Recent research advances in the dynamic behavior of shells: 1989-2000, Part 1: Laminated composite shells

The assessment of creep damage in steels employed in the power generation industry is usually carried out by means of replica metallography, but the several shortcomings of this method have prompted a search for alternative or complementary non-destructive techniques, ranging from ultrasonic to electromagnetic methods, hardness measurements and nuclear techniques. A critical review of the main results obtained to date in the secondary and tertiary stages of creep is presented in this paper, and the advantages and disadvantages of each method are discussed. Ultrasonic and potential drop techniques appear to be the most promising, but further research is needed before they are fully mature for deployment in the field.

A review of non-destructive techniques for the detection of creep damage in power plant steels

A remote, non-contact system for detecting a defect in a railroad wheel as the wheel is stationary or moving along a railroad track includes; (1) a pulsed, laser light source for generating an ultrasonic wave in the wheel, the ultrasonic wave having a direct portion and reflected and transmitted portions if the direct portion encounters a defect in the wheel, (2) an optical component in the path of the light from the light source for forming the light into a specified illumination pattern so that the generated ultrasonic wave has a specified wavefront, (3) an air-coupled transducer or a group of transducers for sensing the acoustic signal emanating from the wheel that results from the ultrasonic wave traveling through the wheel, and (4) a signal processor, responsive to the sensed acoustic signal, capable of distinguishing whether the sensed signal has a component that indicates the existence of a reflected portion in the ultrasonic wave, wherein the presence of such a component in the acoustic signal indicates the existence of a defect in the railroad wheel.

Laser-air, hybrid, ultrasonic testing of railroad wheels

https://www.fpl.fs.fed.us/documnts/fplgtr/fplgtr134.pdf

Acoustic emission and acousto-ultrasonic techniques for wood and wood-based composites: a review

The acousto-ultrasonic technique has many potential applications in the NDE of composite materials. However, problems of poor reproducibility and of the sensitivity of the results to precise instrument settings have restricted its application in industry The waves employed in acousto-ultrasonics are chiefly Lamb waves which propagate in the plane of the laminate. In this paper, Lamb wave propagation in composite laminates both with and without defects is investigated both numerically and experimentally. Acousto-ultrasonic parameters based on both predicted and measured responses are calculated, and tests are carried out using a commercially available instrument. The factors which lead to the poor reproducibility of acousto-ultrasonic results are discussed and possible improvements to the technique are proposed.

Lamb wave propagation in composite laminates and its relationship with acousto-ultrasonics

Acoustoultrasonic (AU) measurements were performed on a series of (0)8, (90)8, (+/-30)2s, (+/-60)2s, (0/90)2s, and (90/0)2s tensile specimens composed of eight laminated layers of continuous, SiC-fiber-reinforced Ti-15-3 matrix. The frequency spectrum was dominated by frequencies of longitudinal wave resonance through the thickness of the specimen at the sending transducer; signal propagation from the sender to the receiver was by shear waves. The magnitude of the frequency spectrum of the AU signal was used for calculating a stress-wave factor (SWF) based upon integrating the spectral distribution function. The SWF was sensitive to fiber-matrix debonding caused by mechanical strain and also to unconstrained thermal cycling. Damage in this metal-matrix composite structure due to tensile loading or thermal cycling was detected by this change in the magnitude of the frequency spectrum.

Preliminary investigation of acousto-ultrasonic evaluation of metal-matrix composite specimens

Due to elevated temperatures and excessive stresses, turbine components may experience creep behavior. As a result, it is desirable to monitor and assess the current condition of such components. This study employed the Acousto-Ultrasonics (AU) method in an effort to monitor the state of the material at various percentages of used up creep life in the nickel base alloy, Udimet 520. A stepped specimen (i.e., varying cross sectional area) was employed which allowed for a postmortem nondestructive evaluation (NDE) analysis of the various levels of used up life. The overall objectives here were two fold: First, a user friendly, graphical interface AU system was developed, and second the new AU system was applied as an NDE tool to assess distributed damage resulting from creep. The experimental results demonstrated that the AU method shows promise as an NDE tool capable of detecting material changes as a function of used up creep life. Furthermore, the changes in the AU parameters were mainly attributed to the case of combined load and elevated temperature (i.e., creep) and not simply because of a timed exposure at elevated temperature (i.e., heat treatment or thermal aging).

/pdf/damage-assessment-of-creep-tested-and-thermally-aged-udimet-4jhdebaqx4.pdf

Damage Assessment of Creep Tested and Thermally Aged Udimet 520 Using Acousto-Ultrasonics

It has been established that the stress-wave factor (SWF) calculated from acousto-ultrasonic (AU) signals is sensitive to mechanical properties in composite structures.1–13 In particular, it was shown1 that SWF was sensitive to interlaminar shear strength (ISS) in graphite/epoxy.

/pdf/ray-propagation-path-analysis-of-acousto-ultrasonic-signals-j0woduh0sg.pdf

Ray propagation path analysis of acousto-ultrasonic signals in composites

Lamb waves can be produced and detected in ceramic matrix composites (CMC) and metal matrix composites (MMC) plates using the acousto-ultrasonic configuration employing broadband transducers. Experimental dispersion curves of lowest symmetric and lowest antisymmetric modes behave in a manner analogous to the graphite/polymer theoretical curves. In this study a basis has been established for analyzing Lamb wave velocities for characterizing composite plates. Lamb wave dispersion curves and group velocities were correlated with variations in axial stiffness and shear stiffness in MMC and CMC. For CMCs, interfacial shear strength was also correlated with the first antisymmetric Lamb mode.

/pdf/detecting-lamb-waves-with-broadband-acousto-ultrasonic-4qo4drp9yz.pdf

Detecting lamb waves with broadband acousto-ultrasonic signals in composite structures

Surface topography is an important variable in the performance of many industrial components and is normally measured with diamond tip profilometry over a small area or by using optical scattering methods for larger area measurement. This article shows quantitative surface topography profiles as obtained using 1 MHz focused air coupled ultrasonic pulses. The profiles were obtained using a system developed by NASA Glenn Research Center and Sonix, Inc., via a formal cooperative agreement. The method is simple and reproducible because it relies mainly on knowledge and constancy of the sound velocity through the air. The air transducer is scanned across the surface and sends pulses to the sample surface where they are reflected back from the surface along the same path as the incident wave. Time of flight images of the sample surface are acquired and converted to depth/surface profile images using the simple relation (d = V x t/2) between distance d, time of flight t and the velocity of sound in air V. In this article, resolution is determined and results are shown for platelike and cylindrical (curved) samples, Impressive results were obtained for all samples when compared with diamond tip profiles and measurements from micro thickness gages. The method is completely nondestructive, noninvasive, noncontact and does not require light reflective surfaces.

Three dimensional surface depression profiling using focused air coupled ultrasonic pulses

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Harold E. Kautz

Author Tools

Chat about Author