M. Solis
5 Papers
12 Citations
M. Solis is an academic researcher. The author has contributed to research in topics: Magnet & Niobium-tin. The author has an hindex of 2, co-authored 5 publications.
Chat about Author
Papers
Assembly and Pre-Loading Specifications for the Series Production of the Nb3Sn MQXFA Quadrupole Magnets for the HL-LHC
Paolo Ferracin,Giorgio Ambrosio,Daniel W. Cheng,J. Ferradas Troitino,L. Garcia Fajardo,S. Izquierdo Bermudez,Soren Prestemon,Katherine Ray,M. Solis,Ezio Todesco,Giorgio Vallone +10 more
TL;DR: In this paper , a series of assembly and pre-load specifications have been defined with the goals of minimizing the risk of conductor degradation and providing the mechanical support required to reach the nominal current during powering.
8
The Challenges and Solutions of Meeting the Assembly Specifications for the 4.5 m Long MQXFA Magnets for the Hi-Luminosity LHC
Daniel W. Cheng,Giorgio Ambrosio,Paolo Ferracin,L. Garcia Fajardo,Soren Prestemon,Katherine Ray,G.L. Sabbi,M. Solis,Giorgio Vallone,X.R. Wang +9 more
TL;DR: In this paper , a body of assembly data from the pre-series (MQXFA03-MQXfa07) and series (MQXFA08-MQ XFA11) of the CERN Hi-Luminosity LHC upgrade is presented.
3
Field Quality of the 4.5-m-Long MQXFA Pre-Series Magnets for the HL-LHC Upgrade as Observed During Magnet Assembly
X. Wang,Giorgio Ambrosio,Anis Ben Yahia,Daniel W. Cheng,Joseph DiMarco,Paolo Ferracin,W. Ghiorso,S. Izquierdo Bermudez,C. Myers,Heng Pan,Soren Prestemon,Katherine Ray,G.L. Sabbi,M. Solis +13 more
TL;DR: In this paper , the magnetic measurements on the coil-pack sub-assembly and magnets after loading are used to track the field quality for two purposes: first, it serves as a quality assurance tool to check if the magnet field quality is on track to meet the acceptance criteria.
Applied Metrology for the Assembly of the Nb3Sn MQXFA Quadrupole Magnets for the HL-LHC AUP
TL;DR: The US HL-LHC Accelerator Upgrade Project (AUP) is building Nb3Sn quadrupole magnets, called MQXFA, with plans to install 16 of them in the HL LHC Interaction Regions as mentioned in this paper .
2
Analysis of the Mechanical Performance of the 4.2-m-Long MQXFA Magnets for the Hi-Lumi LHC Upgrade
L. Garcia Fajardo,Giorgio Ambrosio,Anis Ben Yahia,Daniel W. Cheng,Paolo Ferracin,J. Ferradas Troitino,S. Izquierdo Bermudez,Joseph Muratore,Soren Prestemon,Katherine Ray,M. Solis,Giorgio Vallone +11 more
TL;DR: In this article , the available strain gauge data from eight identical Nb3Sn MQXFA tested magnets are summarized, focusing on the endurance test, and on a possible cause of underperformance of the two magnets that did not pass the vertical test.
2