Advances in solid state white lighting technologies witness the explosive development of phosphor materials (down-conversion luminescent materials). A large amount of evidence has demonstrated the revolutionary role of the emerging nitride phosphors in producing superior white light-emitting diodes for lighting and display applications. The structural and compositional versatility together with the unique local coordination environments enable nitride materials to have compelling luminescent properties such as abundant emission colors, controllable photoluminescence spectra, high conversion efficiency, and small thermal quenching/degradation. Here, we summarize the state-of-art progress on this novel family of luminescent materials and discuss the topics of materials discovery, crystal chemistry, structure-related luminescence, temperature-dependent luminescence, and spectral tailoring. We also overview different types of nitride phosphors and their applications in solid state lighting, including general ...

Down-Conversion Nitride Materials for Solid State Lighting: Recent Advances and Perspectives.

Solid‐state lighting is advancing toward higher power, higher brightness, and smaller size to cope with the market competitiveness, and laser‐driven solid‐state lighting technology is springing up owing to its super‐high brightness and compactness. These developments put forward new requirements for color conversion materials (i.e., phosphors). Here, the state‐of‐art achievements in laser phosphors are summarized, and the topics of luminescence saturation, light extraction efficiency, and light uniformity encountered in laser lighting technology are discussed. Several typical types of color converters, such as single crystal, phosphor ceramics, phosphor‐in‐glass, phosphor films, and quantum‐well light‐emitting diodes, are comparatively overviewed and discussed. The cutting‐edge applications of high‐brightness white laser light in lighting, displays, healthcare, and communications are summarized. The challenges and outlook in laser‐driven solid‐state lighting and some empirical rules for designing novel laser phosphors are highlighted.

Color Conversion Materials for High-Brightness Laser-Driven Solid-State Lighting

Superhigh brightness, reliability, and modularization are three key features of state-of-the-art high-brightness solid state lighting, such as high-power white light-emitting diodes (white LEDs) and white laser diodes (white LDs). However, these features are inevitably limited by the organic resin packing material, as a crucial component of the white lighting device, because of its unstable property at high temperature and low thermal conductivity. Here, we report a robust light convertor that can simultaneously play key roles as a phosphor and an alternative encapsulating material via phosphor-in-glass (PiG) engineering. We employed a combination of powder X-ray diffraction, scanning electron microscope, energy dispersive spectrometer (EDS), EDS mapping, confocal laser scanning microscope, cathodoluminescence mapping, in conjunction with micro-PL system with a point-by-point scanning mode to study the detailed structure of PiG samples. This Y3Al5O12:Ce3+-based PiG exhibits a high external quantum efficie...

All-Inorganic Light Convertor Based on Phosphor-in-Glass Engineering for Next-Generation Modular High-Brightness White LEDs/LDs

Electronic cigarette-generated mainstream aerosols were characterized in terms of particle number concentrations and size distributions through a Condensation Particle Counter and a Fast Mobility Particle Sizer spectrometer, respectively. A thermodilution system was also used to properly sample and dilute the mainstream aerosol.

Different types of electronic cigarettes, liquid flavors, liquid nicotine contents, as well as different puffing times were tested. Conventional tobacco cigarettes were also investigated.

The total particle number concentration peak (for 2-s puff), averaged across the different electronic cigarette types and liquids, was measured equal to 4.39 ± 0.42 × 109 part. cm−3, then comparable to the conventional cigarette one (3.14 ± 0.61 × 109 part. cm−3). Puffing times and nicotine contents were found to influence the particle concentration, whereas no significant differences were recognized in terms of flavors and types of cigarettes used.

Particle number distribution modes of the electronic cigarette-generated aerosol were in the 120–165 nm range, then similar to the conventional cigarette one.

Influential parameters on particle concentration and size distribution in the mainstream of e-cigarettes

When heated by an electronic cigarette, propylene glycol and glycerol produce a nicotine-carrying-aerosol. This hygroscopic/hyperosmolar aerosol can deposit deep within the lung. Whether these depo...

