Craig P. Jacobson
Lawrence Berkeley National Laboratory
53 Papers
1.1K Citations
Craig P. Jacobson is an academic researcher from Lawrence Berkeley National Laboratory. The author has contributed to research in topics: Solid oxide fuel cell & Oxide. The author has an hindex of 30, co-authored 53 publications. Previous affiliations of Craig P. Jacobson include University of California.
Chat about Author
Papers
Performance of metal-supported SOFCs with infiltrated electrodes
TL;DR: In this article, metal-supported solid oxide fuel cells (SOFCs) with thin YSZ electrolyte films and infiltrated Ni and LSM catalysts are operated in the temperature range 650-750°C.
204
Chromium vaporization of bare and of coated iron–chromium alloys at 1073 K
TL;DR: In this paper, the effect of ceramic coating layers, deposited by low-cost aerosol spraying or by dip coating, was evaluated and the morphology of the coating layer was observed and the chromium vaporization rates of bare and of coated iron-chromium alloys were measured at 1073 K.
177
Metal-supported solid oxide fuel cell membranes for rapid thermal cycling
TL;DR: In this paper, a solid oxide fuel cell (SOFC) membrane was developed in which zirconia-based electrolyte thin films were supported by a porous composite metal/ceramic current collector and were subjected to rapid thermal cycling between 475 and 1075 K (200 and 800 °C).
158
Y-doped SrTiO3 based sulfur tolerant anode for solid oxide fuel cells
TL;DR: In this article, a solid oxide fuel cell (SOFC) anode with high sulfur tolerance was developed starting from a Y-doped SrTiO3 (SYTO)-yttria stabilized zirconia (YSZ) porous electrode backbone, and infiltrated with nano-sized catalytic ceria and Ru.
158
A fundamental study of chromium deposition on solid oxide fuel cell cathode materials
TL;DR: Chromium contamination of metal oxides and SOFC cathode catalysts in the range 700-1000°C was studied in this article, where samples are exposed to a moist air atmosphere saturated with volatile Cr species in the presence and absence of direct contact between the sample and ferritic stainless steel powder.
146