The increasing environmental concerns and regulatory requirements have led to the development of eco-friendly bio-adsorbents for wastewater remediation. Natural biopolymers have drawn significant attention in this field due to their renewable and biodegradable nature. Among the various natural biopolymers, polysaccharides such as alginate, cellulose, starch, chitosan, and natural gums have attracted significant attention due to their availability and low cost. The main objective of this review is to provide a detailed account of bio-adsorbents derived from polysaccharides, covering their practical application and effectiveness in removing a broad range of pollutants from aqueous media. Each polysaccharide is comprehensively discussed based on the type of pollutants it can remove. Specifically, research papers from 2021 and onwards have been reviewed to present the latest progress in this field. Additionally, the synthesis, adsorption mechanism, and recyclability of each polysaccharide are briefly discussed. Finally, insights into future directions and perspectives for the development of polysaccharide-based adsorbents for wastewater remediation are provided. Overall, this review emphasizes the potential of natural biopolymers, particularly polysaccharides, as eco-friendly and cost-effective bio-adsorbents for wastewater treatment. Moreover, it provides valuable insights into potential avenues for future investigations within this domain, thereby offering significant benefits to both novice and seasoned researchers engaged in the study of wastewater remediation. 

Polysaccharides as eco-friendly bio-adsorbents for wastewater remediation: Current state and future perspective

This review article focuses on the potential of biopolymer-based nanocomposites incorporating nanoparticles, graphene oxide (GO), carbon nanotubes (CNTs), and nanoclays in adsorption and membrane filtration processes for water treatment. The aim is to explore the effectiveness of these innovative materials in addressing water scarcity and contamination issues. The review highlights the exceptional adsorption capacities and improved membrane performance offered by chitosan, GO, and CNTs, which make them effective in removing heavy metals, organic pollutants, and emerging contaminants from water. It also emphasizes the high surface area and ion exchange capacity of nanoclays, enabling the removal of heavy metals, organic contaminants, and dyes. Integrating magnetic (Fe2O4) adsorbents and membrane filtration technologies is highlighted to enhance adsorption and separation efficiency. The limitations and challenges associated are also discussed. The review concludes by emphasizing the importance of collaboration with industry stakeholders in advancing biopolymer-based nanocomposites for sustainable and comprehensive water treatment solutions. 

Next-Generation Water Treatment: Exploring the Potential of Biopolymer-Based Nanocomposites in Adsorption and Membrane Filtration

Abstract Graphene oxide (GO) and carbon nanotubes (CNTs) were loaded at different mutual ratios into poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-co-HFP) matrix and electrospun to construct mats that were assessed as smart sorbents for decontaminating water from methylene blue (MB) pollutant, while ensuring the additional possibility of detecting the dye amounts. The results revealed that sorption capacity enhances upon increasing GO content, which is beneficial to wettability and active area. Equilibrium adsorption of these materials is precisely predicted by the Langmuir isotherm model and the maximum capacities herein achieved, ranging from 120 to 555 mg/g depending on the formulation, are higher than those reported for similar systems. The evolution of the structure and properties of such materials as a function of dye adsorption was studied. The results reveal that MB molecules prompted the increase of electrical conductivity of the samples in a dose-dependent manner. Mats containing solely CNTs, while displaying the worst sorption performance, showed the highest electrical performances, displaying interesting changes in their electrical response as a function of the dye amount adsorbed, with a linear response and high sensitivity (309.4 µS cm −1 mg −1 ) in the range 0–235 µg of dye adsorbed. Beyond the possibility to monitor the presence of small amounts of MB in contaminated water and the saturation state of sorbents, this feature could even be exploited to transform waste sorbents into high-added value products, including flexible sensors for detecting low values of pressure, human motion, and so on. Graphical Abstract Multifunctional materials for dye absorption and detection, pressure sensing, fabricated by integrating GO and CNTs into PVDF-HFP matrix via electrospinning. 

Electrospun polymeric nanohybrids with outstanding pollutants adsorption and electroactivity for water treatment and sensing devices

Synthetic dye contamination of wastewater has long been a social issue, with adsorption being the most focused upon research technique among wastewater treatment. Using the co-precipitation method, superparamagnetic iron oxide nanoparticles (SPIONs) with the size of 13.6 ± 1.9 nm were synthesized. By adsorbing methylene blue (MB) on the modified surface of SPIONs using polyvinyl alcohol, chitosan, and graphene oxide, the entrapment efficiency at pH 7 can be up to 87.00 ± 0.16% after 13 days, and the highest MB loading capacity was 3.638 ± 0.009%, while the highest loading amount achieved was 36.385 ± 0.095 mg/g. The cumulative desorption capacity of the adsorbent at pH 3.8 was at its maximum at 8.94 ± 0.66% after 30 days. The results of the experiments indicated that the compound has a favorable impact on the adsorption of synthetic dyes; nevertheless, more research is needed to determine the ideal ratio, temperature, and pH levels for this chemical. 

