A switch, switched architecture and process for transferring data through an FCAL switch is disclosed. The switch uses multiple switch control circuits each coupled to one FCAL network and all connected to a crossbar switch. The switch control circuits are coupled together by a protocol bus for coordination purposes. Local conversations can occur on each FCAL loop and crossing conversations through the switch can occur concurrently. The OPN primitive is used to establish the connection before any data is transferred thereby eliminating the need for buffer memory in the switch control circuits. The destination address of each OPN is used to address a lookup table in each switch control circuit to determine if the destination node is local. If not, the destination is looked up and a connection request made on the protocol bus. If the remote port is not busy, it sends a reply which causes both ports to establish a data path through the backplane crossbar switch.

Fibre channel arbitrated loop bufferless switch circuitry to increase bandwidth without significant increase in cost

Radio frequency integrated circuits (RFICs) are the building blocks that enable every device from cable television sets to mobile telephones to transmit and receive signals and data. This newly revised and expanded edition of the 2003 Artech House classic, "Radio Frequency Integrated Circuit Design", serves as an up-to-date, practical reference for complete RFIC know-how. The second edition includes numerous updates, including greater coverage of CMOS PA design, RFIC design with on-chip components, and more worked examples with simulation results. By emphasizing working designs, this book practically transports readers into the authors' own RFIC lab so they can fully understand how these designs function. This title is suitable for radio frequency integrated circuit (RFIC) design engineers; radio systems architects; researchers and developers of RFIC technology; and, graduate level electrical engineering students.

Radio Frequency Integrated Circuit Design

A fully integrated, programmable mixed-signal transceiver comprising a radio frequency integrated circuit (RFIC) which is frequency and protocol agnostic with digital inputs and outputs, the transceiver being programmable and configurable for multiple radio frequency bands and standards and being capable of connecting to many networks and service providers. The RFIC does not use spiral inductors and instead includes transmission line inductors allowing for improved scalability. Components of the transceiver are programmable to allow the transceiver to switch between different frequency bands of operating. Frequency switching can be accomplished though the content of digital registers coupled to the components.

Programmable radio transceiver

In a wireless power supply system, a first capacitor is arranged in series with an antenna. A second capacitor and a switch are arranged in series on a path arranged in parallel with the first capacitor. A control unit adjusts the duty ratio of the switch according to the frequency of an electric power signal.

Wireless power receiving apparatus

A phase-locked loop (PLL) with a fast-locked discriminator-aided phase detector (DAPD) is presented. Compared with the conventional phase detector (PD), the proposed fast-locked PD reduces the PLL pull-in time and enhances the switching speed, while maintaining better noise bandwidth. The synthesizer has been implemented in a 0.35-/spl mu/m CMOS process, and the output phase noise is -99 dBc/Hz at 100-kHz offset. Under the supply voltage of 3.3 V, its power consumption is 120 mW.

Fast-switching frequency synthesizer with a discriminator-aided phase detector

A 1.2 GHz dual-modulus prescaler IC fabricated with 0.8 /spl mu/m CMOS technology is presented in this paper. The dual-modulus prescaler includes a synchronous counter (divide-by-4/5) and an asynchronous counter (divide-by-32). A new dynamic D-flip-flop (DFF) is developed for the high-speed synchronous counter. The maximum operating frequency of 1.22 GHz with power consumption of 25.5 mW has been measured at 5 V supply voltage.

A 1.2 GHz CMOS dual-modulus prescaler using new dynamic D-type flip-flops

A wireless or wired communication system and method is provided including a transmitter and a receiver. A RF communication system in accordance with the present invention includes an apparatus and gain control method between RF receiver (803) and baseband modem (804) in case of a plurality of gain stages (830, 846, 862) inside a receiver (803). The gain of each stage (830, 846, 862) can be controlled by an integrated gain controller (828). The gain controller (828) monitors the signal level of each gain stage (830, 846, 862) to place its gain to optimal value. The gain control apparatus and method can be implemented in a digital AGC system. The gain controller (828) accepts a signal (826) implementing gain control and thus there is no stability issue. When distributed gain stages are present inside a related art receiver and separate gain control loops are used, stability issues can arise.

Automatic gain control method for highly integrated communication receiver

A fully integrated CMOS frequency synthesizer for PCS- and cellular-CDMA systems is integrated in a 0.35-/spl mu/m CMOS technology. The proposed charge-averaging charge pump scheme suppresses fractional spurs to the level of noise, and the improved architecture of the dual-path loop filter makes it possible to implement a large time constant on a chip. With current-feedback bias and coarse tuning, a voltage-controlled oscillator (VCO) enables constant power and low gain of the VCO. Power dissipation is 60 mW with a 3.0-V supply. The proposed frequency synthesizer provides 10-kHz channel spacing with phase noise of -121 dBc/Hz in the PCS band and -127 dBc/Hz in the cellular band, both at 1-MHz offset frequency.

A fully integrated CMOS frequency synthesizer with charge-averaging charge pump and dual-path loop filter for PCS- and cellular-CDMA wireless systems

This paper presents a full-CMOS transmitter and receiver for 2.0-GHz wide-band code division multiple access with direct conversion mixers and a DC-offset cancellation scheme. The direct conversion scheme combined with a multiphase sampling fractional-N prescaler alleviates the problems of the direct conversion transmitter and receiver. Digital gain control is merged into the baseband filters and variable-gain amplifiers to optimize the linearity of the system, reduce the noise, and improve the sensitivity. Variable-gain amplifiers with DC-offset cancellation loop eliminate the DC-offset in each stage. The chip implemented in 0.35-/spl mu/m CMOS technology shows the experimental results of 6 dBm maximum output power with 38-dB adjacent channel power rejection ratio at 1.92 MHz, 50-dB dynamic range, and 363-mW power consumption in the transmitter. The receiver shows -115.4 dBm sensitivity, a 4.0-dB noise figure, and a dynamic range of 80-dB with 396-mW power consumption.

Full-CMOS 2-GHz WCDMA direct conversion transmitter and receiver

A single chip RF communication system and method is provided including a transmitter and a receiver The RF communication system in accordance with the present invention can include an antenna that receives/transmits RF signals, a PLL that generates multi-phase clock signals having a frequency different from a carrier frequency and a reference signal having the carrier frequency, a demodulation-mixer that mixes the received RF signals with the multi-phase clock signals having the frequency different from the carrier frequency to output signals having a frequency reduced relative to the carrier frequency, two stage amplification that amplifies a selected channel signal to a required dynamic level, and an A/D converting unit for converting the RF signals from the mixing unit into digital signals The two stage amplification can provide the selected channel signal with sufficient gain, even when an adjacent channel signal is output by the demodulation mixer with greater amplitude or power

Single chip cmos transmitter/receiver and method of using same

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Joonbae Park

Author Tools

Chat about Author