Triple-junction solar cells from III–V compound semiconductors have thus far delivered the highest solar-electric conversion efficiencies. Increasing the number of junctions generally offers the potential to reach even higher efficiencies, but material quality and the choice of bandgap energies turn out to be even more importance than the number of junctions. Several four-junction solar cell architectures with optimum bandgap combination are found for lattice-mismatched III–V semiconductors as high bandgap materials predominantly possess smaller lattice constant than low bandgap materials. Direct wafer bonding offers a new opportunity to combine such mismatched materials through a permanent, electrically conductive and optically transparent interface. In this work, a GaAs-based top tandem solar cell structure was bonded to an InP-based bottom tandem cell with a difference in lattice constant of 3.7%. The result is a GaInP/GaAs//GaInAsP/GaInAs four-junction solar cell with a new record efficiency of 44.7% at 297-times concentration of the AM1.5d (ASTM G173-03) spectrum. This work demonstrates a successful pathway for reaching highest conversion efficiencies with III–V multi-junction solar cells having four and in the future even more junctions. Copyright © 2014 John Wiley & Sons, Ltd.

https://onlinelibrary.wiley.com/doi/pdf/10.1002/pip.2475

Wafer bonded four-junction GaInP/GaAs//GaInAsP/GaInAs concentrator solar cells with 44.7% efficiency

The highest solar cell conversion efficiencies are achieved with four-junction devices under concentrated sunlight illumination. Different cell architectures are under development, all targeting an ideal bandgap combination close to 1.9, 1.4, 1.0, and 0.7 eV. Wafer bonding is used in this work to combine materials with a significant lattice mismatch. Three cell architectures are presented using the same two top junctions of GaInP/GaAs but different infrared absorbers based on Germanium, GaSb, or GaInAs on InP. The modeled efficiency potential at 500 suns is in the range of 49–54% for all three devices, but the highest efficiency is expected for the InP-based cell. An efficiency of 46% at 508 suns was already measured by AIST in Japan for a GaInP/GaAs//GaInAsP/GaInAs solar cell and represents the highest independently confirmed efficiency today. Solar cells on Ge and GaSb are in the development phase at Fraunhofer ISE, and the first demonstration of functional devices is presented in this paper.

Four-Junction Wafer-Bonded Concentrator Solar Cells

This report summarizes the current status of the CPV industry and is updated from previous versions to include information from the last year. New information presented at the CPV-8 conference is included along with the addition of new companies that have announced their interest in CPV, and estimates of production volumes for 2011 and 2012.

/pdf/opportunities-and-challenges-for-development-of-a-mature-1xlar2lhmx.pdf

Opportunities and Challenges for Development of a Mature Concentrating Photovoltaic Power Industry (Revision)

The highest solar cell conversion efficiencies are achieved with Four-junction devices under concentrated sunlight illumination. Different cell architectures are under development, all targeting an ideal bandgap combination close to 1.9 eV, 1.4 eV, 1.0 eV and 0.7 eV. Wafer bonding is used in this work to combine materials with a significant lattice-mismatch. Three cell architectures are presented using the same two top junctions of GaInP/GaAs but different infrared absorbers based on Germanium, GaSb or GaInAs on InP. The modelled efficiency potential at 500 suns is in the range of 49–54 % for all three devices but the highest efficiency is expected for the InP-based cell. An efficiency of 46 % at 508-suns was already measured by AIST in Japan for a GaInP/GaAs//GaInAsP/GaInAs solar cell and represents the highest independently confirmed efficiency today. Solar cells on Ge and GaSb are in the development phase at Fraunhofer ISE and first demonstration of functional devices is presented in this paper.

Four-junction wafer bonded concentrator solar cells

This chapter discusses solar cells made of III–V semiconductors, and how they have reached efficiencies of over 46% in 2016, the highest of any photovoltaic technology to date. These high efficiencies are possible due to the ability of stacking solar cells made of different III–V semiconductors. The main focus of current research is on III–V multijunction solar cells with three or more junctions. III–V Solar cells are widely used in space applications, terrestrial concentrators as well as niche markets such as power-by-light or thermophotovoltaics. Today III–V devices find terrestrial applications only under high concentration. But III–V on silicon may be an attractive path to reduce cost and eventually penetrate this high-performance technology into conventional applications of flat-plate photovoltaics.

High-Efficiency III–V Multijunction Solar Cells

AZUR SPACE's current CPV product 3C40C is an advanced lattice‐matched In0.50Ga0.50P/In0.01Ga0.99As/Ge triple junction (3J) solar cell. Recently, efficiencies up to 41.2% (450–600×AM1.5d) have been confirmed for this 40%‐class product. This kind of solar cell structure has now reached its practical efficiency limit and went into production in 2010. AZUR offers customized cell structures, regarding size and grid design, as well as anti‐reflection coatings adapted to the individual CPV system. Integration grades from diced wafers up to assemblies, such as dense arrays, are available. Special features and production results for the 3C40C structure are presented in this work. In order to further push efficiencies beyond 42% AZUR has successfully transferred the upright metamorphic cell from Fraunhofer ISE and advances this concept now for production. First results on metamorphic 3J solar cells at AZUR SPACE and the actual potential of this concept will be discussed. A target efficiency of 42% seems to be reali...

III‐V Multijunction Solar Cells—New Lattice‐Matched Products And Development Of Upright Metamorphic 3J Cells

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

G. Strobl

Author Tools

Chat about Author

Papers

III‐V Multijunction Solar Cells—New Lattice‐Matched Products And Development Of Upright Metamorphic 3J Cells