Open Innovation: The New Imperative for Creating and Profiting from Technology

Circular supply chain management: A definition and structured literature review

Industry 4.0 (I4.0) and Circular Economy (CE) are undoubtedly two of the most debated topics of the last decades. Progressively, they gained the interest of policymakers, practitioners and scholars...

https://www.tandfonline.com/doi/pdf/10.1080/00207543.2019.1680896

Assessing relations between Circular Economy and Industry 4.0: a systematic literature review

Linking circular economy and digitalisation technologies: A systematic literature review of past achievements and future promises

A survey of smart product-service systems: Key aspects, challenges and future perspectives

Re-distributed manufacturing presents a number of opportunities and challenges for New Product Development in a future Circular Economy. It has been argued that small-scale, flexible and localised production systems will reduce resource consumption, lower transport emissions and extend product lifetimes. At the same time smart products within the Internet of Things will gather and report data on user behaviour and product status. Many sustainable design tools have previously been developed but few are able to imagine and develop visions of how future sustainable product service systems might be manifested. This paper introduces the concept of Consumer Intervention Mapping as a tool for creating future product strategies. The tool visualises the points within a product’s lifecycle where stakeholders are able to intervene in the product’s expected journey. This perspective enables the rapid construction of scenarios that explore and describe future circular product service systems. Validation of the tool in three workshops is described and the outcomes are presented. Consumer Intervention Mapping is successful in creating scenarios that describe existing product service systems and new product concepts adapted to a Circular Economy paradigm. Further work is required to refine the tool’s performance in more focused and reflective design exercises.

https://www.mdpi.com/2071-1050/10/6/2088/pdf

Consumer intervention mapping—A tool for designing future product strategies within circular product service systems

This paper explores the narrative of peoples’ relationships with products as a window on understanding the types of innovation that may inform a culture of sufficiency. The work forms part of the ‘Business as Unusual: Designing Products with Consumers in the Loop’ [BaU] project, funded as part of the UK EPSRC-ESRC RECODE network (RECODE, 2016) that aims to explore the potential of re-distributed manufacturing (RdM) in a context of sustainability. This element of the project employed interviews, mapping and workshops as methods to investigate the relationship between people and products across the product lifecycle. A focus on product longevity and specifically the people-product interactions is captured in conversations around product maintenance and repair. In exploring ideas of ‘broken’ we found different characteristics of, and motivations for, repair. Mapping these and other product-people interactions across the product lifecycle indicated where current activity is, who owns such activity (i.e. organisation or individual) and where gaps in interactions occur. These issues were explored further in a workshop which grouped participants to look at products from the perspective of one of four scenarios; each scenario represented either short or long product lifespans and different types of people engagement in the design process. The findings help give shape to new scenarios for designing sufficiency-based social models of material flows.

Developing scenarios for product longevity and sufficiency


Purpose
The purpose of this paper is to understand how Design for Additive manufacturing Knowledge has been developing and its significance to both academia and industry.


Design/methodology/approach
In this paper, the authors use a bibliometric approach to analyse publications from January 2010 to December 2020 to explore the subject areas, publication outlets, most active authors, geographical distribution of scholarly outputs, collaboration and co-citations at both institutional and geographical levels and outcomes from keywords analysis.


Findings
The findings reveal that most knowledge has been developed in DfAM methods, rules and guidelines. This may suggest that designers are trying to learn new ways of harnessing the freedom offered by AM. Furthermore, more knowledge is needed to understand how to tackle the inherent limitations of AM processes. Moreover, DfAM knowledge has thus far been developed mostly by authors in a small number of institutional and geographical clusters, potentially limiting diverse perspectives and synergies from international collaboration which are essential for global knowledge development, for improvement of the quality of DfAM research and for its wider dissemination.


Originality/value
A concise structure of DfAM knowledge areas upon which the bibliometric analysis was conducted has been developed. Furthermore, areas where research is concentrated and those that require further knowledge development are revealed.


https://figshare.com/articles/journal_contribution/A_bibliometric_analysis_of_research_in_design_for_additive_manufacturing/17113820/1/files/31645643.pdf

A bibliometric analysis of research in design for additive manufacturing

Processes such as co-design, crowdsourcing and open design are challenging previously held notions about the role of the consumer within New Product Development. The degree and validity of consumer involvement in product creation varies according to the process concerned, however to date little research exists to classify this involvement. In this paper the New Product Development process is divided into four phases: conception, specification, design and manufacture. The ability of the consumer to influence each phase when engaged in design activity is assessed. A graphical classification of New Product Development strategies is presented, mapped against the commitment of the designer to consumer involvement, and a number of new categories of design are proposed. The changing role of the designer from interpreter to facilitator of consumer wishes is also discussed.

/pdf/a-classification-of-consumer-involvement-in-new-product-2luidezgmg.pdf

A Classification of Consumer Involvement in New Product Development

This thesis stems from the future scenario that as additive manufacturing (AM) technologies become cheaper and more readily available, consumers without formal design training will begin to customise, design and manufacture their own products. Much of this activity is likely to infringe on brands' intellectual property. The research explores the feasibility of a situation in which, rather than attempting to prohibit such activity, manufacturers engage with consumers to facilitate it, thus retaining control (albeit reduced) over their brand's image and the quality of products offered.

The research begins with a literature review encompassing AM technologies and their adoption by consumers; mass customisation (MC) and the management of variation in product offering; and traditional models of industrial design (ID), including user-centred design and co-design. It finds that conventional definitions of MC and ID are unable to provide for the possibility of consumer intervention in the shape and non-modular configuration of products. Further research was then conducted in the areas of Open Design (including crowdsourcing, open sourcing and 'hardware hacking') as well as bespoke customisation, which were found to be much more accommodating of the scenario proposed. A new term, 'consumer design', is introduced and defined, together with the hypothesis that in future, the role of the industrial designer may be to design 'unfinished' products. An original classification of consumer involvement in ID is presented.

Empirical research, undertaken with consumers using an iterative design software package (Genoform), demonstrated a preference for designing within pre-determined boundaries. Action research was conducted to assess consumer-oriented 3D CAD software, and compare its capabilities with that of MC toolkits. A survey of senior designers and brand managers revealed strategies for implementing and managing a brand's product design language, and a guide was created to show the relative importance of designed features. Using these findings, a prototype toolkit was created to demonstrate how a brand might facilitate consumer interaction with the shape design of a complex consumer electronics product (in this case a mobile phone). The toolkit was tested with both consumers and experienced designers to assess its viability.

The research finds that it is possible to create a consumer-design toolkit which enables untrained users to change the form of a product, whilst maintaining brand equity and ensuring the product's functionality and manufacturability.

The specification of a consumer design toolkit to support personalised production via additive manufacturing

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Matt Sinclair

Author Tools

Chat about Author