Life cycle assessment of building materials: Comparative analysis of energy and environmental impacts and evaluation of the eco-efficiency improvement potential

An environmental evaluation of geopolymer based concrete production: reviewing current research trends

The use of cement and concrete, among the most widely used man-made materials, is under scrutiny. Owing to their large-scale use, production of cement and concrete results in substantial emission of greenhouse gases and places strain on the availability of natural resources, such as water. Projected urbanization over the next 50–100 years therefore indicates that the demand for cement and concrete will continue to increase, necessitating strategies to limit their environmental impact. In this Review, we shed light on the available solutions that can be implemented within the next decade and beyond to reduce greenhouse gas emissions from cement and concrete production. As the construction sector has proven to be very slow-moving and risk-averse, we focus on minor improvements that can be achieved across the value chain, such as the use of supplementary cementitious materials and optimizing the clinker content of cement. Critically, the combined effect of these marginal gains can have an important impact on reducing greenhouse gas emissions by up to 50% if all stakeholders are engaged. In doing so, we reveal credible pathways for sustainable concrete use that balance societal needs, environmental requirements and technical feasibility. Concrete is one of the most widely used man-made materials and is critical for the ongoing urbanization of the global population. However, owing to its widespread use, concrete can have a negative impact on the environment. This Review provides medium-term and long-term solutions to address the environmental concerns surrounding concrete production.

/pdf/environmental-impacts-and-decarbonization-strategies-in-the-2v8xetia8b.pdf

Environmental impacts and decarbonization strategies in the cement and concrete industries

The cement subsector consumes approximately 12–15% of the total industrial energy use. Therefore, this subsector releases CO2 emissions to the atmosphere as a result of burning fossil fuels to produce energy needed for the cement manufacturing process. The cement industry contributes about 7% of the total worldwide CO2 emissions. This study complied a comprehensive literature in terms of Thesis (MS and PhD), peer reviewed journals papers, conference proceedings, books, reports, websites for emission generation and mitigation technique. Emission released associated with the burning of fuels have been presented in this paper. Different sources of emissions in a cement industry has been identified and presented in this study. Different techniques to reduce CO2 emissions from the cement manufacturing industries are reviewed and presented in this paper. The major techniques are: capture and storage CO2 emissions, reducing clinker/cement ratio by replacing clinker with different of additives and using alternative fuels instead of fossil fuels. Apart from these techniques, various energy savings measures in cement industries expected to reduce indirect emissions released to the atmosphere. Based on review results it was found that sizeable amount of emission can be mitigated using different techniques and energy savings measures.

A review on emission analysis in cement industries

The cement sub-sector consumes approximately 12–15% of total industrial energy use. Therefore, a state of art review on the energy use and savings is necessary to identify energy wastage so that necessary measures could be implemented to reduce energy consumption in this sub-sector. In this paper energy use at different sections of cement industries, specific energy consumption, types of energy use, details of cement manufacturing processes, various energy savings measures were reviewed and presented. Various energy savings measures were critically analyzed considering amount of energy that can be saved along with the implementation cost. Amount of CO2 reduction has been presented along with the payback period for different energy savings measures as well. This study complied a comprehensive literature on the cement industries in terms of Thesis (MS and PhD), peer reviewed journals papers, conference proceedings, books, reports, websites. It has been observed that China producing major share of global cement production. Coal contribute major share of fuel used in cement industries. However, along with conventional fuels, industries are moving towards the use of alternative fuels to reduce environmental pollution. It was reported that cement industries are moving from wet process to dry process as it consume less energy compared to wet process.

