John G. Brisson
Massachusetts Institute of Technology
63 Papers
226 Citations
John G. Brisson is an academic researcher from Massachusetts Institute of Technology. The author has contributed to research in topics: Condenser (heat transfer) & Heat sink. The author has an hindex of 12, co-authored 61 publications.
Chat about Author
Papers
Analysis of oxy-fuel combustion power cycle utilizing a pressurized coal combustor
Jongsup Hong,Gunaranjan Chaudhry,John G. Brisson,Randall P. Field,Marco Gazzino,Ahmed F. Ghoniem +5 more
TL;DR: In this paper, an oxy-fuel combustion power cycle that utilizes a pressurized coal combustor is analyzed and it is shown that this approach recovers more thermal energy from the flue gases.
305
Design of an Integrated Loop Heat Pipe Air-Cooled Heat Exchanger for High Performance Electronics
Teresa B. Peters,Matthew McCarthy,J. Allison,F. A. Dominguez-Espinosa,David Jenicek,H. A. Kariya,Wayne L. Staats,John G. Brisson,Jeffrey H. Lang,Evelyn N. Wang +9 more
TL;DR: In this paper, the authors present the design of a new high-performance heat exchanger capable of transferring 1000 W while consuming less than 33 W of input electrical power and having an overall thermal resistance of 0.05 K/W.
76
Effect of fabrication parameters on the thermophysical properties of sintered wicks for heat pipe applications
TL;DR: In this article, the effect of fabrication parameters (particle size and sintering conditions) on porosity, liquid permeability, capillary pressure and thermal conductivity of sintered wicks is studied.
60
Method for customizing an organic Rankine cycle to a complex heat source for efficient energy conversion, demonstrated on a Fischer Tropsch plant
TL;DR: In this paper, the authors present a set of ORC design concepts: reheat stages, multiple pressure levels, and balanced recuperators, and demonstrate the use of these design concepts as building blocks to create a customized cycle that matches an available heat source.
54
The thermal conductivity of Kapton HN between 0.5 and 5 K
TL;DR: In this article, the thermal conductivity of Kapton HN is measured for temperatures between 0.5 and 5 K. The measured conductivity was found to fit to a power law of the form k = 4.638×10 −5 T 0. 5678 W/cm K, where T is in Kelvins.
39