This research proposed an S-shaped metasurface (MTS)-based wideband circularly polarized (CP) patch antenna for C-band uplink frequency spectrum. The proposed MTS-based CP patch antenna was of low profile and fabricated on three substrate layers: upper, middle, and lower. The upper substrate contained $4\times 4$ periodic S-shaped MTS elements, the middle substrate functioned as ground plane with a rectangular-shaped slot at the center, and the lower substrate contained a coplanar waveguide with microstrip and ground. The S-shaped MTS elements converted linearly polarized (LP) into CP wave. Simulations were performed, and an antenna prototype was fabricated and experiments carried out. The measured impedance bandwidth and axial ratio bandwidth (ARBW) at the center frequency of 5.9 GHz were 43.22% (4.05 – 6.6 GHz) and 22% (5.3 – 6.6 GHz), respectively, rendering the proposed antenna suitable for satellite communication applications. The proposed antenna achieved the maximum gain of 6.16 dBic at 5.6 GHz. The novelty of this research lies in the use of S-shaped MTS elements to efficiently convert LP into CP wave and achieve wider ARBW for the C-band uplink spectrum.

/pdf/s-shaped-metasurface-based-wideband-circularly-polarized-3d7k7u6d6r.pdf

S-Shaped Metasurface-Based Wideband Circularly Polarized Patch Antenna for C-Band Applications


 In this research article, a metasurface (MTS)-loaded high-gain and broadband circularly polarized (CP) monopole antenna is reported. The proposed antenna configuration consists of a symmetric Y-shaped radiating monopole over a partial ground plane with extended twin parasitic conducting strips (PCS) loaded with a MTS reflector. To achieve left-hand circular polarization characteristics, a metallic copper strip is utilized to short the partial ground plane with one of the twin PCS [PCS(L)]. By using the grid-slotted sub patches on a rectangular MTS a reflector of 2λ
 fa
 × 1.65λ
 fa
 × 0.02λ
 fa
 is placed just below the monopole radiator at a height of 0.33λ
 fa
 , which provides broadened impedance (IBW) and 3 dB axial ratio bandwidth (ARBW) responses with high gain. The proposed prototype with an volumetric dimension of 1.33λ
 fa
 × 0.9λ
 fa
 × 0.02λ
 fa
 at f
 a
 = 5 GHz is designed and characterized. It exhibits a measured IBW of 48.45% (3.57–5.89 GHz), ARBW of 25.25% (4.21–5.42 GHz), and CP gain of > 8.35 dBic with the antenna efficiency of > 75% in the desired operating frequency bands. The obtained performances of the proposed MTS antenna confirm its suitability for RF energy harvesting application.

Investigation of a high-gain and broadband circularly polarized monopole antenna for RF energyharvesting application

In this paper, the design of a wideband circularly polarized (CP) bowtie slot antenna that uses metasurfaces is presented. The antenna consists of a single-layer substrate with the metasurface made of $4\times4$ periodic corner-truncated patches printed at the top side of the substrate and a bowtie-shaped slot etched on the ground plane. The metasurface made of corner-truncated patches are utilized to convert the linearly polarized wave into a CP wave. The antenna is fed by a 50- $\Omega $ coplanar waveguide. The antenna, with an overall size of 42 mm $\times42$ mm $\times2.3$ mm ( $0.71\,\,\lambda _{\mathrm {o}} \times 0.71\,\,\lambda _{\mathrm {o}} \times 0.038\,\,\lambda _{\mathrm {o}}$ at 5.1 GHz), was fabricated and measured. The measured reflection coefficient for $\vert \text{S}_{11}\vert dB yielded an impedance bandwidth of 3.75–6.67 GHz (55.7%), an axial ratio (AR) bandwidth of 4.38–5.98 GHz (31.37%), a 3-dB gain bandwidth of 3.75–6.0 GHz (46.88%), a peak gain of 7 dBic, and a high radiation efficiency of more than 93% within the AR bandwidth.

/pdf/low-profile-wideband-unidirectional-circularly-polarized-yb8yfbnqef.pdf

Low-Profile Wideband Unidirectional Circularly Polarized Metasurface-Based Bowtie Slot Antenna

A broadband dual circularly polarized shared-aperture antenna array using characteristic mode analysis for 5G applications

In this paper, a low-profile, broadband metasurface antenna for polarization conversion is proposed based on characteristic mode analysis (CMA). A new type of metasurface unit with a partially chamfered symmetrical triangular structure is designed. The inherent physical characteristics of the antenna are analyzed based on CMA, and the expected characteristic modes are selected for excitation at a suitable position. Slot-coupled feeding via microstrip line realizes the performance of wide impedance bandwidth and axial ratio bandwidth (ARBW). The measured -10 dB impedance bandwidth of 36.3% (4.38–6.32 GHz) and the 3 dB ARBW of 20.1% (5.41–6.62 GHz) are achieved. The left-hand circular polarization (LHCP) is realized, and the measured highest gain in the working frequency band is 6.05 dBic. The overall size of the designed and fabricated metasurface antenna is 0.58 λ 0 × 0.58 λ 0 × 0.07 λ 0 at 5 GHz. The proposed metasurface antenna can be well used in C-band satellite communications due to its low profile, broadband, and circular polarization.

A Low-Profile Broadband Metasurface Antenna With Polarization Conversion Based on Characteristic Mode Analysis

Design of a compact wideband CP metasurface antenna

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Guo Jing

Author Tools

Chat about Author

Papers

Design of a compact wideband CP metasurface antenna