BACKGROUND Perovskite solar cells (PSCs) have attracted intensive attention because of their ever-increasing power conversion effi­ciency (PCE), low-cost materials constituents, and simple solution fabrication process. Initi­ated in 2009 with an efficiency of 3.8%, PSCs have now achieved a lab-scale power conversion efficiency of 23.3%, rivaling the performance of commercial multicrystalline silicon solar cells, as well as copper indium gallium selenide (CIGS) and cadmium telluride (CdTe) thin-film solar cells. Thousands of articles re­lated to PSCs have been published each year since 2015, highlighting PSCs as a topic of in­tense interest in photovoltaics (PV) research. With high efficiencies achieved in lab devices, stability and remaining challenges in upscal­ing the manufacture of PSCs are two critical concerns that must be addressed on the path to PSC commercialization. ADVANCES We review recent progress in PSCs and discuss the remaining challenges along the pathway to their commercialization. Device configurations of PSCs (see the figure) include mesoscopic formal (n-i-p) and inverted (p-i-n) structures, planar formal and inverted struc­tures, and the printable triple mesoscopic structures. PCEs of devices that use these structures have advanced rapidly in the case of small-area devices (~0.1 cm 2 ). PSCs are also attracting attention as top cells for the construction of tandem solar cells with existing mature PV technologies to increase efficiency beyond the Shockley-Queisser limit of single-junction devices. The stability of PSCs has attracted much well-deserved attention of late, and notable progress has been made in the past few years. PSCs have recently achieved exhibited life­times of 10,000 hours under 1 sun (1 kW/m 2 ) illumina­tion with an ultraviolet filter at a stabilized temperature of 55°C and at short-circuit conditions for a printable triple mesoscopic PSCs. This irradiation is equivalent to the total irradiation of 10 years of outdoor use in most of Europe. However, within the PSC community, standard testing protocols require further development. In addition, transpar­ency in reporting standards on stability tests needs to be improved; this can be achieved by providing both initial photovoltaic performance and normalization parameters. The upscaling of PSCs has also progressed steadily, leading to PSC mini-modules, standard-sized modules, and power systems. PV companies have set out to manufacture large-area PSC modules (see the figure), and a 110-m 2 perovskite PV system with screen-printed triple mesoscopic PSC modules was recently debuted. Studies of these increased-area modules and systems will promote the development of PSCs toward commercializa­tion. PSC research is expanding to cover fundamental topics on materials and lab-sized cells, as well as to address issues of in­dustrial-scale manufacturing and deployment. OUTLOOK The PV market has been continu­ously expanding in recent years, bringing op­portunities for new PV technologies of which PSCs are promising candidates. It is impera­tive to achieve a low cost per watt, which means that both efficiency and lifetime need improve­ment relative to current parameters. The efficiency gap between lab cells and industrial modules has seen impressive reduc­tions in crystalline silicon; PSCs must simi­larly enlarge module areas to the panel level and need to achieve lifetimes comparable to those of legacy PV technologies. Other improvements will need to include industry-scale electronic-grade films, recycling methods to address concerns regarding lead toxicity, and the adoption of standardized testing protocols to predict the operation lifetime of PSCs. Modules will need to endure light-induced degradation, potential-induced degradation, partial-shade stress, and mechanical shock. The field can benefit from lessons learned during the development of mature PV technologies as it strives to de­fine, and overcome, the hurdles to PSC com­mercial impact.

/pdf/challenges-for-commercializing-perovskite-solar-cells-g4y3r5h64j.pdf

Challenges for commercializing perovskite solar cells.

This review article examines the current state of understanding in how metal halide perovskite solar cells can degrade when exposed to moisture, oxygen, heat, light, mechanical stress, and reverse bias. It also highlights strategies for improving stability, such as tuning the composition of the perovskite, introducing hydrophobic coatings, replacing metal electrodes with carbon or transparent conducting oxides, and packaging. The article concludes with recommendations on how accelerated testing should be performed to rapidly develop solar cells that are both extraordinarily efficient and stable.

Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics.

