Magd Abdel Wahab
Ghent University
302 Papers
642 Citations
Magd Abdel Wahab is an academic researcher from Ghent University. The author has contributed to research in topics: Finite element method & Fretting. The author has an hindex of 37, co-authored 239 publications. Previous affiliations of Magd Abdel Wahab include Duy Tan University & Katholieke Universiteit Leuven.
Chat about Author
Papers
Numerical simulations of soil physicochemistry and aeration influences on the external corrosion and cathodic protection design of buried pipeline steels
TL;DR: In this article, a finite element model of the external corrosion of buried steel pipelines at coating failures is developed to better predict degradation in different soil and cathodic protection (CP) environments.
69
Finite element analysis of fretting fatigue under out of phase loading conditions
TL;DR: In this article, three numerical models are used to model the effect of both in phase and out of phase loading on contact stresses and damage initiation locations, and it is observed that phase difference significantly affects the damage initiation location.
69
A continuum damage mechanics approach for fretting fatigue under out of phase loading
TL;DR: In this article, the authors investigated the effectiveness of continuum damage mechanics (CDM) approach under in phase and 90° out of phase loading, and the results obtained using CDM approach are compared to those obtained using critical plane (CP) approach.
68
Modelling the environmental degradation of the interface in adhesively bonded joints using a cohesive zone approach
TL;DR: In this paper, the use of a cohesive zone model (CZM) to predict the long-term durability of adhesively bonded structures exposed to humid environments has been investigated.
66
Modelling Environmental Degradation in EA9321-Bonded Joints using a Progressive Damage Failure Model
TL;DR: In this paper, a progressive cohesive failure model was proposed to predict the residual strength of adhesively bonded joints using a moisture-dependent critical equivalent plastic strain for the adhesive, which was calibrated using an aged, mixed-mode flexure (MMF) test.
65