This work presented a point-of-care (POC) photoelectrochemical (PEC) biosensing for the detection of human papillomavirus-16 (HPV-16) on a portable electrochemical detection system by using CRISPR-Cas12a trans-cleaving the G-quadruplex for the biorecognition/amplification and a hollow In2O3-In2S3-modified screen-printed electrode (In2O3-In2S3/SPE) as the photoactive material. G-quadruplexes were capable of biocatalytic precipitation (H2O2-mediated 4-chloro-1-naphthol oxidation) on the In2O3-In2S3/SPE surface, resulting in a weakened photocurrent, but suffered from trans-cleavage when the CRISPR-Cas12a system specifically recognized the analyte. The photocurrent results could be directly observed with the card-sized electrochemical device via a smartphone, which displayed a high-value photocurrent for these positive samples, while a low-value photocurrent for the target-free samples. Such a system exhibited satisfying photocurrent responses toward HPV-16 within a wide working range from 5.0 to 5000 pM and allowed for detection of HPV-16 at a concentration as low as 1.2 pM. The proposed assay provided a smartphone signal readout to enable the rapid screening PEC determination of HPV-16 concentration without sophisticated instruments, thus meeting the requirements of remote areas and resource-limited settings. We envision that combining an efficient biometric PEC sensing platform with a wireless card-sized electrochemical device will enable high-throughput POC diagnostic analysis.

CRISPR-Cas12a-Derived Photoelectrochemical Biosensor for Point-Of-Care Diagnosis of Nucleic Acid.

Flexible wearable sweat sensors allow continuous, real-time, noninvasive detection of sweat analytes, provide insight into human physiology at the molecular level, and have received significant attention for their promising applications in personalized health monitoring. Electrochemical sensors are the best choice for wearable sweat sensors due to their high performance, low cost, miniaturization, and wide applicability. Recent developments in soft microfluidics, multiplexed biosensing, energy harvesting devices, and materials have advanced the compatibility of wearable electrochemical sweat-sensing platforms. In this review, we summarize the potential of sweat for medical detection and methods for sweat stimulation and collection. This paper provides an overview of the components of wearable sweat sensors and recent developments in materials and power supply technologies and highlights some typical sensing platforms for different types of analytes. Finally, the paper ends with a discussion of the challenges and a view of the prospective development of this exciting field. 

/pdf/wearable-and-flexible-electrochemical-sensors-for-sweat-1w820kbe.pdf

Wearable and flexible electrochemical sensors for sweat analysis: a review

MXenes, transition metal carbide and nitrides with graphene-like structures, have received numerous attention since they were synthesized from MAX phases in 2011. As a rising star in 2D material family, MXenes exhibit charming physical and chemical properties. The superiority in 2D flak structure, combined with rich functional groups, endows MXenes abundant tunable performance and also makes them show unique advantages in various fields. Furthermore, the special structural and functional features also make MXenes and MXene-based materials easy to combine with polymer matrices to meet its high-performance requirements in electrical, thermal, mechanical and other fields. Now, a variety of synthetic methods of MXenes have been explored to suit different application, from hydrofluoric acid to fluorinate-containing acid solution and fluorinate-containing salts. Moreover, diverse modification methods were studied based on abundant terminations of MXene, which are also reviewed. In addition, the fabrication method and performances of MXene/polymer composites are also invested to explore the influence of MXenes on the properties of composite materials. Subsequently, the applications of MXene-based polymeric composites with different properties were also reviewed to explore their application prospects. Lastly, based on current development situation of MXenes, the challenges and prospects for the development of MXene/polymer composites are discussed. In view of the splendid performance of MXenes, obviously, it is certain that MXenes would play a vital role in polymer composites and bring considerable prospects for the development of high-performance composite materials.

MXene as emerging nanofillers for high-performance polymer composites: A review

Large-scale, rapid, and inexpensive serological diagnoses of severe acute respiratory syndrome-coronavirus-2 (SARS-CoV-2) are of great interest in reducing virus transmission at the population level; however, their development is greatly plagued by the lack of available point-of-care methods, leading to low detection efficiency. Herein, an ultrasensitive smartphone-based electrochemical immunoassay is reported for rapid (less than 5 min), low-cost, easy-to-implement detection of the SARS-CoV-2 nucleocapsid protein (SARS-CoV-2 N protein). Specifically, the electrochemical immunoassay was fabricated on a screen-printed carbon electrode coated with electrodeposited gold nanoparticles, followed by incubation of anti-N antibody (Ab) and bovine serum albumin as the working electrode. Accompanied by the antigen–antibody reaction between the SARS-CoV-2 N protein and the Ab, the electron transfer between the electroactive species [Fe(CN)6]3–/4– and the electrode surface is disturbed, resulting in reduced square-wave voltammetry currents at 0.075 V versus the Ag/AgCl reference electrode. The proposed immunoassay provided a good linear range with SARS-CoV-2 N protein concentrations within the scope of 0.01–1000 ng/mL (R2 = 0.9992) and the limit of detection down to 2.6 pg/mL. Moreover, the detection data are wirelessly transmitted to the interface of the smartphone, and the corresponding SARS-CoV-2 N protein concentration value is calculated and displayed. Therefore, the proposed portable detection mode offers great potential for self-differential diagnosis of residents, which will greatly facilitate the effective control and large-scale screening of virus transmission in resource-limited areas.

Smartphone-Based Electrochemical Immunoassay for Point-of-Care Detection of SARS-CoV-2 Nucleocapsid Protein

Point-of-care testing (POCT) technology has made major breakthroughs in community medicine and physician office situations, in tandem with the more ubiquitous and intensive usage of highly integrated quick detection equipment for illness diagnosis, personal care, and mobile healthcare. Although the photoelectrochemical (PEC)-based POCT platform offers the benefits of cheap cost and good user engagement, its commercialization is still limited by the photodetection components' downsizing and mobility, among other factors. In this work, a novel highly integrated PEC biosensor aided by piezophototronics to enhance the efficiency of PEC testing was reported for flexible detection of cancer-associated antigens in biological fluids (prostate-specific antigen, PSA, used as an example). Multiple signal enhancement strategies, including a magnetic bead-linked enzyme-linked immune system catalyzing the production of ascorbic acid from the substrate and a piezoelectric-assisted enhancement strategy, were used for sensitive detection of the analyte to be tested in human body fluids. Unlike the electron transfer mechanism in heterojunctions, piezoelectric semiconductors promote the transfer of electrons and holes by generating piezoelectric potentials in the ultrasonic field, thus contributing to the performance of the PEC testbed. Under optimized conditions, the test platform achieves good correspondence for PSA at 0.02-40 ng mL-1. Impressively, the test devices are comparable to or even superior to gold standard ELISA kits in terms of cost approval and batch testing. This research demonstrates the potential of piezoelectric semiconductors for POC applications in revolutionary PECs and offers innovative thoughts for the development of new PEC bioanalytical components.

Exploiting Photoelectric Activities and Piezoelectric Properties of NaNbO3 Semiconductors for Point-of-Care Immunoassay.

CRISPR-Cas12a-driven MXene-PEDOT:PSS piezoresistive wireless biosensor

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

Caicheng Wang

Author Tools

Chat about Author

Papers

CRISPR-Cas12a-driven MXene-PEDOT:PSS piezoresistive wireless biosensor