Physical Unclonable Functions (PUFs) are innovative circuit primitives that extract secrets from physical characteristics of integrated circuits (ICs). We present PUF designs that exploit inherent delay characteristics of wires and transistors that differ from chip to chip, and describe how PUFs can enable low-cost authentication of individual ICs and generate volatile secret keys for cryptographic operations.

Physical Unclonable Functions for Device Authentication and Secret Key Generation

This paper describes the use of physical unclonable functions (PUFs) in low-cost authentication and key generation applications. First, it motivates the use of PUFs versus conventional secure nonvolatile memories and defines the two primary PUF types: “strong PUFs” and “weak PUFs.” It describes strong PUF implementations and their use for low-cost authentication. After this description, the paper covers both attacks and protocols to address errors. Next, the paper covers weak PUF implementations and their use in key generation applications. It covers error-correction schemes such as pattern matching and index-based coding. Finally, this paper reviews several emerging concepts in PUF technologies such as public model PUFs and new PUF implementation technologies.

Physical Unclonable Functions and Applications: A Tutorial

Modern cryptographic protocols are based on the premise that only authorized participants can obtain secret keys and access to information systems. However, various kinds of tampering methods have been devised to extract secret keys from conditional access systems such as smartcards and ATMs. Arbiter-based physical unclonable functions (PUFs) exploit the statistical delay variation of wires and transistors across integrated circuits (ICs) in manufacturing processes to build unclonable secret keys. We fabricated arbiter-based PUFs in custom silicon and investigated the identification capability, reliability, and security of this scheme. Experimental results and theoretical studies show that a sufficient amount of inter-chip variation exists to enable each IC to be identified securely and reliably over a practical range of environmental variations such as temperature and power supply voltage. We show that arbiter-based PUFs are realizable and well suited to build, for example, key-cards that need to be resistant to physical attacks.

Extracting secret keys from integrated circuits

This paper investigates the problem of partitioning a shared cache between multiple concurrently executing applications. The commonly used LRU policy implicitly partitions a shared cache on a demand basis, giving more cache resources to the application that has a high demand and fewer cache resources to the application that has a low demand. However, a higher demand for cache resources does not always correlate with a higher performance from additional cache resources. It is beneficial for performance to invest cache resources in the application that benefits more from the cache resources rather than in the application that has more demand for the cache resources. This paper proposes utility-based cache partitioning (UCP), a low-overhead, runtime mechanism that partitions a shared cache between multiple applications depending on the reduction in cache misses that each application is likely to obtain for a given amount of cache resources. The proposed mechanism monitors each application at runtime using a novel, cost-effective, hardware circuit that requires less than 2kB of storage. The information collected by the monitoring circuits is used by a partitioning algorithm to decide the amount of cache resources allocated to each application. Our evaluation, with 20 multiprogrammed workloads, shows that UCP improves performance of a dual-core system by up to 23% and on average 11% over LRU-based cache partitioning.

/pdf/utility-based-cache-partitioning-a-low-overhead-high-4t50s5xud2.pdf

Utility-Based Cache Partitioning: A Low-Overhead, High-Performance, Runtime Mechanism to Partition Shared Caches

We show in this paper how several proposed Physical Unclonable Functions (PUFs) can be broken by numerical modeling attacks. Given a set of challenge-response pairs (CRPs) of a PUF, our attacks construct a computer algorithm which behaves indistinguishably from the original PUF on almost all CRPs. This algorithm can subsequently impersonate the PUF, and can be cloned and distributed arbitrarily. This breaks the security of essentially all applications and protocols that are based on the respective PUF. The PUFs we attacked successfully include standard Arbited PUFs and Ring Oscillator PUFs of arbitrary sizes, and XO Arbiter PUFs, Lightweight Secure PUFs, and Feed-Forward Arbiter PUFs of up to a given size and complexity. Our attacks are based upon various machine learning techniques including Logistic Regression and Evolution Strategies. Our work leads to new design requirements for secure electrical PUFs, and will be useful to PUF designers and attackers alike.

