M. Adami
University of Trento
12 Papers
125 Citations
M. Adami is an academic researcher from University of Trento. The author has contributed to research in topics: Thin film & Scanning electron microscope. The author has an hindex of 11, co-authored 12 publications.
Chat about Author
Papers
Hydrogen production by photocatalytic water-splitting using Cr- or Fe-doped TiO2 composite thin films photocatalyst
TL;DR: In this paper, radio-frequency magnetron sputtering and a sol-gel method were used to study hydrogen generation by photocatalytic water-splitting under visible light irradiation.
423
Microstructure, oxidation and H2-permeation resistance of TiAlN films deposited by DC magnetron sputtering technique
TL;DR: The ternary compound TiAlN coating has been known to be superior to binary compound TiN in protecting tools, which may be damaged by high thermal load as discussed by the authors, and the results reveal that the structure evolves from the cubic B1 type of TiN to the hexagonal phase of AlN when the Al content increases from 0 to 70 at.%.
78
Polymer surface modification by ion implantation and reactive deposition of transparent films
TL;DR: In this paper, the surface properties of polycarbonate (PC) specimens were subjected to medium-high energy (160 keV) nitrogen ion implantation at different dosage, and a colour change from amber to dark brown with increasing fluence was associated with the ion implantations process.
51
Ion beam induced enhanced adhesion of Au films deposited on polytetrafluoroethylene
TL;DR: In this article, the authors studied the adhesion of Au thin films on polytetrafluoroethylene (PTFE) substrates with 160 keV N ions to a dose range between 1 ×10 14 and 1×10 17 ions/cm 2.
42
Mechanical behaviour of nitrogen-implanted aluminium alloys
L. Guzman,G. Bonini,M. Adami,Paolo Maria Ossi,Paolo Maria Ossi,Antonio Miotello,M. Vittori-Antisari,A.M. Serventi,E Voltolini +8 more
TL;DR: In this paper, the effect of nitrogen implantation into pure aluminium has been extensively explored, taking into account the variation of several physical and technological properties of the implanted layer, and the formation of aluminium nitride, which occurs under specific choices of the implantation parameters, is associated with an increase in hardness.
32