9 Papers
23 Citations
Li Guibiao is an academic researcher from Shaanxi University of Science and Technology. The author has contributed to research in topics: Ceramic & Hydrothermal circulation. The author has an hindex of 5, co-authored 9 publications.
Chat about Author
Papers
ZrB 2 particles reinforced glass coating for oxidation protection of carbon/carbon composites
TL;DR: In this article, a dense ZrB2/SiO2 coating was prepared on the SiC coated carbon/carbon composites by a facile sol-dipping approach, which could protect the composites from being oxidized for 160 h at 1773 K with a weight loss of 6.9 mg/cm2.
Effects of ZrC/SiC ratios on mechanical and ablation behavior of C/C–ZrC–SiC composites prepared by carbothermal reaction of hydrothermal co-deposited oxides
Haibo Ouyang,Haibo Ouyang,Yulei Zhang,Cuiyan Li,Cuiyan Li,Li Guibiao,Jianfeng Huang,Hejun Li +7 more
TL;DR: In this article, the composites with a molar ratio of ZrC/SiC≈2:1 presented outstanding ablation resistance with a mass ablation rate of 0.06
50
Microstructure and properties of C/C–ZrC composites prepared by hydrothermal deposition combined with carbothermal reduction
TL;DR: In this paper, a carbon fiber reinforced carbon matrix containing ZrC (C/C-ZrC) composites were prepared by hydrothermal deposition combined with carbothermal reduction.
22
Microstructure and ablation properties of C/C-Zr-Si-O composites prepared by carbothermal reduction of hydrothermal co-deposited oxides
TL;DR: C/C-Zr-Si-O composites were prepared by carbothermal reduction of hydrothermal co-deposited ZrO2, SiO2 and C as discussed by the authors.
15
Patent
Preparation method of carbon fiber-reinforced multiphase carbide ceramic-based composite material
Li Cuiyan,Li Guibiao,Ouyang Haibo,Huang Jianfeng,Liu Xue,Fei Jie,Cao Liyun,Zhang Taobo +7 more
- 04 Sep 2018
TL;DR: In this article, a carbon fiber-reinforced multiphase carbide ceramic-based composite material is prepared according to a microwave hydrothermal method, waste of the raw materials is reduced in the process and the utilization rate of the materials is well increased.
5