/pdf/modeling-attacks-on-physical-unclonable-functions-uqecmaqblx.pdf

Modeling attacks on physical unclonable functions

This paper describes a technique that exploits the statistical delay variations of wires and transistors across ICs to build a secret key unique to each IC. To explore its feasibility, we fabricated a candidate circuit to generate a response based on its delay characteristics. We show that there exists enough delay variation across ICs implementing, the proposed circuit to identify individual ICs. Further. the circuit, functions reliably over a practical range of environmental variation such as temperature and voltage.

/pdf/a-technique-to-build-a-secret-key-in-integrated-circuits-for-g5vwr6ea0n.pdf

A technique to build a secret key in integrated circuits for identification and authentication applications

This paper proposes dynamic cache partitioning amongst simultaneously executing processes/threads. We present a general partitioning scheme that can be applied to set-associative caches.

Since memory reference characteristics of processes/threads can change over time, our method collects the cache miss characteristics of processes/threads at run-time. Also, the workload is determined at run-time by the operating system scheduler. Our scheme combines the information, and partitions the cache amongst the executing processes/threads. Partition sizes are varied dynamically to reduce the total number of misses.

The partitioning scheme has been evaluated using a processor simulator modeling a two-processor CMP system. The results show that the scheme can improve the total IPC significantly over the standard least recently used (LRU) replacement policy. In a certain case, partitioning doubles the total IPC over standard LRU. Our results show that smart cache management and scheduling is essential to achieve high performance with shared cache memory.

/pdf/dynamic-partitioning-of-shared-cache-memory-12hq9fymo5.pdf

Dynamic Partitioning of Shared Cache Memory

We propose a low overhead, online memory monitoring scheme utilizing a set of novel hardware counters. The counters indicate the marginal gain in cache hits as the size of the cache is increased, which gives the cache miss-rate as a function of cache size. Using the counters, we describe a scheme that enables an accurate estimate of the isolated miss-rates of each process as a function of cache size under the standard LRU replacement policy. This information can be used to schedule jobs or to partition the cache to minimize the overall miss-rate. The data collected by the monitors can also be used by an analytical model of cache and memory behavior to produce a more accurate overall miss-rate for the collection of processes sharing a cache in both time and space. This overall miss-rate can be used to improve scheduling and partitioning schemes.

/pdf/a-new-memory-monitoring-scheme-for-memory-aware-scheduling-397z9ytris.pdf

A new memory monitoring scheme for memory-aware scheduling and partitioning

We study the hardware cost of implementing hash-tree based verification of untrusted external memory by a high performance processor. This verification could enable applications such as certified program execution. A number of schemes are presented with different levels of integration between the on-processor L2 cache and the hash-tree machinery. Simulations show that for the best of our methods, the performance overhead is less than 25%, a significant decrease from the 10/spl times/ overhead of a naive implementation.

/pdf/caches-and-hash-trees-for-efficient-memory-integrity-gxngy8603h.pdf

Caches and hash trees for efficient memory integrity verification

This paper proposes a technique for dynamic cache partitioning amongst simultaneously executing processes/threads. We present a general partitioning scheme that can be applied to set-associative caches at any partition granularity. Fur- thermore, in our scheme, processes/threads can have overlapping partitions, which provides more degrees of freedom when partitioning caches with low associativity. Since memory reference characteristics of processes/threads can change very quickly, our method collects the miss-rate characteristics of processes/threads at run-time, and partitions the cache amongst the executing ones. Partition sizes are varied dynamically to improve miss-rates. Trace-driven simulation results show a relative improvement in the L2 hit-rate of up to 40.5% over those generated by the standard least recently used replacement policy, and IPC improvements of up to 17%. Our results show that smart cache management and scheduling is important for CMP/SMT systems to achieve high performance.

/pdf/dynamic-cache-partitioning-for-cmp-smt-systems-1xor6dg8g4.pdf

Dynamic Cache Partitioning for CMP/SMT Systems

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

G.E. Suh

Author Tools

Chat about Author