Norman M. Wereley
University of Maryland, College Park
494 Papers
3.4K Citations
Norman M. Wereley is an academic researcher from University of Maryland, College Park. The author has contributed to research in topics: Magnetorheological fluid & Damper. The author has an hindex of 53, co-authored 474 publications. Previous affiliations of Norman M. Wereley include Montreal Neurological Institute and Hospital & Massachusetts Institute of Technology.
Chat about Author
Papers
Transient analysis for damping identification in rotating composite beams with integral damping layers
TL;DR: In this article, damping augmentation in rotating composite beams via passive constrained layer damping (PCLD) has been evaluated in a vacuum chamber at rotational speeds ranging from 0 to 900 RPM.
34
A hydro-mechanical model for hysteretic damping force prediction of ER damper: experimental verification
TL;DR: In this paper, a model for hysteretic damping force prediction of an electrorheological (ER) damper which can be applicable to a small-sized passenger vehicle is presented.
33
Effective design strategy for a magneto-rheological damper using a nonlinear flow model
Min Mao,Young-Tai Choi,Norman M. Wereley +2 more
- 16 May 2005
TL;DR: In this paper, an effective design strategy for a magnetorheological (MR) damper using a nonlinear flow model is presented, where the MR valve inside a flow mode MR damper is approximated by a rectangular duct and its governing equation of motion is derived based on a non linear flow model to describe a laminar or turbulent flow behavior.
33
Seismic Response of Civil Structures Utilizing Semi-Active MR and ER Bracing Systems:
TL;DR: Magnetorheological (MR) and electrorheological dampers are a promising class of semi-active devices for the control of civil engineering structures for earthquake hazard mitigation as mentioned in this paper.
33
Measurement of Magnetorheological Fluid Properties at Shear Rates of up to 25 000 s $^{-1}$
TL;DR: In this paper, a Searle-type magnetorheometer (essentially a concentric cylinder rotating in a cup) was designed and fabricated at the University of Maryland, and two commercial MREAs were characterized over the shear rate range of 0-25 000 s-1.
33