Surface Modifications of Superparamagnetic Iron Oxide Nanoparticles with Polyvinyl Alcohol, Chitosan, and Graphene Oxide as Methylene Blue Adsorbents

Untreated textile effluent may contain toxic organic pollutants that can have negative impacts on the ecosystem. Among the harmful chemicals present in dyeing wastewater, there are two frequently used organic dyes: methylene blue (cationic) and congo red (anionic). The current study presents investigations on a novel two-tier nanocomposite membrane, i.e., a top layer formed of electrosprayed chitosan–graphene oxide and a bottom layer consisting of an ethylene diamine functionalized polyacrylonitrile electrospun nanofiber for the simultaneous removal of the congo red and methylene blue dyes. The fabricated nanocomposite was characterized using FT-IR spectroscopy, scanning electron microscopy, UV-visible spectroscopy, and Drop Shape Analyzer. Isotherm modeling was used to determine the efficiency of dye adsorption for the electrosprayed nanocomposite membrane and the confirmed maximum adsorptive capacities of 182.5 mg/g for congo red and 219.3 mg/g for methylene blue, which fits with the Langmuir isotherm model, suggesting uniform single-layer adsorption. It was also discovered that the adsorbent preferred an acidic pH level for the removal of congo red and a basic pH level for the removal of methylene blue. The gained results can be a first step for the development of new wastewater cleaning techniques.

/pdf/removal-of-methylene-blue-and-congo-red-using-a-chitosan-2g9eewia.pdf

Removal of Methylene Blue and Congo Red Using a Chitosan–Graphene Oxide-Electrosprayed Functionalized Polymeric Nanofiber Membrane

Textile wastewater accommodates many toxic organic contaminants that could potentially threaten the ecosystem if left untreated. Methylene blue is a toxic, non-biodegradable, cationic dye that is reportedly observed in significant amounts in the textile effluent stream as it is widely used to dye silk and cotton fabrics. Congo red is a carcinogenic anionic dye commonly used in the textile industry. This study reports an investigation of methylene blue and Congo red removal using a chitosan-graphene oxide dip-coated electrospun nanofiber membrane. The fabricated nanocomposite was characterized using Scanning Electron Microscopy (SEM), FT-IR Spectroscopy, Raman Spectroscopy, UV-vis Spectroscopy, Drop Shape Analyzer, and X-ray Diffraction. The isotherm modeling confirmed a maximum adsorptive capacity of 201 mg/g for methylene blue and 152 mg/g for Congo red, which were well fitted with a Langmuir isotherm model indicating homogenous monolayer adsorption.

/pdf/chitosan-graphene-oxide-dip-coated-polyacrylonitrile-1xkt9pf2.pdf

Chitosan-Graphene Oxide Dip-Coated Polyacrylonitrile-Ethylenediamine Electrospun Nanofiber Membrane for Removal of the Dye Stuffs Methylene Blue and Congo Red

The outstanding emission of halide perovskites make them ideal candidates for white emission light-emitting diodes (LEDs) for lighting applications. However, many perovskites contain toxic or scarce elements and have unsatisfactory stability. Here, we report a target-driven approach, based on active learning (AL) techniques, to discover halide perovskites suitable for commercial LED applications. Based on the similarity between halide and oxide perovskites, a model trained on an oxide perovskite dataset plus six AL-selected halide perovskites exhibited excellent performance for photoluminescence quantum yield (PLQY) predictions of oxide and halide perovskites. The model proposed a strong relationship between ionic radii and PLQY, postulated to be due to the self-trap excitons derived from the Jahn-Teller deformation. A novel halide perovskite phosphor, Cs4Zn(Bi0.85Sb0.15)2Cl12:0.01Mn, was designed and synthesized with the aid of the model. It exhibited an 88 % PLQY and outstanding thermal and luminescent stability. A simple white LED was fabricated from this material, exemplifying its commercial potential. This study demonstrates how machine learning techniques can accelerate discovery of next-generation phosphors for high performance single emitter-based white-light emitting devices. 

Data driven high quantum yield halide perovskite phosphors design and fabrication

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Nethmi S. L. Dissanayake

Author Tools

Chat about Author

Papers

Chitosan-Graphene Oxide Dip-Coated Polyacrylonitrile-Ethylenediamine Electrospun Nanofiber Membrane for Removal of the Dye Stuffs Methylene Blue and Congo Red

Removal of Methylene Blue and Congo Red Using a Chitosan–Graphene Oxide-Electrosprayed Functionalized Polymeric Nanofiber Membrane

Data driven high quantum yield halide perovskite phosphors design and fabrication