The subject of seismic detection of abnormally high‐pressured formations has received a great deal of attention in exploration and production geophysics because of increasing exploration and production activities in frontier areas (such as the deepwater) and a need to lower cost without compromising safety and environment, and manage risk and uncertainty associated with very expensive drilling. The purpose of this review is to capture the “best practice” in this highly specialized discipline and document it. Pressure prediction from seismic data is based on fundamentals of science, especially those of rock physics and seismic attribute analysis. Nonetheless, since the first seismic application in the 1960s, practitioners of the technology have relied increasingly on empiricism, and the fundamental limitations of the tools applied to detect such hazardous formations were lost. The most successful approach to seismic pressure prediction is one that combines a good understanding of rock properties of subsurf...

Geopressure prediction using seismic data: Current status and the road ahead

The present invention is a method for estimating formation properties (4), by analyzing acoustic waves (20) that are emitted from and received by a bottom hole assembly (14).

Method for borehole measurement of formation properties

In this thesis we address the problem of determining in situ stress and fracture properties in reservoirs using borehole logs and surface seismic reflection data. The dissertation covers four subtopics. The first is the determination of horizontal stress magnitudes from measurements in a borehole. Two types of data used are stress-induced rock failures in the borehole, known as "breakouts," and the dispersions of polarized flexural waves which propagate along the borehole. Traditionally these data are analyzed to derive stress orientations but not magnitudes. To determine the magnitude of stresses directly from breakouts, we use an iterative elastic modeling of stresses around the borehole and Mohr-Coulomb failure criterion to match the borehole deformation. As a second method we use dispersion curves of the two polarized flexural waves and their crossover points. These methods are applied to data from a well in northeastern Venezuela. The combination of these two techniques provides a complete profile of stress as a function of depth since the first method is applied at the breakout depths and the second is applied everywhere else in the borehole. Both borehole methods agree in the estimation of stress orientation and magnitude. The maximum horizontal stress is in the NNW-SSE direction, in agreement with a regional stress model calculated from the relative motions of the Caribbean and South America plates. The magnitudes of principal stresses are on average, SHmax ý 1.1Sv (Sv: vertical stress) and Shmin " 0.9Sv (Shmin: minimum horizontal stress). This suggests strike-slip faulting, consistent with earthquake mechanisms in the region. The in situ stresses play an important role on determining the properties of fractured formation. The azimuth of SHmax determines the preferred orientation of open fractures. Surface seismic reflection data provide the means for detecting the fractures. The second contribution of this thesis is developing a method to detect discrete fractures, and to determine their orientation and average spacing. We developed a novel and practical technique, called the F-K method, based on the frequencywavenumber (f-k) domain analysis of seismic coda. The fractured medium targeted in this study is a network of rather regularly spaced, parallel, sub-vertical fractures, with dimensions similar to seismic wavelength. The seismic response of a fractured medium is studied by finite difference numerical models for a variety of situations where orientation, spacing, height, and fracture compliance are varied. In the direction normal to fractures, scattered waves propagate with slower apparent velocities than waves propagating along the fractures. The orientation of fractures is wellconstrained from the azimuthal dependence of scattering. The spectral characteristics (frequency, wavenumber and amplitude) of the backscattered waves are related to fracture properties like spacing, compliance, and height. The dominant wavenumber is very sensitive to fracture spacing. We use the F-K method to analyze a data set from the Lynx Field in Canada. Characterization of fracture properties in this field is important for development plans to maximize the gas production. In the field data, the acquisition geometry results in irregular fold, with under sampling of certain azimuths and offsets. We address the acquisition footprint issue by controlling the azimuth binning of the data and neglecting the low/irregular fold gathers in the fracture analysis. We also apply the Scattering Index (SI) method (Willis et al., 2006) to the same data from the Lynx Field. The SI method is a robust method to detect fractures and to provide fracture orientations using multi-azimuth/multi-offset pre-stack data. In the realm of existing 3D seismic surveys, data with such acquisition characteristics are few. The fourth contribution of this thesis is therefore the conception of a post-stack version of the SI method that extends the scope of this method to practically every 3D seismic surface data set. In this version, a scattering index is computed for a fully stacked trace per CMP gather. As long as the bin contains traces parallel to the fracture strike, the stacking process of all azimuths and offsets preserves the reverberating character introduced by the fractures. The post-stack SI at a fractured location has a large value in comparison to a non-fractured location. The variations of post-stack SI values across the field reveal the distribution of highly fractured areas. Fracture strike cannot be determined in this case because it does not include the azimuthal behavior of the scattering. However, the results from the post-stack SI are helpful to identify areas of interest to focus the more specialized scattering analysis methods. We apply the F-K and SI methods to the Lynx Field seismic data and compare the results. Since spatial resolution of the two methods are different we upscale the SI maps to match the resolution of the F-K method. The combined analysis of the Lynx Field indicates that the preferred fracture orientation is N400E, which agrees with the regional stress field. The distribution of highly fractured regions appears to be associated to the geological features, such as folds and faults. The average fracture spacing, obtained by the F-K method shows that, in the Lynx Field, fracture spacing decreases in the west side of the field where the structural dips are higher. Thesis Supervisor: M. Nafi Toksiz Title: Professor of Geophysics Co-Thesis Advisor: Mark E. Willis Title: Research Scientist

Multiscale determination of in situ stress and fracture properties in reservoirs

High-Frequency Shallow Seismic Reflection Characterization of Overburden at an Abandon Pb-Zn Mine Beneath U.S. Highway 69 in Treece, Kansas Using Seismic Imaging and Vp/Vs Ratio

In deepwater exploration, due to a lack of well information, seismic data become the main means of predicting reservoirs and hydrocarbons. AVO is the most popular method to detect hydrocarbons. However, factors such as pressure, lithology, and thin‐bed effects can cause false AVO effects. The deepwater Gulf of Mexico, in addition to these complex factors, has simple‐to‐complex salt sheet morphologies. The evolution of these salt sheets through time significantly influences the accumulation and migration pathways of deepwater sediments. In this article, we propose that the hydrocarbon migration pathway and seal integrity can be better understood by combining information about pore‐fluid pressure, effective stress, lithology, and seismic energy attenuation.

Deepwater reservoir prediction using seismic and geomechanical methods

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Doug Steeb

Author Tools

Chat about Author

Papers

Deepwater reservoir prediction using seismic and geomechanical methods