonstrated for a diverse range of chemistries (oxides, carbonates, bromides, fluorides, chlorides and phosphates), multiple crystal structures, and multimaterial applications. Furthermore, the properties of selected CSP samples are demonstrated to be essentially equivalent as samples made by conventional thermal sintering.

Cold Sintering: A Paradigm Shift for Processing and Integration of Ceramics

Densification controlled by solution-precipitation during liquid-phase sintering was analyzed for the aluminamagnesium aluminosilicate glass system. As a model system for liquid-phase sintering, narrowly sized alumina powders and up to 20 vol% magnesium aluminosilicate glass samples were isothermally sintered at 1550° to 1650°C. Densification rate increases with increasing liquid content and sintering temperature but decreases with increasing density. For samples with >15% grain growth, the densification rate during the solution-precipitation stage of sintering was proportional to (particle size)−2 and thus interface reaction-controlled. Activation energies ranged from 270 to 500 kJ/mol over the relative density range of 66% to 96%, respectively. The low activation energy is attributed to densification by particle rearrangement, whereas the higher activation energy is due to densification controlled by interface-reaction-controlled solution-precipitation. Intermediate activation energies are attributed to simultaneous densification by the two mechanisms.

Kinetic Analysis of Solution‐Precipitation During Liquid‐Phase Sintering of Alumina

This invention relates to a biojoint prosthesis comprising: a) a prosthetic comprising a first component, such as a femural head, having an outer surface comprising at least 90 mol % zirconia, and b) a second component, such as an acetabular cup, having a surface comprising a ceramic such as alumina, shaped to receive the outer surface of the first component, wherein the outer surface of the first component is received on the surface of the second component, and wherein (i) at least a portion of the surface of the second component receiving the first component comprises a ceramic having a surface roughness of no more than 100 nm, and (ii) the outer surface of the first component has a surface roughness of no more than 100 nm. Maintaining the surface roughness Ra at each surface below 100 nm substantially prevents surface damage nucleation when the articulation is in the low force regime common to hip joint prosthesis articulating surfaces. To attain low wear rates, surfaces are made smooth. Controlling the surface roughness of each surface to less than 15 nm reduces wear even more significantly.

Hip joint prosthesis having a zirconia head and a ceramic cup

This invention relates to a dense ceramics having ESD dissipative characteristics, tunable volume and surface resistivies in semi-insulative range (10?3 - 1011? Ohm-cm), substantially pore free, high flexural strength, light colors, for desired ESD dissipation characteristics, structural reliability, high vision recognition, low wear and particulate contamination to be used as ESD dissipating tools, fixtures, load bearing elements, work surfaces, containers in manufacturing and assembling electrostatically sensitive microelectronic, electromagnetic, electro-optic components, devices and systems.

ESD dissipative ceramics

The disclosure is directed to a solid oxide fuel cell stack. The solid oxide fuel cell stack includes at least two solid oxide fuel cells. The two solid oxide fuel cells share a common electrode.

Stack supported solid oxide fuel cell

Models for solution-precipitation controlled, intermediate stage liquid phase sintering (LPS) have been derived by assuming a tetrakaidecahedron grain geometry with cylindrical pore channels along the grain edges and incorporating the liquid content and dihedral angle by adapting Wray's two phase grain model. The stress distribution of a thin liquid film between the grains is modelled as a hydrostatic squeeze film. The model predicts that a thin viscous liquid film is stable and suppors the normal stress arising from the Laplacian force at the liquid-vapor interface. The derived equations for both diffusion and interface reaction controlled liquid phase sintering show significant differences with respects to Kingery's LPS models, but are in good agreement with those based on liquid phase controlled creep models. Comparative analyses of the derived models indicate that the rate controlling mechanism during solution-precipitation shifts from diffusion to interface reaction control or vice versa as a function of particle size and/ or grain growth.

A theoretical analysis of solution-precipitation controlled densification during liquid phase sintering

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Oh-Hun Kwon

Author Tools

Chat about Author