Systèmes de management environnemental — Exigences et lignes directrices pour son utilisation PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. This second edition cancels and replaces the first edition (ISO 14001:1996), which has been technically revised.

環境マネジメントシステム : 要求事項及び利用の手引 = Environmental management systems : requirements with guidance for use

Coal power generation is a primary cause of greenhouse gas (GHG) and toxic airborne emissions globally. We present a uniquely comprehensive inventory of CO2, methane, particulate matter, sulfur dioxide, nitrogen oxides and mercury emissions for 7,861 coal-generating units including their supply chains. Total GHG and toxic substance emissions are largest from China, the United States, India, Germany and Russia (together >64% per pollutant). Overall supply chain contributions are below 19%, but exceed 75% for individual units and pollutants. Methane emissions from underground coal mining offset Chinese coal power plant efficiency advantages in comparison to India. Health impacts, as quantified by regionalized life cycle assessment, are highest in India and parts of eastern and southeastern Europe due to lack of modern flue gas treatment, and in China due to widespread coal power generation. Deployment of state-of-the-art flue gas treatment, driven by local emission limits, can mitigate health impacts in India and parts of Europe while it is already largely used in China and the United States. Phase-out of the 10% most polluting coal power plants (by capacity) would reduce coal power GHG emissions by 16% or human health impacts by 64%, respectively. Coal power generation contributes greenhouse gas and toxic air pollution worldwide. This study provides the most comprehensive analysis of such air pollution, analysing data on 7,861 coal-generating units and their supply chains. China, the United States, India, Germany and Russia contribute the most, and pollutant exposure risks are highest in India and China, but for differing reasons.

/pdf/global-emission-hotspots-of-coal-power-generation-3x5qqq67vi.pdf

Global emission hotspots of coal power generation

Air pollutant emissions from coal-fired power plants in China over the past two decades

It is crucial to control NOx emission into the atmosphere because it can make several harmful health and environmental effects. Many techniques are available for NOx reduction, and among them, sele...

Recent advances in selective catalytic reduction of NOx by carbon monoxide for flue gas cleaning process: a review

Global warming potential and economic performance of gasification-based chemical recycling and incineration pathways for residual municipal solid waste treatment in Germany.

The BAT Reference Document (BREF) for Large Combustion Plants is part of a series of documents presenting the results of an exchange of information between the EU Member States, the industries concerned, non-governmental organisations promoting environmental protection, and the Commission, to draw up, review, and -where necessaryupdate BAT reference documents as required by Article 13(1) of Directive 2010/75/EU on Industrial Emissions. This document is published by the European Commission pursuant to Article 13(6) of the Directive. This BREF for Large Combustion Plants concerns the following activities specified in Annex I to Directive 2010/75/EU:  1.1: Combustion of fuels in installations with a total rated thermal input of 50 MW or more, only when this activity takes place in combustion plants with a total rated thermal input of 50 MW or more.  1.4: Gasification of coal or other fuels in installations with a total rated thermal input of 20 MW or more, only when this activity is directly associated to a combustion plant.  5.2: Disposal or recovery of waste in waste co-incineration plants for non-hazardous waste with a capacity exceeding 3 tonnes per hour or for hazardous waste with a capacity exceeding 10 tonnes per day, only when this activity takes place in combustion plants covered under 1.1 above. In particular, this document covers upstream and downstream activities directly associated with the aforementioned activities including the emission prevention and control techniques applied. The fuels considered in this document are any solid, liquid and/or gaseous combustible material including:  solid fuels (e.g. coal, lignite, peat);  biomass (as defined in Article 3(31) of Directive 2010/75/EU);  liquid fuels (e.g. heavy fuel oil and gas oil);  gaseous fuels (e.g. natural gas, hydrogen-containing gas and syngas);  industry-specific fuels (e.g. by-products from the chemical and iron and steel industries);  waste except mixed municipal waste as defined in Article 3(39) and except other waste listed in Article 42(2)(a)(ii) and (iii) of Directive 2010/75/EU. Important issues for the implementation of Directive 2010/75/EU in the Large Combustion Plants sector are the emissions to air of nitrogen oxides, sulphur dioxide, hydrogen chloride and fluoride, organic compounds, dust, and metals including mercury; emissions to water resulting especially from the use of wet abatement techniques for the removal of sulphur dioxide from the flue-gases; resource efficiency and especially energy efficiency. This BREF contains 12 chapters. Chapters 1 and 2 provide general information on the Large Combustion Plants industrial sector and on the industrial processes used within this sector. Chapter 3 provides data and general information concerning the environmental performance of installations within the sector in terms of water consumption, the generation of waste and general techniques used within this sector. It also describes in more detail the general techniques to prevent or, where this is not practicable, to reduce the environmental impact of installations in this sector that were considered in determining the BAT. Chapters 4 to 9 provide the following information given below on specific combustion processes (gasification, combustion of solid fuel, combustion of liquid fuel, combustion of gaseous fuel, multi-fuel combustion and waste co-incineration). Chapter 10 presents the BAT conclusions as defined in Article 3(12) of the Directive. Chapter 11 presents information on 'emerging techniques' as defined in Article 3(14) of the Directive. Chapter 12 is dedicated to concluding remarks and recommendations for future work. Printed in Ispra (Italy)

Best Available Techniques (BAT) Reference Document for Large Combustion Plants.Industrial Emissions Directive 2010/75/EU (Integrated Pollution Prevention and Control)

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Lecomte Thierry

Author Tools

Chat about Author

Papers

Best Available Techniques (BAT) Reference Document for Large Combustion Plants.Industrial Emissions Directive 2010/75/EU (Integrated Pollution Prevention and Control)