High-entropy ceramics with five or more cations have recently attracted significant attention due to their superior properties for various structural and functional applications. Although the multi-component ceramics have been of interest for several decades, the concept of high-entropy ceramics was defined in 2004 by producing the first high-entropy nitride films. Following the introduction of the entropy stabilization concept, significant efforts were started to increase the entropy, minimize the Gibbs free energy and achieve stable single-phase high-entropy ceramics. High-entropy oxides, nitrides, carbides, borides and hydrides are currently the most popular high-entropy ceramics due to their potential for various applications, while the study of other ceramics, such as silicides, sulfides, fluorides, phosphides, phosphates, oxynitrides, carbonitrides and borocarbonitrides, is also growing fast. In this paper, the progress regarding high-entropy ceramics is reviewed from both experimental and theoretical points of view. Different aspects including the history, principles, compositions, crystal structure, theoretical/empirical design (via density functional theory, molecular dynamics simulation, machine learning, CALPHAD and descriptors), production methods and properties are thoroughly reviewed. The paper specifically attempts to answer how these materials with remarkable structures and properties can be used in future applications.

High-entropy ceramics: Review of principles, production and applications

Suddenly, COVID-19 has changed the world and the way people work. Companies had to accelerate something they knew was imminent in the future, but not immediate and extremely humongous. This situation poses a huge challenge for companies to survive and thrive in this complex business environment and for employees, who must adapt to this new way of working. An effective e-leadership, which promotes companies' adaptability, is needed. This study investigates the existing knowledge on teleworking and e-leadership; and analyzes the supposed challenges. The literature review shows that companies with effective e-leadership can view teleworking as an opportunity. It is advantageous for not only companies' productivity but also the environment and people who work remotely. However, a traditional or no leadership can result in some risks. Thriving in remote work environments implies that managers must adjust the companies' structure, making them less hierarchical, and developing new abilities to establish a strong and trustworthy relationship with their employees to maintain their competitiveness, while retaining a genuine concern for their employees' well-being. Similarly, successful e-leadership must be able to consolidate and lead effective virtual teams to accomplish organizational goals. This study contributes to the literature and leaders during the pandemic.

/pdf/e-leadership-and-teleworking-in-times-of-covid-19-and-beyond-54d28sqd1e.pdf

E-Leadership and Teleworking in Times of COVID-19 and Beyond: What We Know and Where Do We Go

Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants – A review article

Tissue engineering (TE) holds an enormous potential to develop functional scaffolds resembling the structural organization of native tissues, to improve or replace biological functions and prevent organ transplantation. Amongst the many scaffolding techniques, electrospinning has gained widespread interest because of its outstanding features that enable the production of non-woven fibrous structures with a dimensional organization similar to the extracellular matrix. Various polymers can be electrospun in the form of three-dimensional scaffolds. However, very few are successfully processed using environmentally friendly solvents; poly(vinyl alcohol) (PVA) is one of those. PVA has been investigated for TE scaffolding production due to its excellent biocompatibility, biodegradability, chemo-thermal stability, mechanical performance and, most importantly, because of its ability to be dissolved in aqueous solutions. Here, a complete overview of the applications and recent advances in PVA-based electrospun nanofibrous scaffolds fabrication is provided. The most important achievements in bone, cartilage, skin, vascular, neural and corneal biomedicine, using PVA as a base substrate, are highlighted. Additionally, general concepts concerning the electrospinning technique, the stability of PVA when processed, and crosslinking alternatives to glutaraldehyde are as well reviewed.

Poly(vinyl alcohol)-based nanofibrous electrospun scaffolds for tissue engineering applications

Biodegradable, stimuli-responsive polymers are essential platforms in the field of drug delivery and injectable biomaterials for application of bone tissue engineering. Various thermo-responsive hydrogels display water-based homogenous properties to encapsulate, manipulate and transfer its contents to the surrounding tissue, in the least invasive manner. The success of bioengineered injectable tissue modified delivery systems depends significantly on their chemical, physical and biological properties. Irrespective of shape and defect geometry, injectable therapy has an unparalleled advantage in which intricate therapy sites can be effortlessly targeted with minimally invasive procedures. Using material testing, it was found that properties of stimuli-responsive hydrogel systems enhance cellular responses and cell distribution at any site prior to the transitional phase leading to gelation. The substantially hydrated nature allows significant simulation of the extracellular matrix (ECM), due to its similar structural properties. Significant current research strategies have been identified and reported to date by various institutions, with particular attention to thermo-responsive hydrogel delivery systems, and their pertinent focus for bone tissue engineering. Research on future perspective studies which have been proposed for evaluation, have also been reported in this review, directing considerable attention to the modification of delivering natural and synthetic polymers, to improve their biocompatibility and mechanical properties.