/pdf/fourth-generation-e-cigarette-vaping-induces-transient-lung-1ais63m21s.pdf

Fourth generation e-cigarette vaping induces transient lung inflammation and gas exchange disturbances: results from two randomized clinical trials

Energy efficiency and lighting quality considerations are driving research into laser-pumped white light sources. Laser diodes as pump sources for downconversion phosphors promise freedom from "droop" that adversely affects the efficiency of light-emitting diodes (LEDs). High-intensity laser diode-pumped light sources for applications such as search lights and automobile headlights have been demonstrated recently. Our paper describes the design and construction of a domestic/office-type solid-state luminaire driven by light from an integrated violet laser-diode module. A trichromatic phosphor made from a blend of separate europium-containing rare-earth phosphors was used as the downconversion medium. Mechanical and optical design of the reflector and the phosphor plate are described. Characteristics of both the pump light and the downconverted light are also described. Our studies also looked at the variation of chromaticity coordinates with variation in pump power and the effect of laser speckle on the lamp's light output. Finally, there is a brief discussion of energy conversion efficiency and longevity considerations, comparing pumping with LEDs versus pumping with laser diodes.

Laser-driven phosphor-converted white light source for solid-state illumination

A review of polymethyl methacrylate (PMMA) as a versatile lithographic resist – With emphasis on UV exposure

Polymethyl methacrylate (PMMA) is widely used as an electron beam resist but is not used as a photoresist because of its insensitivity to electromagnetic radiation with wavelengths longer than about 300 nm. In this paper we describe a technique for performing conventional photolithography with high molecular weight PMMA at the widely used 365 nm i-line wavelength. The technique involves photosensitizing PMMA with Irgacure 651—a commercially available photo-initiator that can cause PMMA strands to cross-link. Optimum amount of Irgacure can produce a negative tone photoresist with adequate photosensitivity and plasma etch resistance. We describe this technique in detail with complete processing conditions and discuss the effects of varying Irgacure 651 concentration in PMMA as well as changes in UV exposure dose. We also show example structures patterned with commonly available materials and equipment. Finally, we show that it is possible to carry out gradient lithography with this approach, in order to produce structures in relief in photosensitive PMMA.

http://iopscience.iop.org/article/10.1088/0268-1242/31/2/025010/pdf

Photolithography with polymethyl methacrylate (PMMA)

Despite their growing popularity, the potential respiratory toxicity of electronic cigarettes (e-cigarettes) remains largely unknown. One potential aspect of e-cigarette toxicity is the effect of e-cigarette vapor on lung surfactant function. Lung surfactant is a mixture of lipids and proteins that lines the alveolar region. The surfactant layer reduces the surface tension of the alveolar fluid, thereby playing a crucial role in lung stability. Due to their small size, particulates in e-cigarette vapor can penetrate the deep lungs and come into contact with the lung surfactant. The current study sought to examine the potential adverse effects of e-cigarette vapor and conventional cigarette smoke on lung surfactant interfacial properties. Infasurf®, a clinically used and commercially available calf lung surfactant extract, was used as lung surfactant model. Infasurf® films were spread on top of an aqueous subphase in a Langmuir trough with smoke particulates from conventional cigarettes or vapor from different flavors of e-cigarettes dispersed in the subphase. Surfactant interfacial properties were measured in real-time upon surface compression while surfactant lateral structure after exposure to smoke or vapor was examined using atomic force microscopy (AFM). E-cigarette vapor regardless of the dose and flavoring of the e-liquid did not affect surfactant interfacial properties. In contrast, smoke from conventional cigarettes had a drastic, dose-dependent effect on Infasurf® interfacial properties reducing the maximum surface pressure from 65.1 ± 0.2 mN/m to 46.1 ± 1.3 mN/m at the highest dose. Cigarette smoke and e-cigarette vapor both altered surfactant microstructure resulting in an increase in the area of lipid multilayers. Studies with individual smoke components revealed that tar was the smoke component most disruptive to surfactant function. While both e-cigarette vapor and conventional cigarette smoke affect surfactant lateral structure, only cigarette smoke disrupts surfactant interfacial properties. The surfactant inhibitory compound in conventional cigarettes is tar, which is a product of burning and is thus absent in e-cigarette vapor.

/pdf/electronic-cigarette-vapor-alters-the-lateral-structure-but-6bt23bmy3v.pdf

Electronic cigarette vapor alters the lateral structure but not tensiometric properties of calf lung surfactant.

Laser excitation of red, green, blue and trichromatic white rare-earth phosphors for solid-state lighting applications

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Jason T. Wright

Author Tools

Chat about Author