Biomass-derived materials have recently received considerable attention as lightweight, low-cost, and green microwave absorbers. On the other hand, sulfide nanostructures due to their narrow band gaps have demonstrated significant microwave characteristics. In this research, carbon microtubes were fabricated using a biowaste and then functionalized by a novel complementary solvothermal and sonochemistry method. The functionalized carbon microtubes (FCMT) were ornamented by CuCo2S4 nanoparticles as a novel spinel sulfide microwave absorber. The prepared structures illustrated narrow energy band gap and deposition of the sulfide structures augmented the polarizability, desirable for dielectric loss and microwave attenuation. Eventually, the architected structures were blended by polyacrylonitrile (PAN) to estimate their microwave absorbing and antibacterial characteristics. The antibacterial properties against Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) were scrupulously assessed. Noteworthy, the maximum reflection loss (RL) of the CuCo2S4/PAN with a thickness of 1.75 mm was 61.88 dB at 11.60 GHz, while the architected FCMT/PAN composite gained a broadband efficient bandwidth as wide as 7.91 GHz (RL > 10 dB) and 3.25 GHz (RL > 20 dB) with a thickness of 2.00 mm. More significantly, FCMT/CuCo2S4/PAN demonstrated an efficient bandwidth of 2.04 GHz (RL > 20 dB) with only 1.75 mm in thickness. Interestingly, FCMT/CuCo2S4/PAN and CuCo2S4/PAN composites demonstrated an electromagnetic interference shielding efficiency of more than 90 and 97% at the entire x and ku-band frequencies, respectively.

/pdf/architecting-functionalized-carbon-microtube-carrollite-z61xfp8mhg.pdf

Architecting functionalized carbon microtube/carrollite nanocomposite demonstrating significant microwave characteristics.

In this study, a self-healing hydrogel was prepared that is transparent to visible (Vis) light while absorbing ultraviolet (UV), infrared (IR), and microwave. The optothermal features of the hydrogel were explored by monitoring temperature using an IR thermometer under an IR source. The hydrogel was synthesized using sodium tetraborate decahydrate (borax) and polyvinyl alcohol (PVA) as raw materials based on a facile thermal route. More significantly, graphene oxide (GO) and graphite-like carbon nitride (g-C3N4) nanostructures as well as carbon microsphere (CMS) were applied as guests to more dissect their influence on the microwave and optical characteristics. The morphology of the fillers was evaluated using field emission scanning electron microscopy (FE-SEM). Fourier transform infrared (FTIR) attested that the chemical functional groups of the hydrogel have been formed and the result of diffuse reflection spectroscopy (DRS) confirmed that the hydrogel absorbs UV while is transparent in Vis light. The achieved result implied that the hydrogel acts as an essential IR absorber due to its functional groups desirable for energy efficiency and harvesting. Interestingly, the achieved results have testified that the self-healing hydrogels had the proper self-healing efficiency and self-healing time. Eventually, microwave absorbing properties and shielding efficiency of the hydrogel, hydrogel/GO, g-C3N4, or CMS were investigated, demonstrating the salient microwave characteristics, originated from the established ionic conductive networks and dipole polarizations. The efficient bandwidth of the hydrogel was as wide as 3.5 GHz with a thickness of 0.65 mm meanwhile its maximum reflection loss was 75.10 dB at 14.50 GHz with 4.55 mm in thickness. Particularly, the hydrogel illustrated total shielding efficiency (SET) > 10 dB from 1.19 to 18 and > 20 dB from 4.37 to 18 GHz with 10.00 mm in thickness. The results open new windows toward improving the shielding and energy efficiency using practical ways.

/pdf/preparation-of-self-healing-hydrogel-toward-improving-376ku70w3x.pdf

Preparation of self-healing hydrogel toward improving electromagnetic interference shielding and energy efficiency.

