A Reconfigurable Multifunctional Metasurface for Full-Space Control of Electromagnetic Waves

Intelligent microwave absorption (MA) materials possess the ability to dynamically change their microwave absorption performance, according to real‐time requirements, and it is of great significance in future civil and military fields. For the first time, the reduced graphene oxide/VO2 composite aerogels are developed with off/on switchable MA performance, and the switchable mechanism is originated from the unique phase change behavior of VO2. As temperature increases (>68 °C), the VO2 displays the phase change from monoclinic to rutile phase, which accompanies with significant changes in aerogel's electrical conductivity as well as its permittivity, and consequently leads to off/on switchable MA performance. Particularly, two different off/on switch modes, “on to off” and “off to on”, can be separately realized by different composite aerogels as temperature increases, and this off/on switchable MA performance is also confirmed with good cycling stability. More importantly, during the off/on switch process, the maximum changes for the effective absorption bands (ΔEAB) and RL values (ΔRL) can be as high as 7.27 GHz and 49 dB, which exceeds most current reports. Besides, the RCS simulations on aircrafts have been performed and verified this intelligent MA performance, thus providing useful guidance for next‐generation smart electromagnetic devices in various fields.

Intelligent Off/On Switchable Microwave Absorption Performance of Reduced Graphene Oxide/VO2 Composite Aerogel

Beam scanning antenna brings new opportunities to reduce the data collision of multi-node communication in the Internet of Things (IoT). This paper proposes a new type antenna design scheme that can be used for IoT relay communication. A programmable beam scanning antenna without phase shifters operating in the X-band is designed to evaluate the feasibility of this scheme. The integrated design of excitation source and phasemodulated structure greatly reduces the profile of the antenna and improves the integrated degrees of freedom with other equipment. By switching the state of the PIN diode loaded on each element, different radiators can be selected and the direction of current polarization on elements can be adjusted to change the radiation phase. Furthermore, the diode states are encoded by the holographic antenna theory and controlled by the FPGA controller to realize programmable beam scanning. One element, two-element and 1-D array containing 32 elements are fabricated and measured. Experimental results are in good agreement with the simulation data. The operating bandwidth is 7.5% at 10GHz while the beam scanning range of the array is -60∘ 60∘, with a good scanning accuracy and stability. The proposed low-profile beam scanning antenna can provide stable communication services to multiple users and smart devices as a new type of beam scanning array antenna solution for the IoT application, which is beneficial to this field.

A Low-profile Programmable Beam Scanning Holographic Array Antenna without Phase Shifters

Abstract Combining 3D printing with precursor-derived ceramic for fabricating electromagnetic (EM) wave-absorbing metamaterials has attracted great attention. This study presents a novel ultraviolet-curable polysiloxane precursor for digital light processing (DLP) 3D printing to fabricate ceramic parts with complex geometry, no cracks and linear shrinkage. Guiding with the principles of impedance matching, attenuation, and effective-medium theory, we design a cross-helix-array metamaterial model based on the complex permittivity constant of precursor-derived ceramics. The corresponding ceramic metamaterials can be successfully prepared by DLP printing and subsequent pyrolysis process, achieving a low reflection coefficient and a wide effective absorption bandwidth in the X-band even under high temperature. This is a general method that can be extended to other bands, which can be realized by merely adjusting the unit structure of metamaterials. This strategy provides a novel and effective avenue to achieve “target-design-fabricating” ceramic metamaterials, and it exposes the downstream applications of highly efficient and broad EM wave-absorbing materials and structures with great potential applications. 

/pdf/digital-light-processing-3d-printed-ceramic-metamaterials-h29ra055.pdf

Digital Light Processing 3D-Printed Ceramic Metamaterials for Electromagnetic Wave Absorption

Improving the atom utilization of metals and clarifying the M-M' interaction is both greatly significant in assembling high-performance ultra-light electromagnetic wave-absorbing materials. Herein, a high-temperature explosion strategy has been successfully applied to assemble the hierarchical porous carbon sponge with Co-Fe decoration via the pyrolysis of the energetic metal organic framework. The as-constructed hybrid displays a superior reflection loss (RL) value of - 57.7 dB and a specific RL value of - 192 dB mg-1 mm-1 at 12.08 GHz with a layer thickness of 2.0 mm (loading of 15 wt%). The off-axis electron hologram characterizes the highly distributed numerous polarized nanodomain variable capacitors, demonstrating the dipole and interfacial polarization along the edges of the nanopores. More importantly, the X-ray absorption spectroscopy analysis verifies the mutual interaction between the metal cluster and carbon matrix and the electronic coupling responsible for the greatly improved electromagnetic wave absorption. 