A Review of Injectable Polymeric Hydrogel Systems for Application in Bone Tissue Engineering.

The co-doping of Ca and Mn in respective Bi and Fe-sites of BiFeO3 lattice leads to structural transition from rhombohedral (R3c space group) to orthorhombic (Pbnm space group) crystal symmetry. The tilt angle for anti-phase rotation of the oxygen octahedra of BiFeO3 at room temperature is observed to be ∼13.8°. It decreases with the increase in the co-doping percentage which suggests the composition-driven structural phase transition. The remnant magnetization for sample with 15% of co-doping becomes about 16 times that of BiFeO3. It may be attributed to the suppression of cycloid spin structure and uncompensated spins at the surface of nanocrystallites. Further increase in co-doping percentage results in the sharp reduction of remnant magnetization due to the dominant contribution from the collinear antiferromagnetic ordering in the Pbnm space group. The Arrott plot analysis clearly indicates the composition-driven crossover from the antiferromagnetic to weak ferromagnetic ordering and vice versa. Electron spin resonance results provide the evidence for the composition-driven phase transitions from an incommensurate spin cycloidal modulated state to one with nearly homogeneous spin order. The band gap (2.17 eV) of BiFeO3 measured using UV-Vis spectra was supported by the resonance Raman spectra.

Oxygen octahedra distortion induced structural and magnetic phase transitions in Bi1−xCaxFe1−xMnxO3 ceramics

Cross-linked polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) composite nanofibrous membranes have been prepared by electrospinning. Mechanical properties of the membranes improved significantly with PVP addition. PVP improved hydrophilicity and sustainable degradation of the membranes. Biocompatibility of the membranes was assessed by in vitro culture of native skin cells (L929 fibroblast and HaCaT keratinocytes). Tests showed sustained release of the antibiotic ciprofloxacin hydrochloride monohydrate by the membranes. Further, zone of inhibition study against Staphylococcus aureus growth demonstrated protective action against external pathogenic microbes. These studies show these simple PVA-PVP nanofibrous membranes are promising interactive antibiotic-eluting wound dressing materials.

Electrospun polyvinyl alcohol-polyvinyl pyrrolidone nanofibrous membranes for interactive wound dressing application

Novel polyvinyl alcohol-bioglass 45S5 based composite nanofibrous membranes as bone scaffolds.

Magnetic hysteresis loss and the resulting local heating in implanted thermoseed (magnetic biocompatible material) can be used to selectively destroy cancerous tissue. We have prepared magnetic bioglass ceramics (MBC) by annealing 41CaO·44 SiO2·4P2O5·8Fe2O3·3Na2O glass at temperatures ( TA) ranging from 750 °C to 1150 °C for 1 h. X-ray diffraction patterns confirm the presence of bone mineral (hydroxyapatite and wollastonite) and magnetite ( Fe3O4) phases in nanocrystalline form in the MBCs. Average crystallite size ( dav) of all the phases increased with increasing TA. Magnetization ( M-H) curves of all MBCs were recorded up to 20 kOe at 300 K to understand the evolution of magnetism in the nonmagnetic glass upon heat treatment. Magnetic properties correlated with dav(magnetite) for samples annealed up to 1050 °C. Electron paramagnetic resonance study was carried out to understand the behavior of sample annealed at 1150 °C and the evolution of magnetic properties in the MBCs. This study also reveals a methodology to control the magnetic properties of this MBC and its potential application in hyperthermia treatment of bone cancer.

Evolution of Magnetic Properties of ${\hbox{CaO}}\hbox{-}{\hbox{P}}_{2}{\hbox{O}}_{5}\hbox{-}{\hbox{Na}}_{2}{\hbox{O}}\hbox{-}{\hbox{Fe}}_{2}{\hbox{O}}_{3}\hbox{-}{\hbox{SiO}}_{2}$ Glass Upon Heat Treatment

Ultra-narrow band perfect absorber for sensing applications in the visible region

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Nisha Shankhwar

Author Tools

Chat about Author