In this research, the energy and shielding efficiency of brick, fabricated by clay soil, as a practical building material was reinforced using CuFe2O4 nanoparticles. Initially, the nanoparticles were fabricated using the sol-gel method and then loaded in the brick matrix as a guest. The architected samples were characterized by X-ray powder diffraction (XRD), Fourier transform infrared (FTIR), diffuse reflection spectroscopy (DRS), field emission scanning electron microscopy (FE-SEM), High-resolution transmission electron microscopy (HRTEM), vibrating-sample magnetometer (VSM), differential scanning calorimetry (DSC) thermograms, and vector network analyzer (VNA) analyses. IR absorption of the tailored samples was monitored under an IR source using an IR thermometer. IR absorption and energy band gap attested that inserting the nanoparticles in brick medium led to the acceleration of a warming brick, desirable for energy efficiency in cold climates. It is worth noting that the brick/CuFe2O4 nanocomposite achieved a strong reflection loss (RL) of 58.54 dB and gained an efficient bandwidth as wide as 4.22 GHz (RL > 10 dB) with a thickness of 2.50 mm, meanwhile it shielded more than 58% of the electromagnetic waves at X-band by only a filler loading of 10 wt%. The microwave absorbing and shielding characteristics of the composite are mainly originated from conductive loss, electron hopping, natural and exchange resonance, relaxation loss, secondary fields, as well as eddy current loss. Interestingly, the shielding property of the nanocomposite was significantly generated from its absorbing features, reducing the secondary electromagnetic pollutions produced by the shielding materials applying the impedance mismatching mechanism.

/pdf/fabrication-of-clay-soil-cufe2o4-nanocomposite-toward-3ljsjl9tz4.pdf

Fabrication of clay soil/CuFe2O4 nanocomposite toward improving energy and shielding efficiency of buildings.

Flexible and leakage-proof phase change composite for microwave attenuation and thermal management

Multiferroic nanocomposites of xNiFe2O4/(1-x)BaTiO3 (x = 0, 0.1, 0.2, 0.3, and 0.4) (denoted as NFO-BTO) with the particle size about of 70 nm were prepared by the high energy mechanical milling combined with the thermal annealing methods. The x-ray diffraction patterns show a presence of NiFe2O4 (NFO) and BaTiO3 (BTO) phases. The values of the characteristic parameters of nanocomposites such as the coercive field (E c), the residual polarization (P r), the remanent magnetization (M r), the saturation magnetization (M s), and the coercive force (H c) increase gradually with an increase in NFO concentration. For an applied electric field below 10 kV cm−1, the values P r and E c are found to be 0.004–0.038 μC cm−2 and 0.7–2.0 kV cm−1, corresponding x = 0.1–0.4, respectively. Changes in electrical and magnetic properties of composites depend heavily on the NFO content, which will be studied specifically. Additionally, the ability to absorb microwave at room temperature of a representative sample with x = 0.3 mixed in acrylic paint (denoted as NFO-BTO-AP) in a frequency range of f = 12–18 GHz has also been investigated. It shows a large negative reflection loss (RL) with RL = −39.8 dB occurring at around 16.8 GHz corresponding to the absorptivity of over 99.9% for an absorbing layer with thickness of 5.5 mm. This suggests that NFO-BTO nanocomposites could be considered as a potential material in the field of absorbing and shielding electromagnetic waves.

Electrical, magnetic and microwave absorption properties of multiferroic NiFe2O4-BaTiO3 nanocomposites

Effectively broadening microwave absorbing frequency of pure magnetic substances remains a huge challenge. Herein, micro-perspective structures can be controlled through a calcination route. Satisfactorily, the composites prepared at the calcination temperature of 900 °C exhibit excellent microwave attenuation performance with a broad working frequency and appropriate paraffin filling ratio. Remarkably, the composites can reach an extremely high reflection loss (RL) value of - 49.79 dB, and the extended effective working frequency range (RL < - 10 dB) of 6.84 GHz can also be obtained. Superb magnetic loss, admirable dielectric loss, sufficient dipole polarization, as well as superior impedance matching should be band together for obtaining ideal microwave absorbers. The CoNi hydroxides derived bimatallic alloy composites were fabricated via a cost-effective and facile synthesis process, and this work aroused inspirations of designing high-performance microwave absorbers for mataining the sustainable development.

/pdf/extending-effective-microwave-absorbing-bandwidth-of-coni-hhtme0iqvf.pdf

Extending effective microwave absorbing bandwidth of CoNi bimetallic alloy derived from binary hydroxides.

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Fan Wang

Author Tools

Chat about Author

Papers

Extending effective microwave absorbing bandwidth of CoNi bimetallic alloy derived from binary hydroxides.