/pdf/ultrahigh-density-of-atomic-cofe-electron-synergy-in-37m5sszl.pdf

Ultrahigh Density of Atomic CoFe-Electron Synergy in Noncontinuous Carbon Matrix for Highly Efficient Magnetic Wave Adsorption

Information metasurfaces have attracted much attention in recent years due to the capability to link the physical world and information science. However, most of the current information metasurfaces are either phase-only coding or amplitude-only coding, limiting their functions and applications. Here, a broadband and programmable amplitude-phase-joint-coding (APJC) information metasurface is proposed and experimentally demonstrated, from which the phase and amplitude of reflected electromagnetic waves can be independently controlled by adjusting the bias voltage of PIN diode integrated in the meta-atom. In particular, the reflection amplitude can be continuously controlled from 0.1 to 0.9, and the reflection phase can be switched between two states with about 180° phase difference. Thus, the proposed metasurface is capable of realizing independent 1-bit or multibit amplitude coding and 1-bit phase coding, and both of them can be reprogrammed in real time in broad band from 8 to 13 GHz. The abilities of the programmable APJC information metasurface in manipulating the electromagnetic waves are demonstrated by both numerical simulations and experiments, including to suppress the sidelobes of scattering beam, generate the diffractive waves with arbitrary magnitudes, and so on. These results show unique advantages of APJC information metasurface in real-time independent controls of energy allocation and wavefront tailoring of the electromagnetic waves in a wide frequency band.

Broadband and Programmable Amplitude-Phase-Joint-Coding Information Metasurface.

Programmable and information metasurfaces have shown great potentials in wireless communications, but there are few reports on encrypted communications. In this paper, a programmable polarization‐modulated (PoM) information metasurface is proposed, which can not only customize arbitrarily linearly polarized reflected waves, but also modulate their amplitudes in real time. Based on this feature, a physical‐level wireless communication encryption scheme is presented and experimentally demonstrated by introducing a meta‐key, which can be encrypted and sent by the programmable PoM information metasurface. To be specific, the key is encoded and concealed into different linear polarization channels, and then modulated and transmitted by the information metasurface at the transmitting end. At the receiving end, the modulated signal can be received and decoded by using a pair of polarization discrimination antennas. A wireless transceiver system is established to verify the feasibility of the scheme. It is shown that, once the meta‐key is obtained, the corresponding encrypted target information that has been sent to the user in advance can be recovered.

https://onlinelibrary.wiley.com/doi/pdfdirect/10.1002/advs.202204333

A Polarization‐Modulated Information Metasurface for Encryption Wireless Communications

Polarization plays an important role in practical applications, and hence it is an essential task to generate the desired polarization of a spatial propagating wave (SPW). Here, the authors propose a method to design radiation metasurface, or metasurface emitter, which can produce arbitrarily polarized SPW. Different from the conventional transmission and reflection metasurfaces that can only manipulate the incoming spatial wave, the proposed radiation metasurface can be regarded as an electromagnetic (EM) wave emitter that can generate SPW by itself. More importantly, the polarization of the generated SPW can be flexibly customized by designing the phase distribution on metasurface. The metasurface is fed by a monopole antenna, and the energy is first coupled into the metasurface to form a surface wave. Modulated by the metasurface, the surface wave is then converted into SPW. As a proof of concept, they design and fabricate the radiation metasurfaces that are capable of generating radially, azimuthally, linearly, and circularly polarized SPWs, as well as dual‐beam radiations with different polarizations, respectively. The measured results have a good match to the theoretical predictions and full‐wave simulations. The proposed method provides an efficient way to generate SPWs with any desired polarizations for easy integration.

High‐Efficiency Metasurface Emitters for Generating Arbitrarily Polarized Spatial Propagating Waves

Hand gesture plays an important role in many circumstances, which is one of the most common interactive methods in daily life, especially for disabled people. Human-machine interaction is another popular research topic to realize direct and efficient control, making machines intelligent and maneuverable. Here, a special human-machine interaction system is proposed and namedas computer-vision (CV) based gesture-metasurface interaction (GMI) system, which can be used for both direct beam manipulations and real-time wireless communications. The GMI system first needs to select its working mode according to the gesture command to determine whether to perform beam manipulations or wireless communications, and then validate the permission for further operation by recognizing unlocking gesture to ensure security. Both beam manipulation and wireless communication functions are validated experimentally, which show that the GMI system can not only realize real-time switching and remote control of different beams through gesture command, but also communicate with a remote computer in real time by translating the gesture language to text message. The proposed non-contact GMI system has the advantages of good interactivity, high flexibility, and multiple functions, which can find potential applications in community security, gesture-command smart home, barrier-free communications, and so on.

Computer-Vision Based Gesture-Metasurface Interaction System for Beam Manipulation and Wireless Communication.

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Hai Lin Wang

Author Tools

Chat about Author