A Review on Additives for Halide Perovskite Solar Cells

Organic-inorganic hybrid perovskite solar cells (HPSCs) have achieved an impressive power conversion efficiency (PCE) of 25.2% in 2019. At this stage, it is of paramount importance to understand in detail the working mechanism of these devices and which physical and chemical processes govern not only their power conversion efficiency but also their long-term stability. The interfaces between the perovskite film and the charge transport layers are among the most important factors in determining both the PCE and stability of HPSCs. Herein, an overview is provided on the recent advances in the fundamental understanding of how these interfaces influence the performance of HPSCs. Firstly, it is discussed how the surface energy of the charge transport layer, the energy level alignment at the interfaces, the charge transport in interfacial layers, defects and mobile ions in the perovskite film, and interfacial layers or at the interfaces affect the charge recombination as well as hysteresis and light soaking phenomenon. Then it is discussed how the interfaces and interfacial materials influence the stability of HPSCs. At the same time, an overview is also provided on the various design strategies for the interfaces and the interfacial materials. At the end, the outlook for the development of highly efficient and stable HPSCs is provided.

/pdf/the-role-of-the-interfaces-in-perovskite-solar-cells-46yun4qj70.pdf

The Role of the Interfaces in Perovskite Solar Cells

Rutile titanium dioxide (TiO2 ) is a promising photocatalyst due to its high thermodynamic stability and few intragrain defects. However, it has not yet achieved photocatalytic activity comparable to that of anatase TiO2 owing to its higher recombination rate of electron-hole pairs. To effectively separate the electron-hole pairs in rutile TiO2 , a facet heterojunction (FH) structure to prolong the lifetime of the photogenerated electrons is proposed. Ultrathin TiO2 nanosheets with different facets are coated in situ onto TiO2 nanorod (NR) substrates, where FHs are built among the nanosheets as well as between the nanosheets and NR substrates. The as-prepared rutile TiO2 , with an FH structure (FH-TiO2 ), serves as an effective photocatalyst for water splitting. More than 45 and 18 times higher photogenerated current density and H2 production rate, respectively, are obtained compared to those of pure rutile TiO2 NRs. Moreover, FH-TiO2 delivers a 0.566 mmol g-1 h-1 H2 production rate even in pure water. This study offers important insights into the rational design of rutile TiO2 structures for highly efficient photocatalytic reactions.

A Photoresponsive Rutile TiO2 Heterojunction with Enhanced Electron-Hole Separation for High-Performance Hydrogen Evolution.

A bifunctional conjugated organic molecule 4-(aminomethyl) benzoic acid hydroiodide (AB) is designed and employed as an organic cation in organic-inorganic halide perovskite materials. Compared with the monofunctional cation benzylamine hydroiodide (BA) and the nonconjugated bifunctional organic molecule 5-ammonium valeric acid, devices based on AB-MAPbI3 show a good stability and a superior power conversion efficiency of 15.6% with a short-circuit current of 23.4 mA cm-2 , an open-circuit voltage of 0.94 V, and a fill factor of 0.71. The bifunctional conjugated cation not only benefits the growth of perovskite crystals in the mesoporous network, but also facilitates the charge transport. This investigation helps explore new approaches to rational design of novel organic cations for perovskite materials.

Improved Performance of Printable Perovskite Solar Cells with Bifunctional Conjugated Organic Molecule

Printable mesoscopic perovskite solar cells (PMPSCs) have exhibited great attractive prospects in the energy conversion field due to their high stability and potential scalability. However, the thick perovskite film in the mesoporous layers challenges the charge transportation and increase grain boundary defects, limiting the performance of the PMPSCs. It is critical not only to improve the electric property of the perovskite film but also to passivate the charge traps to improve the device performance. Herein we synthesized a bis-adduct 2,5-(dimethyl ester) C60 fulleropyrrolidine (bis-DMEC60) via a rational molecular design and incorporated it into the PMPSCs. The enhanced chemical interactions between perovskite and bis-DMEC60 improve the conductivity of the perovskite film as well as elevate the passivation effect of bis-DMEC60 at the grain boundaries. As a result, the fill factor (FF) and power conversion efficiency (PCE) of the PMPSCs containing bis-DMEC60 reached 0.71 and 15.21%, respectively, signi...

A Multifunctional Bis-Adduct Fullerene for Efficient Printable Mesoscopic Perovskite Solar Cells.

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Kai Du

Author Tools

Chat about Author

Papers

Improved Performance of Printable Perovskite Solar Cells with Bifunctional Conjugated Organic Molecule

A Multifunctional Bis-Adduct Fullerene for Efficient Printable Mesoscopic Perovskite Solar Cells.