Design and Analysis ofFault-Tolerant Digital Systems: B. W. JOHNSON (Addison Wesley, 1989,577 pp., £41.35) The book provides an introduction to the important aspects of designing fault-tolerant systems, and an evaluation of how well the reliability goals have been achieved. The book is mainly oriented towards a final year undergraduate course on fault-tolerant computing, primarily with an implementation bias. In chapters 1 and 2, definitions and basic terminology are covered, which sets the stage for the remaining chapters, and provides the background and motivation for the remainder of the book. Chapter 3 provides a thorough analysis of fault-tolerance techniques and concepts. This chapter in particular is remarkably well written, covering the issues of hardware and information redundancy, which form the mainstay offault-tolerant computing. Subsequent chapters on the use and evaluation of the various approaches illustrate the principles as they have been put into practice. At the end of chapter 5, small projects that allow the reader to apply the material presented in the preceding chapters are included. The resurgence of interest in fault-tolerance with the emergence of VLSI is the theme of chapter 6, focussing on designing fault-tolerant systems in a VLSI environment. The problems and opportunities presented by VLSI are discussed and the use of redundancy techniques in order to enhance manufacturing yield and to provide in-service reliability are reviewed. The final chapter covers testing, design for testability and testability analysis, which must be considered during each phase of the design process to guarantee that resulting designs can be thoroughly tested. Each chapter is followed by a summary of the key issues and concepts presented therein, and a separate list of references, which makes it easily readable. In addition, there is a reading list with more comprehensive and specialised references devoted to each chapter. Overall, the book is well written, and contains a great deal of information in 577 pages. The book has a definite implementation bias, and draws considerably on the author's experience in industry, particularly reflected in the projects accompanying chapter 5. The book should be a useful addition to a library, and a suitable text to accompany a lecture course on fault-tolerant computing. R. RAMASWAMI, Department ofComputation, UMIST

Book Review: Design and Analysis of Fault-Tolerant Digital SystemsDesign and Analysis of Fault-Tolerant Digital Systems: JohnsonB. W. (Addison Wesley, 1989, 577 pp., £41.35)

Analog signal processing is fast and can address real world problems. The applications of battery powered analog and mixed mode electronic devices require designing analog circuits to operate at low voltage levels. In this paper, some of the issues facing analog designers in implementing low voltage circuits are discussed, and possible low voltage design techniques are examined. The authors describe briefly almost all low voltage design techniques suitable for analog circuit structures along with their merits and demerits.

Low voltage analog circuit design techniques

This expanded and thoroughly revised edition of Thomas H. Lee's acclaimed guide to the design of gigahertz RF integrated circuits features a completely new chapter on the principles of wireless systems. The chapters on low-noise amplifiers, oscillators and phase noise have been significantly expanded as well. The chapter on architectures now contains several examples of complete chip designs that bring together all the various theoretical and practical elements involved in producing a prototype chip. First Edition Hb (1998): 0-521-63061-4 First Edition Pb (1998); 0-521-63922-0

The Design of CMOS Radio-Frequency Integrated Circuits: RF CIRCUITS THROUGH THE AGES

This study presents new low-power multiple-valued logic (MVL) circuits for nanoelectronics. These carbon nanotube field effect transistor (FET) (CNTFET)-based MVL circuits are designed based on the unique characteristics of the CNTFET device such as the capability of setting the desired threshold voltages by adopting correct diameters for the nanotubes as well as the same carrier mobility for the P- and N-type devices. These characteristics make CNTFETs very suitable for designing high-performance multiple- V th circuits. The proposed MVL circuits are designed based on the conventional CMOS architecture and by utilising inherently binary gates. Moreover, each of the proposed CNTFET-based ternary circuits includes all the possible types of ternary logic, that is, negative, positive and standard, in one structure. The method proposed in this study is a universal technique for designing MVL logic circuits with any arbitrary number of logic levels, without static power dissipation. The results of the simulations, conducted using Synopsys HSPICE with 32 nm-CNTFET technology, demonstrate improvements in terms of power consumption, energy efficiency, robustness and specifically static power dissipation with respect to the other state-of-the-art ternary and quaternary circuits.

https://ietresearch.onlinelibrary.wiley.com/doi/pdf/10.1049/iet-cdt.2013.0023

A universal method for designing low-power carbon nanotube FET-based multiple-valued logic circuits

A programming technique for controlling the floating gates (FGs) in ultra-low-voltage (ULV) floating-gate circuits is presented. Simple ULV PG current-scaling and level-shifting circuits are discussed. The current scaling and level shifting are accomplished using only minimum sized transistors and floating capacitors. Floating-gate current multiplier and divider circuits are described. Measured results are provided,.

Programming floating-gate circuits with UV-activated conductances

Ultra-low-voltage (ULV) floating-gate differential amplifiers are presented. In this paper, we present several different approaches to CMOS ULV amplifier design. Sinh-shaped and tanh-shaped transconductance amplifiers are described. Measured results are provided.

/pdf/ultra-low-voltage-floating-gate-transconductance-amplifiers-gm6hun29g0.pdf

Ultra-low-voltage floating-gate transconductance amplifiers

This paper presents a novel voltage mode Balanced Ternary Adder (BTA), implemented with Recharged Semi- Floating Gate Devices. By using balanced ternary notation, it possible to take advantage of carry free addition, which is exploited in designing a fast adder cell. The circuit operates at 1 GHz clock frequency. The supply voltage is only 1.0 Volt. The circuit is simulated by using Cadence R Analog Design Environment, with CMOS090 process parameters, a 90nm General Purpose Bulk CMOS Process from STMicroelectronics with 7 metal layers. All the capacitors are metal plate capacitors, based on vertical coupling capacitance between stacked metal plates.

/pdf/a-novel-balanced-ternary-adder-using-recharged-semi-floating-37r7qyy09n.pdf

A Novel Balanced Ternary Adder Using Recharged Semi-Floating Gate Devices

In this paper we present a new proposal for implementing a voltage-mode Multiple-Valued (MV) maximum or minimum function. The circuit has been implemented using Recharged Semi Floating-Gate (SFG) transistors. The benefit with this design is, the proposed circuits can easily be fabricated using a conventional CMOS process. The circuit is suitable for a low power design, V/sub dd/<2 volt. It has high noise margin and good linearity. The simulation results for the proposed circuit are evaluated using AMS 0.35 /spl mu/m CMOS device parameters.

Max and min functions using Multiple-Valued Recharged Semi-Floating Gate circuits

In this paper we present a novel voltage mode non-inverting CMOS semi floating-gate (SFG) ternary switching element. The design is applicable for reconstructing or refreshing ternary logic signals. The switching points are tuned using capacitive division. A preliminary simulation results from Cadence Spectre with AMS 0.35 /spl mu/m process parameters c35b4 is included.

A novel ternary switching element using CMOS recharge semi floating-gate devices

This paper presents an approach to programming threshold voltages in floating-gate CMOS circuits. The threshold voltage programming is exploited in ultra low-voltage (ULV) amplifier design. A threshold voltage programming scheme is presented and several examples of analog ULV circuits are described. The ULV circuits are used in ULV amplifier design. Measured data are provided.

Ultra Low-Voltage Floating-Gate (FGUVMOS) Amplifiers

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

H. Gundersen

Author Tools

Chat about Author