A critical review on energy use and savings in the cement industries

http://www.iust.ac.ir/files/crc/yekta_program/forum/f64034c522.pdf

Cement Production Technology Improvement Compared to Factor 4 Objectives

: INSPIRE-SAT7 is a French 2-Unit CubeSat (11.5 × 11.5 × 22.7 cm) primarily designed for Earth and Sun observation. INSPIRE-SAT7 is one of the missions of the International Satellite Program in Research and Education (INSPIRE). Twice the size of a 4 × 4 Rubik’s Cube and weighing about 3kg, INSPIRE-SAT7 will be deployed in Low Earth Orbit (LEO) in 2023 to join its sister satellite, UVSQ-SAT. INSPIRE-SAT7 represents one of the in-orbit demonstrators needed to test how two Earth observation CubeSats in orbit can be utilized to set up a satellite constellation. This new scientiﬁc and technological pathﬁnder CubeSat mission (INSPIRE-SAT7) uses a multitude of miniaturized sensors on all sides of the CubeSat to measure the Earth’s energy budget components at the top-of-the-atmosphere for climate change studies. INSPIRE-SAT7 contains also a High-Frequency (HF) payload that will receive HF signals from a ground-based HF transmitter to probe the ionosphere for space weather studies. Finally, this CubeSat is equipped with several technological demonstrators (total solar irradiance sensors, UV sensors to measure solar spectral irradiance, a new Light Fidelity (Li-Fi) wireless communication system, a new versatile telecommunication system suitable for CubeSat). After introducing the objectives of the INSPIRE-SAT7 mission, we present the satellite deﬁnition and the mission concept of operations. We also brieﬂy show the observations made by the UVSQ-SAT CubeSat, and assess how two CubeSats in orbit could improve the information content of their Earth’s energy budget measurements. We conclude by reporting on the potential of future missions enabled by CubeSat constellations.

INSPIRE-SAT 7, a Second CubeSat to Measure the Earth’s Energy Budget and to Probe the Ionosphere

Climate change is undeniably one of the most pressing and critical challenges facing humanity in the 21st century. In this context, monitoring the Earth’s Energy Imbalance (EEI) is fundamental in conjunction with greenhouse gases (GHGs) in order to comprehensively understand and address climate change. The French Uvsq-Sat NG pathfinder mission addresses this issue through the implementation of a Six-Unit CubeSat, which has dimensions of 111.3 × 36.6 × 38.8 cm in its unstowed configuration. Uvsq-Sat NG is a satellite mission spearheaded by the Laboratoire Atmosphères, Observations Spatiales (LATMOS), and supported by the International Satellite Program in Research and Education (INSPIRE). The launch of this mission is planned for 2025. One of the Uvsq-Sat NG objectives is to ensure the smooth continuity of the Earth Radiation Budget (ERB) initiated via the Uvsq-Sat and Inspire-Sat satellites. Uvsq-Sat NG seeks to achieve broadband ERB measurements using state-of-the-art yet straightforward technologies. Another goal of the Uvsq-Sat NG mission is to conduct precise and comprehensive monitoring of atmospheric gas concentrations (CO2 and CH4) on a global scale and to investigate its correlation with Earth’s Outgoing Longwave Radiation (OLR). Uvsq-Sat NG carries several payloads, including Earth Radiative Sensors (ERSs) for monitoring incoming solar radiation and outgoing terrestrial radiation. A Near-Infrared (NIR) Spectrometer is onboard to assess GHGs’ atmospheric concentrations through observations in the wavelength range of 1200 to 2000 nm. Uvsq-Sat NG also includes a high-definition camera (NanoCam) designed to capture images of the Earth in the visible range. The NanoCam will facilitate data post-processing acquired via the spectrometer by ensuring accurate geolocation of the observed scenes. It will also offer the capability of observing the Earth’s limb, thus providing the opportunity to roughly estimate the vertical temperature profile of the atmosphere. We present here the scientific objectives of the Uvsq-Sat NG mission, along with a comprehensive overview of the CubeSat platform’s concepts and payload properties as well as the mission’s current status. Furthermore, we also describe a method for the retrieval of atmospheric gas columns (CO2, CH4, O2, H2O) from the Uvsq-Sat NG NIR Spectrometer data. The retrieval is based on spectra simulated for a range of environmental conditions (surface pressure, surface reflectance, vertical temperature profile, mixing ratios of primary gases, water vapor, other trace gases, cloud and aerosol optical depth distributions) as well as spectrometer characteristics (Signal-to-Noise Ratio (SNR) and spectral resolution from 1 to 6 nm).

Uvsq-Sat NG, a New CubeSat Pathfinder for Monitoring Earth Outgoing Energy and Greenhouse Gases

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Catherine Billard

Author Tools

Chat about Author

Papers

Cement Production Technology Improvement Compared to Factor 4 Objectives

INSPIRE-SAT 7, a Second CubeSat to Measure the Earth’s Energy Budget and to Probe the Ionosphere

Uvsq-Sat NG, a New CubeSat Pathfinder for Monitoring Earth Outgoing Energy and Greenhouse Gases