Grid integration of renewable energy (REN) requires efficient and reliable power conversion stages, particularly with an increasing demand for high controllability and flexibility seen from the grid side. Underpinned by advanced control and information technologies, power electronics converters play an essential role in large-scale REN generation. However, the use of power converters has also exposed several challenges in conventional power grids, e.g., reducing the system inertia. In this article, grid integration using power electronics is presented for large-scale REN generation. Technical issues and requirements are discussed with a special focus on grid-connected wind, solar photovoltaic, and energy storage systems. In addition, the core of the energy generation and conversion—control for individual power converters (e.g., general current control) and for the system level (e.g., coordinated operation of large-scale energy systems)—is briefly discussed. Future research perspectives are then presented, which further advance large-scale REN generation technologies by incorporating more power electronics systems. 

/pdf/power-electronics-technology-for-large-scale-renewable-ul494eb6.pdf

Power Electronics Technology for Large-Scale Renewable Energy Generation

In recent years, multilevel inverters (MLIs) have emerged to be the most empowered power transformation technology for numerous operations such as renewable energy resources (RERs), flexible AC transmission systems (FACTS), electric motor drives, etc. MLI has gained popularity in medium- to high-power operations because of numerous merits such as minimum harmonic contents, less dissipation of power from power electronic switches, and less electromagnetic interference (EMI) at the receiving end. The MLI possesses many essential advantages in comparison to a conventional two-level inverter, such as voltage profile enhancement, increased efficiency of the overall system, the capability of high-quality output generation with the reduced switching frequency, decreased total harmonic distortions (THD) without reducing the power of the inverter and use of very low ratings of the device. Although classical MLIs find their use in various vital key areas, newer MLI configurations have an expanding concern to the limited count of power electronic devices, gate drivers, and isolated DC sources. In this review article, an attempt has been made to focus on various aspects of MLIs such as different configurations, modulation techniques, the concept of new reduced switch count MLI topologies, applications regarding interface with renewable energy, motor drives, and FACTS controller. Further, deep insights for future prospective towards hassle-free addition of MLI technology towards more enhanced application for various fields of the power system have also been discussed. This article is believed to be extremely helpful for academics, researchers, and industrialists working in the direction of MLI technology.

Multilevel Inverter: A Survey on Classical and Advanced Topologies, Control Schemes, Applications to Power System and Future Prospects

Experimental investigation of theoretical stability regions for ultra-low frequency oscillations of hydropower generating systems

Grid integration of renewable energy (REN) requires efficient and reliable power conversion stages, particularly with an increasing demand for high controllability and flexibility seen from the grid side. Underpinned by advanced control and information technologies, power electronics converters play an essential role in large-scale REN generation. However, the use of power converters has also exposed several challenges in conventional power grids, e.g., reducing the system inertia. In this article, grid integration using power electronics is presented for large-scale REN generation. Technical issues and requirements are discussed with a special focus on grid-connected wind, solar photovoltaic, and energy storage systems. In addition, the core of the energy generation and conversion—control for individual power converters (e.g., general current control) and for the system level (e.g., coordinated operation of large-scale energy systems)—is briefly discussed. Future research perspectives are then presented, which further advance large-scale REN generation technologies by incorporating more power electronics systems.

https://ieeexplore.ieee.org/ielx7/5/4357935/10070105.pdf

Nonlinear modeling and multi-scale damping characteristics of hydro-turbine regulation systems under complex variable hydraulic and electrical network structures

Modular multilevel converter (MMC) has been widely used in the multi-terminal overhead line high-voltage direct current (HVDC) system due to its outstanding performance. However, the AC side and the DC side of MMC-HVDC have a strong interaction and will be affected by each other's faults, which brings the risk of system instability. In this paper, a modified MMC named active MMC with embedded energy storage in submodules (SMs) is proposed to isolate the impact of faults as a firewall. Firstly, the topologies of the active MMC and SMs with energy storage are introduced. Then the operation principle of the active MMC under different faults is analyzed in a multi-terminal MMC-HVDC system. Thirdly, the complete control scheme of the active MMC is proposed for bidirectional fault isolation. Finally, two main application scenarios of the active MMC are simulated in a three-terminal MMC-HVDC system and a particularly designed AC/DC hybrid transmission system respectively in PSCAD/EMTDC. The simulation waveforms of the active MMC are compared with the conventional MMC. Simulation results show that the active MMC can effectively protect the AC system and DC system from each other's faults.

Modular Multilevel Converter with Embedded Energy Storage for Bidirectional Fault Isolation

The pole-to-ground fault is one of the most typical faults in modular multilevel converters (MMCs) based DC grid. Analyzing the transient characteristics of fault voltages and currents is of great significance for fault identification, configuration of protection, and optimization of system parameters. This paper proposes an equivalent transient characteristics calculation method for pole-to-ground faults for symmetrical monopolar MMC based DC grid. Firstly, according to the mechanism of the pole-to-ground faults, the fault network and the steady-state network are formed. Then, the star-delta transformation is performed on modelling the MMCs in the fault network, which overcomes the problem that the number of the inserted sub-modules (SMs) in each arm is time-variant. Based on the discrete adjoint model, the pre-fault and faulted matrices describing the voltages and currents are established, and a general method for solving the transient voltages and currents is proposed. Finally, the proposed method is validated in a four-terminal symmetrical monopolar MMC based DC grid. The results show that the proposed method is of high accuracy, and is much more time efficient than time-domain simulation.

/pdf/an-equivalent-calculation-method-for-pole-to-ground-fault-2hioioieav.pdf

An Equivalent Calculation Method for Pole-to-Ground Fault Transient Characteristics of Symmetrical Monopolar MMC Based DC Grid

Voltage stability analysis of power systems with a large number of non-synchronous machine sources connected

Mechanism analysis and mitigation strategies for oscillatory instability of synchronous generators affected by voltage source converters

The invention discloses a speed controller parameter optimization method for suppressing the ultralow-frequency oscillation of a hydropower generating set based on a critical parameter. The method discovers, based on a characteristic equation expression equation of the hydroelectric generating set, that the reason of the ultralow frequency oscillation is that the speed controller has an over-low ratio of the proportion parameter to the integral parameter. According to a mechanism analysis conclusion, the method comprises three following steps of: (1) setting the integral parameter and the differential parameter of the speed controller; (2) searching the critical proportion parameter of the speed controller; (3) optimizing the proportion parameter of the speed controller. The method can obviously suppress the ultralow-frequency oscillation by optimizing the parameter of the speed controller in the system, and is easy to operate and suitable for software offline simulation.

Speed controller parameter optimization method for suppressing ultralow-frequency oscillation of hydropower generating set based on critical parameter

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Guoteng Wang

Author Tools

Chat about Author