Within the framework of the LHC Injector Upgrade (LIU), the new LINAC4 is currently being commissioned to replace the existing LINAC2 proton source at CERN. After the expected completion at the end of 2016, the LINAC4 will accelerate H − ions to 160 MeV. To measure the transverse emittance of the H − beam, a method based on photo-detachment is proposed. This system will operate using a pulsed laser with light delivered via an optical fibre and subsequently focused onto the H − beam. The laser photons have sufficient energy to detach the outer electron and create H 0 /e − pairs. In a downstream dipole, the created H 0 particles are separated from the unstripped H − ions and their distribution is measured with a dedicated detector. By scanning the focused laser beam across the H − beam, the transverse emittance of the H − beam can be reconstructed. This paper will first discuss the concept, design and simulations of the laser emittance scanner and then present results from a prototype system used during the 12 MeV commissioning of the LINAC4.

/pdf/experimental-results-of-the-laserwire-emittance-scanner-for-3e02grghda.pdf

Experimental results of the laserwire emittance scanner for LINAC4 at CERN

The 160 MeV H− beam from the Linac4 (L4) linear accelerator at CERN will be injected into the proton synchrotron booster (PSB) with a new H− charge-exchange injection system. It will include a stripping foil, to convert H− into protons by stripping off the electrons. To gain experience with these very fragile foils, prior to the installation in the PSB, and test different foil materials and thicknesses, lifetimes of the foils, the foil changing mechanism and interlocking functions, a stripping foil test stand will be installed in the L4 transfer line in 2015. This paper describes the mechanical design of the system and discusses the test possibilities and parameters.

/pdf/the-stripping-foil-test-stand-in-the-linac4-transfer-line-5fgizigg8c.pdf

The stripping foil test stand in the Linac4 transfer line

The changeover from Linac2 to Linac4 in CERN’s injector chain will allow increasing the injection energy into the PS Booster from 50 MeV to 160 MeV [1]. Transverse phase space painting will be performed in the horizontal plane, by means of four stacks of four KSW kicker magnets. The KSW magnets are located outside the injection region and will produce a 35 mm closed orbit bump, with falling amplitude during the injection to accomplish transverse phase space painting to the required emittance. New magnets with two different types of coils are being built using the existing design. The magnets are made of two halves, which are assembled together around a vacuum ceramic chamber. In order to reduce the beam impedance, the ceramic chamber is internally coated by a thin titanium layer. A new multiplelinear waveform generator has been developed to provide the high flexibility in the KSW kicker magnets current decay to fulfil the requirements of all the different users (LHC, nTOF, ISOLDE, CNGS, etc.).

/pdf/a-new-hardware-design-for-psb-kicker-magnets-ksw-for-the-35-3uew2zo6nz.pdf

A NEW HARDWARE DESIGN FOR PSB KICKER MAGNETS (KSW) FOR THE 35 mm TRANSVERSE PAINTING IN THE HORIZONTAL PLANE

In 2020, after the CERN accelerators complex Long Shutdown 2 (LS2), a novel Linac4 (L4)-to-PS Booster (PSB) charge-exchange injection system will allow to transform the L4 160 MeV H- beam into H+ , which will be injected into the four PSB superposed rings. For this, a 200 µg/cm2 carbon stripping foil will convert negative hydrogen ions (H- ) into protons by stripping off the electrons. L4 is now performing operational reliability runs, which include a stripping foil test stand installed in the L4 transfer line. These tests will permit to gain experience on the fragile foils, test different foil materials and thicknesses, measure the efficiency and lifetime of the foils, and evaluate the foil changing mechanism as well as the interlocking functions. This paper briefly describes the stripping foil test stand setup, before reporting on the obtained important test results.

/pdf/measurements-with-the-stripping-foil-test-stand-in-the-27h35rltzd.pdf

Measurements with the stripping foil test stand in the Linac4 Transfer Line

The CERN PS Booster (PSB) is presently undergoing an ambitious consolidation and upgrade program within the frame of the LHC Injectors Upgrade (LIU) project. This program comprises a new injection scheme for Hions from CERN’s new Linac4, the replacement of the main RF systems and an energy upgrade of the PSB rings from 1.4 to 2 GeV which includes the replacement of the main magnet power supply as well as the upgrade of the extraction equipment. This paper describes the status and plans of this work program.

/pdf/status-of-the-upgrade-of-the-cern-ps-booster-375da3e2ky.pdf

Status of the upgrade of the cern ps booster

/pdf/status-of-the-160meb-h-injection-into-the-cern-psb-4pspi97c8u.pdf

STATUS OF THE 160MeB H-INJECTION INTO THE CERN PSB

Handle everyday research tasks with reliable, citation-backed results

Your personal Research Agent to handle research tasks with citation-backed results

Popular Tasks used by Researchers

How can I help with your research?

Meet SciSpace

Get more enhanced response by uploading the PDFs you want me to reference.

No relevant PDFs in your library

SciSpace is the AI research assistant for academics. Run systematic literature reviews on 280M+ papers, and write papers with cited sources. Trusted by 1M+ students, PhDs & researchers.

SciSpace | AI for Research

Analyze PDFs

Code & Manuscripts

Funding & Grants

Literature & Patents

Medical & Clinical Data

Systematic Review

Visualize & Present

Web & Data

Build a Google Scholar-like website for your research.

Build a website

Create charts and images for your research

Create a Chart

Write a paper for submission to a journal

Draft a manuscript

Patent Search

Design eye-catching scientific posters in minutes.

Scientific Poster Generation

Systematic Literature Review

One task is running at the moment. Your messages will be shown right after.

Drag and drop or click here to browse

Loved by <highlight>1 million+</highlight> researchers

Extract a list of specific topics and their sources from unstructured text

Topics

Compare and analyze relevant papers that matches with your search

Papers

Get insights from PDFs and bookmarked papers from your library

My library

Recent searches

Try searching for:

Catch AI-generated content in scholarly and non-scholarly content

{ai} Detector

Ai Writer

Get PDF Summaries, highlighted text explanations 

Chat with PDF

Effortlessly create in-text citations and bibliographies in APA and 2,500 other formats

Citation generator

Get explanations, summaries, and answers on academic papers

Ease up your research workflow with {scispace}'s cohort of exciting AI tools

Elevate your academic writing skills and convey your ideas the way you want

Paraphraser

Explore our range of reading and writing tools

Your file is being prepared and should be ready in a few minutes. If it's a large file, it might take a bit longer. You can close this window, and we'll email you the file when it's done.

You have reached a maximum limit of <strong>{limit}</strong> columns in the table. Remove at least <strong>1</strong> column to add or create another one.

C.Bracco

Author Tools

Chat about Author

Papers

STATUS OF THE 160MeB H-INJECTION INTO THE CERN PSB